06-09-2014, 03:49 PM | #1 |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
New Interior Mods
I thought I would share some of my new interior mods that I completed over the weekend. I have had most of these parts sitting in a pile in my basement, while i was waiting on the MyLink upgrade kit from Gen5DIY. I figured I might as well only tear the interior apart once, or that was the original plan. After some setbacks a few weeks ago, I finally got the MyLink w/ Nav upgrade from Gen5DIY installed and working correctly. When I initially tried to install the MyLink kit, my faceplate wouldn't power on. After working closely with Ofer and doing some testing, we determined that the problem was in my stock wiring/ harness. After a trip to the dealer, they installed a new radio faceplate, wiring and connector under warranty. The second attempt at installing the MyLink was a success and took about an hour! While the console was apart, I installed a second center console that I wrapped in leather from Redline Goods. The red stitching really complements the ZL1 interior nicely. I also had the side panels wrapped in a black leather vinyl, but will soon be switching that out to leather from Redline Goods. I added an e-brake boot from Redline Goods as well, along with a Victory Red painted e-brake handle from RPI Designs.
Finally, I added a Hurst Comp shifter plate, a Carbon Flash Metallic painted shifter bezel and 4-gauge pack, and RGB cupholder lights from Diode Dynamics that I tied into my NightOwl system. All of these new interior mods really changed the look of the interior. The leather wrapped console really softened up the interior and gave it a finished look. It looks stock, which is why I like it so much. Here are some pics: |
06-09-2014, 03:54 PM | #2 |
Drives: '12 2SS/RS 45th vert, '14 2SS/RS Join Date: Nov 2013
Location: Claremore, Oklahoma
Posts: 840
|
Lookin' good.
|
06-09-2014, 07:20 PM | #3 |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
|
06-09-2014, 10:55 PM | #4 |
Belle Isle
|
Wow
... And that cup holder ... I noticed you said the cup holder is RGB, do you get the aqua/blue color to match the stock interior lighting? If so, any pics?
__________________
2014 2SS
Credit to xVengeancex28 Last edited by Cookie Monster; 06-09-2014 at 11:56 PM. |
06-10-2014, 07:30 AM | #5 | |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
Quote:
Yeah, I can set it so that I can match the aqua/ blue stock ABL lighting. I can snap a pic tonight for you. |
|
06-10-2014, 08:42 AM | #6 |
Looks nice. I like the cup holder lighting as well. Shifter not too shabby either.
|
|
06-10-2014, 08:54 AM | #7 |
Drives: 2010 2SS RS M6 Join Date: Mar 2011
Location: Cincinnati area
Posts: 1,522
|
Everything looks great; very good install. One comment on the 4-gauge pack... I have a 2SS/RS so it came with that and I thought it would look bad without them there but after a few years I find myself hardly ever even looking at the gauges since the car always seems to be running fine (knock on wood).
__________________
Traded-in car: K&N Typhoon intake, JBA Shorty headers, Solo mid-pipes/hi-flow cats, GMPP Track Pack axle-back, Vmax ported TB, Billet Custom catch can, billet tensioner pulley, Hines Hex Vents, Z/TA rear spoiler, ProCustom headlight covers, Drake black/riveted quarter window covers, GM satin fuel door, chrome and brushed caps/covers under the hood, EmblemPros underhood bowtie & fuel rail "Camaro" plates, chrome "SS" door kick-panels, chrome trunk latch plate & strut rods, Street Scene lower grille ducts w/LED lights, front bowtie-delete, Yates Performance pedals, 35% tint, etc.
|
06-10-2014, 12:53 PM | #8 | |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
New Interior Mods
Quote:
Yeah, my ZL1 has a 4-gauge pack stock as well, and it's pretty useless while driving. Nothing like having to look down while at full throttle to see the boost reading! I found a great deal on a second one, so I had it painted CFM. I actually have dual Aeroforce gauges mounted on the A-pillar that I can see when I need to and they have tons of optional data to display so you can pick what you want to see. You can see them in the pic below: |
|
06-10-2014, 01:56 PM | #9 |
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
Looks great Matt!
|
06-10-2014, 10:27 PM | #10 | |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
New Interior Mods
Quote:
Here is a pic and a short video: http://youtu.be/TjmG4aoQADc Thanks Seth! |
|
06-10-2014, 10:28 PM | #11 |
|
Looks really good!
__________________
SLP Loud Mouth 1 Exhaust, K&N CAI, RS Headlights, NightOwl V2 halo kit, ZL1 Grille, Custom 2LS Emblems, Green Footwells, GM GFX splitter, Ace Alloy Convex All Matte Black Wheels(20x9 & 20x10.5) wrapped in Toyo Proxe STII(255/45/20 & 295/40/20)
|
06-11-2014, 07:52 PM | #12 |
Belle Isle
|
Thanks a bunch Deke! I just placed an order thru Diode Dynamics for the cup holder, but just in red
__________________
2014 2SS
Credit to xVengeancex28 |
06-12-2014, 12:54 AM | #13 |
Drives: 2011 Camaro 2SS/RS (Black) L99 Join Date: Aug 2010
Location: Pilot Point, Texas
Posts: 2,185
|
Whats the turn knob on the cup holder for, Matt?
|
06-12-2014, 12:55 AM | #14 |
Drives: 2011 Camaro 2SS/RS (Black) L99 Join Date: Aug 2010
Location: Pilot Point, Texas
Posts: 2,185
|
and how close is that shifter to the radio?
|
|
|
|
|