New Tap Shift lever coming up - Page 18 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CFD · 08-11-2011, 03:44 PM

Quote:

Originally Posted by PnCRedJwl2SS

With respect, the fact that you don't like the existing buttons doesn't make your statement accurate. I've been using the existing tapshift buttons for two years, with no problems. With my hands at 9 and 3, as the previous poster said, it is very straightforward to turn the wheel 180 degrees. Your forearms do come close to each other at that point, but at no time do I confuse my right hand with my left. If I want to shift up, I use my right, and if I want to shift down, I use my left. Simple, and not confusing in the least bit.

I do think some of the mods discussed on this forum will make tapshifting even easier, but the existing buttons work just fine.

I guess in my old age I'm not as flexible as some because It is impossible for me to turn the wheel 180 deg and still keep my hands on the buttons but then with the mod on this thread it shouldn't be a concern any longer, it hasn't been for me for quite some time.

subzero05 · 08-15-2011, 09:10 AM

there are 3 spots left on this deal if anybody still wants in?. They are getting assembled now for shipment!

kbui · 08-24-2011, 01:15 PM

Mine arrived today. Too much work right now, but will install it tomorrow.

Beauwulf · 08-24-2011, 02:39 PM

Quote:

Originally Posted by kbui

Mine arrived today. Too much work right now, but will install it tomorrow.

I think you guys are really gonna like this mod! It makes the auto way fun to drive... especially on the track!

NOVAK · 08-24-2011, 02:44 PM

Installed mine last night!

montreal2010yellow · 08-24-2011, 02:46 PM

Any pictures and some comments from new owners?

subzero05 · 08-24-2011, 09:05 PM

looks great!!

camaro2lt · 08-24-2011, 11:21 PM

soo what do you have to do to install these and where can you buy them from?

kbui · 08-25-2011, 07:58 AM

Quote:

Originally Posted by Sparkey

So who made the final list? Really would like a set of these.

Go to page 8 (post #196) of this thread, the phone # is there.

jagan323 · 08-25-2011, 12:37 PM

Really cool to see these installed! They have came a long way. It's nice to see the Hurst engraving too instead of the B&M.

johndawg · 08-26-2011, 10:34 PM

I haven't read through the thread, but has anyone else commented on how close that metal is to the leg? That thing will rip your leg wide open if you get in a wreck...

Maybe it's just the way it looks in the pics?

Beauwulf · 08-27-2011, 05:01 AM

Quote:

Originally Posted by johndawg

I haven't read through the thread, but has anyone else commented on how close that metal is to the leg? That thing will rip your leg wide open if you get in a wreck...

Maybe it's just the way it looks in the pics?

Nah... it's well rounded on the end. It will catch on your shorts sometimes when you get out of the car if the wheel is turned left a little.

There is a second paddle design made from delrin plastic that has a shorter, more rounded lower lobe to choose from.....

datagram940 · 03-08-2018, 08:45 AM

Hi guys!!!

Where Can I find this Paddle Shift Kit?

Thank you :-)

racesloth · 03-09-2018, 04:33 AM

Dead from 2011 - is this a record??

08-24-2011, 01:15 PM	#241
kbui Drives: 85 Vette, 07 Escalade ESV, 03 GMC, Join Date: Nov 2009 Location: Austin, TX Posts: 927 View My Garage	Mine arrived today. Too much work right now, but will install it tomorrow. __________________ ADM Performance installed and tuned: Maggie, Stainless Works Power LTs, ADM race cai, ADM ZL1 scoop Whiteside Customs Super Street 2 Package w/ coilovers BC Racing Coilovers and lowered, Whiteline Bushings & Swaybars MBRP catback exhaust, ZL1 bumper conversion, Drake billet shifter, Hurst paddles, NLP rear spoiler, OEM GFX, Vis Racing hood, ASA GT5 wheels

08-24-2011, 02:46 PM	#244
montreal2010yellow Drives: 2 LT/RS YELLOW, AUTO., VIN NO. 602 Join Date: May 2010 Location: LAVAL (10 min. north of Montreal), CANADA Posts: 3,526 View My Garage	Any pictures Any pictures and some comments from new owners? __________________ T2 Facia, ACS TL1 Hood, ACS Winglets. G5CR CAI. Hotchsic Strut Brace and more...

08-24-2011, 11:21 PM	#246
camaro2lt Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009 Location: Palmyra, PA Posts: 5,675 View My Garage	soo what do you have to do to install these and where can you buy them from? __________________ Email: rdurso1@yahoo.com

08-25-2011, 12:37 PM	#248
jagan323 I have no life Drives: 06' Subaru STI, ex-Camaro V6 LLT Join Date: Apr 2010 Location: Top Gear Test Track Posts: 3,189	Really cool to see these installed! They have came a long way. It's nice to see the Hurst engraving too instead of the B&M. __________________ List of Camaro DIY The Blog

08-26-2011, 10:34 PM	#249
johndawg I'd rather be shooting... Drives: 2010 2SS/RS Black/Black Join Date: Dec 2009 Location: Alpharetta, GA Posts: 1,116 View My Garage	I haven't read through the thread, but has anyone else commented on how close that metal is to the leg? That thing will rip your leg wide open if you get in a wreck... Maybe it's just the way it looks in the pics? __________________ Follow Us on The Official Photographer of the 2010, 2011 & 2012 Camaro5 Fests!!! www.theshuttergroup.com

08-15-2011, 09:10 AM	#240
subzero05 Account Suspended Drives: 2010 tbd Join Date: Mar 2009 Location: california Posts: 647	there are 3 spots left on this deal if anybody still wants in?. They are getting assembled now for shipment!

08-24-2011, 02:44 PM	#243
NOVAK Drives: 2015 ZL1 Join Date: Oct 2010 Location: California the Republic Posts: 521	Installed mine last night!

08-24-2011, 09:05 PM	#245
subzero05 Account Suspended Drives: 2010 tbd Join Date: Mar 2009 Location: california Posts: 647	looks great!!

03-08-2018, 08:45 AM	#251
datagram940 Drives: Camaro 2SS RS Join Date: Oct 2014 Location: :-) Posts: 61	Hi guys!!! Where Can I find this Paddle Shift Kit? Thank you :-) __________________

03-09-2018, 04:33 AM	#252
racesloth Dan Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013 Location: Georgia, USA not the other one Posts: 1,041	Dead from 2011 - is this a record?? __________________ Dan 2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Super Sale on Raptor Shift Lights @ KY SPEED	FRCBobby	Audio / Visual / Electronics/ Gauges / Nav	44	11-25-2011 10:34 AM
Raptor Peformance Dual / Single Mode Shift Lights Now Available At APEX Motorsports!!	Apex Motorsports	Interior Parts & Accessories	144	07-03-2011 09:14 PM
Pic's of Aftermarket Shift Knob on Stock shifter stalk	jammer174	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	3	12-04-2010 08:49 PM
Tap Shift When to Use	NoFatChx	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	2	03-24-2010 09:18 AM