Weighed her today!

[joelster]

3564

[Gouki]

That's much lighter than mine, what have you done for weight savings ? Do you have the weight distribution F/R.

50% gas.

LF 1000 1042 RF
LR 920 829 RR
Total 3791 lbs
Cross 1962 lbs
51.75%

[joelster]

I could have looked at the F/R but I was just wondering about the total weight. My car has just about everything you could do without cutting it up. Biggest weight savings were going to Kirkey seats instead of the heavy Recaro's. It has a ton of stuff removed. The wheels/tires are much lighter, etc. I could get it race ready and under 3500 if I wanted to. It probably has 40 extra lbs of fuel in it.

[GeneRoss]

Originally Posted by joelster

I could have looked at the F/R but I was just wondering about the total weight. My car has just about everything you could do without cutting it up. Biggest weight savings were going to Kirkey seats instead of the heavy Recaro's. It has a ton of stuff removed. The wheels/tires are much lighter, etc. I could get it race ready and under 3500 if I wanted to. It probably has 40 extra lbs of fuel in it.

What is your rim/tire set up?

[olblue75]

What wing are you running???

[joelster]

Originally Posted by GeneRoss

What is your rim/tire set up?

Apex SM-10 in 18x11, with Yokohama A052's in 315/30/18

Front wheels:

https://www.apexraceparts.com/shop-b...aro-wheel.html

Rear wheels:

https://www.apexraceparts.com/shop-b...aro-wheel.html

Originally Posted by olblue75

What wing are you running???

It's from a company called Wing-logic, and the upper piece is just a flat piece of aluminum that I mounted. Endplates are custom from 2 flat sheets of carbon fiber. I have an upper wing element on order from 9-lives racing, but from talking to a lot of people, I likely won't see it for 20-30 weeks.

https://wing-logic.com/product/65in-racing-wing/

[SIM GhostrdrZ]

Originally Posted by joelster

Apex SM-10 in 18x11, with Yokohama A052's in 315/30/18

Front wheels:

https://www.apexraceparts.com/shop-b...aro-wheel.html

Rear wheels:

https://www.apexraceparts.com/shop-b...aro-wheel.html






It's from a company called Wing-logic, and the upper piece is just a flat piece of aluminum that I mounted. Endplates are custom from 2 flat sheets of carbon fiber. I have an upper wing element on order from 9-lives racing, but from talking to a lot of people, I likely won't see it for 20-30 weeks.

https://wing-logic.com/product/65in-racing-wing/

I ran across PCI(pro car innovation). Same extruded wing material but looks like they might have in stock selections you can get any length and just make your own mounting setup. Figured I’d pass info along and hope it helps.

[Coz3z3]

Originally Posted by joelster

Apex SM-10 in 18x11, with Yokohama A052's in 315/30/18

Front wheels:

https://www.apexraceparts.com/shop-b...aro-wheel.html

Rear wheels:

https://www.apexraceparts.com/shop-b...aro-wheel.html

https://wing-logic.com/product/65in-racing-wing/

Why didn't you go with 12" wide in the rear? They clear the carbon ceramics or are you on a different brake setup? Do you run a spacer? I couldn't get a clear answer from Apex when I was trying to purchase from them a year or two ago.