Project Cleaning the Clutter in Our Engine Bay - Page 172 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Bluffen · 11-01-2013, 09:57 AM

This thread has been better than the HBO show.. The Wire..

grocerygetter · 11-01-2013, 10:54 AM

did I read this isn't making SEMA?

The Stig · 11-01-2013, 11:24 AM

Quote:

Originally Posted by grocerygetter

did I read this isn't making SEMA?

Correct. G5.R will not be at SEMA :(

LC · 11-01-2013, 11:56 AM

Congratulations MoBros that car is looking sex!

Now seal the garage to prevent dust haha

dibs on the plastic engine!

IOM Black Diamond · 11-01-2013, 12:51 PM

Damn that looks amazing.

PAUL SS · 11-01-2013, 01:47 PM

Outstanding, just outstanding!

vroomapunk · 11-01-2013, 02:47 PM

Did y'all already plan the wiring harness routing situation? Im sure thatll be a task to keep it all as hidden as possible

The Stig · 11-01-2013, 04:01 PM

Quote:

Originally Posted by vroomapunk

Did y'all already plan the wiring harness routing situation? Im sure thatll be a task to keep it all as hidden as possible

They could go the wireless route....

Cali_Camaro_SS · 11-03-2013, 12:31 PM

So here is one of the intake manifolds Nathan was talking about

Will be revealed at Sema

This image has been resized. Click this bar to view the full image. The original image is sized 1024x574.

Testing are new Ls manifold in to the wee hours of the night you guys are the first to see it. We will be unveiling it at Sema so far 488 hp on a bone stock 2012 Camaro engine with all 4 cats factory air box stock exhaust and mufflers

This image has been resized. Click this bar to view the full image. The original image is sized 1024x574.

264HSV · 11-04-2013, 04:46 AM

Nathan, any chance you remember the exact specs for these 90 degree heat shrink boots for the injector connections? There are that many choices I'm sure to mess up even with verniers.
cheers in advance.

tramtwo · 11-04-2013, 07:20 AM

Quote:

Originally Posted by Cali_Camaro_SS

So here is one of the intake manifolds Nathan was talking about

Will be revealed at Sema

This image has been resized. Click this bar to view the full image. The original image is sized 1024x574.

Testing are new Ls manifold in to the wee hours of the night you guys are the first to see it. We will be unveiling it at Sema so far 488 hp on a bone stock 2012 Camaro engine with all 4 cats factory air box stock exhaust and mufflers

This image has been resized. Click this bar to view the full image. The original image is sized 1024x574.

Wow!

krusher · 11-04-2013, 07:46 AM

This is supposed to be cleaning your engine bay, not putting a kitchen sink in your engine bay!

Bluffen · 11-06-2013, 12:16 PM

Quote:

Originally Posted by krusher

This is supposed to be cleaning your engine bay, not putting a kitchen sink in your engine bay!

PAUL SS · 11-06-2013, 07:19 PM

Quote:

Originally Posted by 264HSV

Nathan, any chance you remember the exact specs for these 90 degree heat shrink boots for the injector connections? There are that many choices I'm sure to mess up even with verniers.
cheers in advance.

I found this on one of Nathan's posts, hope it helps.

"I should have a bunch of stuff from Casper Electronics http://www.casperselectronics.com/store2/ tomorrow to finish all the harness work. This is what they look like before heating.."

11-01-2013, 09:57 AM	#2395
Bluffen Drives: 2013 Sea Ray 220 Sundeck Join Date: Apr 2011 Location: Fontana Posts: 1,138	This thread has been better than the HBO show.. The Wire.. __________________ *It's not who you are underneath but what you DO that defines you*

11-01-2013, 10:54 AM	#2396
grocerygetter instigator Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010 Location: 72034 Posts: 3,979 View My Garage	did I read this isn't making SEMA? __________________ -John S.

11-01-2013, 11:56 AM	#2398
LC ou mai gad Drives: SW 2SS x2 Join Date: Feb 2010 Location: MX Posts: 643	Congratulations MoBros that car is looking sex! Now seal the garage to prevent dust haha dibs on the plastic engine! __________________

11-01-2013, 12:51 PM	#2399
IOM Black Diamond HT5 COTW 1/21/13 Drives: 2010 Camaro Inferno 2SS RS 6M Join Date: Apr 2011 Location: Pleasant Hill, Or Posts: 2,486	Damn that looks amazing. __________________

11-01-2013, 01:47 PM	#2400
PAUL SS The Mark of Excellence Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009 Location: Smallest State in the Union Posts: 8,690 View My Garage	Outstanding, just outstanding! __________________ BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein

11-01-2013, 02:47 PM	#2401
vroomapunk [COTW 5/12/14] Drives: 2012 CRT NF Cammed 2SS/RS For Sale Join Date: Oct 2011 Location: NOLA Posts: 6,115 View My Garage	Did y'all already plan the wiring harness routing situation? Im sure thatll be a task to keep it all as hidden as possible __________________

11-03-2013, 12:31 PM	#2403
Cali_Camaro_SS Drives: 2010 Camaro 1SS (BLACK) Join Date: Jan 2010 Location: Cali Posts: 868	So here is one of the intake manifolds Nathan was talking about Will be revealed at Sema This image has been resized. Click this bar to view the full image. The original image is sized 1024x574. Testing are new Ls manifold in to the wee hours of the night you guys are the first to see it. We will be unveiling it at Sema so far 488 hp on a bone stock 2012 Camaro engine with all 4 cats factory air box stock exhaust and mufflers This image has been resized. Click this bar to view the full image. The original image is sized 1024x574. __________________

11-04-2013, 04:46 AM	#2404
264HSV Drives: 2009 HSV WM Grange Join Date: Sep 2013 Location: Melbourne Australia Posts: 41	Nathan, any chance you remember the exact specs for these 90 degree heat shrink boots for the injector connections? There are that many choices I'm sure to mess up even with verniers. cheers in advance.

11-04-2013, 07:46 AM	#2406
krusher Drives: 2010 Camaro SS/RS CGM Join Date: Dec 2011 Location: Oskaloosa, IA Posts: 627	This is supposed to be cleaning your engine bay, not putting a kitchen sink in your engine bay!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roto-Fab \| Engine Covers - S/C \| Fuse Relay Cover \| Radiator Cover \| Billet Oil Cap+	AutoAgenda	Exterior Parts & Accessories	14	02-06-2013 08:43 PM
New Texas Speed & Performance Engine Machining Center!	Trevor @ Texas Speed	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	18	01-16-2013 03:46 PM
Hawk Performance Brake Pads part HB247Z.575 $85.00	Rogan	USA - Florida	2	10-07-2011 12:10 PM
Acronyms?	KEEP RT	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	20	03-11-2011 08:57 PM
Great Read and Info on Oil Weight	Banshee	Mechanical Maintenance: Break-in / Oil & Fluids / Servicing	1	11-23-2009 09:03 PM