Looking to build a "Stroker" in Texas - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Urbs1391 · 12-05-2014, 09:17 AM

I am ready for a nice upgrade and looking for a builder in Texas that can help me out. I’m in Corpus Christi and will have no problem getting the car where it needs to be. I don’t necessarily have a “Power-Need”, I am looking for a reliable yet a bit aggressive 418 stroker build. If interested please PM me so I can contact you. I am looking to get this done as soon as I work out a deal with a builder, so if need be it can be tomorrow.

NorthTex45thSS · 12-07-2014, 10:15 PM

Id recommend Andy at ADM Performance, Sam Miller at Advanced Modern Performance, or Lethal performance. I have friends that have had extensive big power builds from those three with great results and longevity. Or you could buy a stroked 416 418 from Texas Speed and Performance and swap the motors yourself. If your not looking for a certain goal or custom setup for a particular need, then I would look at a 418 crate motor for more of a plug and play option. Will save cost to pull one out, drop new in and tune verses pull, tare down, reassemble install and then tune. just my opinion. Any way congrats and good luck with the project!

bkscott · 12-08-2014, 12:23 AM

I 2nd, Andy and ADM. You won't be sorry. Does amazing work.

ST1LE · 12-08-2014, 09:49 AM

If you are willing to go all the way to Dallas, I would check out Lethal Racing first as Lafayette is probably a little closer or right about the same as Dallas.

Vroom_vroom · 12-08-2014, 10:11 AM

I thought you all just called gas monkey out there .......

Taco Time · 12-08-2014, 10:44 AM

Quote:

Originally Posted by Vroom_vroom

I thought you all just called gas monkey out there .......

62nalide · 12-26-2014, 01:04 PM

Billy Ray Motorsports starting at $4,900.00

HP Motorsports · 12-29-2014, 10:50 AM

Thank you Urbs1391 for choosing us to help you complete your project.
Parts are starting to roll in for your build. In the next day or so I should have time to send you pics etc.

Urbs1391 · 12-31-2014, 02:44 AM

Quote:

Originally Posted by HP Motorsports

Thank you Urbs1391 for choosing us to help you complete your project.
Parts are starting to roll in for your build. In the next day or so I should have time to send you pics etc.

Absolutely, Thanks for reaching out and helping me understand what I was going to get myself into. I wait with anticipation of the final result. I know it's in good hands now.

Thanks for everything so far.

HP Motorsports · 01-03-2015, 12:59 PM

Quote:

Originally Posted by Urbs1391

Absolutely, Thanks for reaching out and helping me understand what I was going to get myself into. I wait with anticipation of the final result. I know it's in good hands now.

Thanks for everything so far.

No problem at all , glad to help. We are excited to see the finished product as well.

12-05-2014, 09:17 AM	#1
Urbs1391 Drives: 2012 45th SS Join Date: Mar 2013 Location: Corpus Christi, Tx. Posts: 73	Looking to build a "Stroker" in Texas I am ready for a nice upgrade and looking for a builder in Texas that can help me out. I’m in Corpus Christi and will have no problem getting the car where it needs to be. I don’t necessarily have a “Power-Need”, I am looking for a reliable yet a bit aggressive 418 stroker build. If interested please PM me so I can contact you. I am looking to get this done as soon as I work out a deal with a builder, so if need be it can be tomorrow.

12-07-2014, 10:15 PM	#2
NorthTex45thSS Drives: 2012 45th SS Join Date: Jul 2012 Location: DFW, Tx Posts: 144 View My Garage	Id recommend Andy at ADM Performance, Sam Miller at Advanced Modern Performance, or Lethal performance. I have friends that have had extensive big power builds from those three with great results and longevity. Or you could buy a stroked 416 418 from Texas Speed and Performance and swap the motors yourself. If your not looking for a certain goal or custom setup for a particular need, then I would look at a 418 crate motor for more of a plug and play option. Will save cost to pull one out, drop new in and tune verses pull, tare down, reassemble install and then tune. just my opinion. Any way congrats and good luck with the project! __________________ 2012 45th RS/SS ADM Perfomance intake, ADM tuned, Stainless Works headers/no cats, 3" magnaflow comp exhaust, 160º thermostat, Nitto NT05R's, 387rwhp/396tq 95 Kenworth W900L powered by CAT 13 spd

12-08-2014, 12:23 AM	#3
bkscott Drives: 2010 Camaro 2SS/RS Join Date: Dec 2009 Location: Grand Prairie, Texas Posts: 1,608 View My Garage	I 2nd, Andy and ADM. You won't be sorry. Does amazing work. __________________ 94 Firebird Formula (Drowned 08/30/05) 2010 IBM 2SS/RS 6M Arrived 3/25/10. ADM CAI, Borla Type S Cat Back, VMAX Ported TB, LG Short Throw Shifter, 1LE Shocks, Hotchkis Sway Bars, Whiteline Cradle Bushing Inserts, Custom Powdercoated ZL1's ,Michelin Pilot Supersports, Stainless Power Headers, Solo J Pipes, AAC LED Sidemarkers, ZL1 Rockers, SLP Splitter, ADM Stage II Cam,ZL1 Diffuser,Vitesse Throttle Controller.

12-08-2014, 09:49 AM	#4
ST1LE Drives: E92 BMW M3 Join Date: Oct 2012 Location: Houston Posts: 4,496	If you are willing to go all the way to Dallas, I would check out Lethal Racing first as Lafayette is probably a little closer or right about the same as Dallas. __________________ SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs. J-Rod Built and Matt@FSP Tuned

12-08-2014, 10:11 AM	#5
Vroom_vroom The gritos pollo!!! Drives: Like a idiot Join Date: Jul 2012 Location: Las Vegas Posts: 1,215 View My Garage	I thought you all just called gas monkey out there ....... __________________ ______ If you don't stop how can they give you a ticket?-The Big Tuna___ '12 1Ls Camaro; Slp loud mouth I\|maganflow x-pipe\|Injen long ram intake\|brembo brake upgrade\| russell s.s. lines\|2LT polished 19's\|billet 5mm spacers\|tinted tail lights&markers\|pdmi\|billet c. can\| '13 Avenger R/T '77 T/A 6.6;, draining my wallet.

12-26-2014, 01:04 PM	#7
62nalide Drives: 2013 SS Join Date: May 2013 Location: DFW Posts: 4,102	Billy Ray Motorsports starting at $4,900.00 __________________ https://frankensteined.net/ Martin@Frankensteined.net

12-29-2014, 10:50 AM	#8
HP Motorsports Drives: 5th Gen Join Date: Dec 2014 Location: Katy (Houston) Posts: 41	Thank you Urbs1391 for choosing us to help you complete your project. Parts are starting to roll in for your build. In the next day or so I should have time to send you pics etc.