Atlanta Club Lounge - Page 1189 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

blake2010ss · 03-22-2014, 11:01 PM

Quote:

Originally Posted by Xanytos

If i didn't get a free meal, NO ONE was getting a free meal lol

But hey, you did get free appetizers!

Yea that's true.

Sent from my XT1080 using Tapatalk

OK2DRUL · 03-23-2014, 06:21 PM

Got the Pfadt drop springs, toe rods, and trailing arms installed today with a little help from Jeff and a lot of help from his friend Josh. Looking forward to the sway bars, sub frame, and differential bushings next month!

nitto85 · 03-23-2014, 06:29 PM

Looks real good OK2DRUL.

mrpyle · 03-23-2014, 08:29 PM

Any of you blacked-out the emblems on the fenders? I see Phastek has a black powder coated set.

572HP · 03-23-2014, 08:45 PM

Quote:

Originally Posted by mrpyle

Any of you blacked-out the emblems on the fenders? I see Phastek has a black powder coated set.

Green looks so good blacked out. You can pay for some, or you could do it yourself. The hard part is cutting out the adhesive backing to put them back on. If you take the plastic pieces off, you can let them sit in bleach, and this will take off the chrome coating. Or, what if you take a new chrome set and sprayed them with the smoke tint spray?

You could also have emblempros do some custom ones. They do great work.

572HP · 03-23-2014, 08:47 PM

Quote:

Originally Posted by Fortenberry Jam

Anyone going to camaro fest this year?

We are a vendor this year. Shane is going, and Jason is thinking. JT is planning as well.

blake2010ss · 03-23-2014, 09:05 PM

Quote:

Originally Posted by mrpyle

Any of you blacked-out the emblems on the fenders? I see Phastek has a black powder coated set.

Mine are plasti dipped

SlowSS · 03-23-2014, 09:11 PM

Quote:

Originally Posted by blake2010ss

Mine are plasti dipped

Same here! Don't waste your money on buying new ones. Either take them off and paint or leave them on and plasti-dip

blake2010ss · 03-23-2014, 09:36 PM

Jeff... I think your neighbors gave me a E.S.A.D. look while leaving today lol

AG1LE · 03-23-2014, 11:14 PM

I plasti dipped them on my last car, but plan to paint them this time

AG1LE · 03-23-2014, 11:17 PM

Quote:

Originally Posted by 572HP

Green looks so good blacked out. You can pay for some, or you could do it yourself. The hard part is cutting out the adhesive backing to put them back on. If you take the plastic pieces off, you can let them sit in bleach, and this will take off the chrome coating. Or, what if you take a new chrome set and sprayed them with the smoke tint spray?

You could also have emblempros do some custom ones. They do great work.

I bought an OEM set on eBay (~$25), and plan to spray paint them. That way I don't have to mess with the adhesive.

mrpyle · 03-24-2014, 06:32 AM

Quote:

Originally Posted by blake2010ss

Mine are plasti dipped

Sprayed while on the car? Would it be easier to mask it off and spray it, or just spray it and then trim/peel around it? I was also thinking I might use the plasti-dip on the rear panel between the tail lights. My in-law suggested maybe blackout the side mirror housings, but idk about that.

blake2010ss · 03-24-2014, 07:05 AM

Quote:

Originally Posted by mrpyle

Sprayed while on the car? Would it be easier to mask it off and spray it, or just spray it and then trim/peel around it? I was also thinking I might use the plasti-dip on the rear panel between the tail lights. My in-law suggested maybe blackout the side mirror housings, but idk about that.

I sprayed mine off the car. I had purchased the black ones from emblempros but they fell apart somehow. So we had the chrome stripped and plasti dipped them and then reapplied it. I also plasti dip my rear decklid section between the tail lights.

Sent from my XT1080 using Tapatalk

Southern Comfort · 03-24-2014, 08:36 AM

Quote:

Originally Posted by Fortenberry Jam

Anyone going to camaro fest this year?

Any chance you are thinking about FBody in May?

Quote:

Originally Posted by OK2DRUL

Got the Pfadt drop springs, toe rods, and trailing arms installed today with a little help from Jeff and a lot of help from his friend Josh. Looking forward to the sway bars, sub frame, and differential bushings next month!

Love the drop stance!

03-23-2014, 06:21 PM	#16634
OK2DRUL ace5.org (Atlanta Club) Drives: 2010 Black/IOM 2SS LS3 Join Date: Sep 2013 Location: St. Simons Island, GA Posts: 1,011	Got the Pfadt drop springs, toe rods, and trailing arms installed today with a little help from Jeff and a lot of help from his friend Josh. Looking forward to the sway bars, sub frame, and differential bushings next month! Attached Images __________________

03-23-2014, 08:29 PM	#16636
mrpyle Drives: 2011 2LT/RS - Synergy Green Join Date: Mar 2013 Location: Auburn, Ga Posts: 432	Any of you blacked-out the emblems on the fenders? I see Phastek has a black powder coated set. __________________

03-23-2014, 09:36 PM	#16641
blake2010ss Drives: 2010 Camaro 2ss/rs Join Date: Oct 2009 Location: stone mountain, GA Posts: 2,228	Jeff... I think your neighbors gave me a E.S.A.D. look while leaving today lol __________________ 2010 Camaro 2SS/RS LS3 1093/1066 416, AGP 6262, E85, Cam

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does Anyone Use a Club?	PercyJWellingtonIII	5th Gen Camaro SS LS LT General Discussions	51	12-31-2011 08:05 AM
CAJUN CAMARO CLUB/ Meeting to formalize our club	GATORJAK	USA - Southcentral	124	03-20-2011 08:22 PM
In the process of starting a new Camaro Club this year!	Blue Maro Demon	USA - Southeast	0	01-23-2011 11:51 PM
Eastern TN 5th GEN Camaro Club	304hp?	USA - Southeast	0	02-04-2010 03:11 AM
Club Day at Speedworld in January on a Sunday	chellzers	USA - Southwest	0	01-03-2010 04:39 PM

03-23-2014, 06:29 PM	#16635
nitto85 Caffeine Injected Drives: 13 Ram - 05 Widebody 1050rwhp Vette Join Date: Sep 2010 Location: Woodstock, Ga Posts: 1,033	Looks real good OK2DRUL.

03-23-2014, 11:14 PM	#16642
AG1LE Drives: '14 1LE Join Date: Nov 2013 Location: NJ Posts: 2,435	I plasti dipped them on my last car, but plan to paint them this time