Tuning done--Question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Dplenzig · 09-09-2013, 12:34 PM

My car put down 701hp and 650 torque on a Mustang dyno. The torque is over 600 before 3000 and is steady near 650 all the way to 6600 is this normal? I've seen cars with a lot more torque on here. 14psi boost.

Daren

Drew P · 09-09-2013, 07:43 PM

650 is pretty solid with those mods assuming you are running pump gas.

09-09-2013, 12:34 PM	#1
Dplenzig Drives: 2013 ZL1, 1971 Camaro Join Date: Nov 2012 Location: Colorado Posts: 60	Tuning done--Question My car put down 701hp and 650 torque on a Mustang dyno. The torque is over 600 before 3000 and is steady near 650 all the way to 6600 is this normal? I've seen cars with a lot more torque on here. 14psi boost. Daren

09-09-2013, 07:43 PM	#2
Drew P Drives: Camaro ZL1 Join Date: May 2012 Location: Houston Posts: 233	650 is pretty solid with those mods assuming you are running pump gas. __________________ 2012 A6 Coupe 630RWHP 10.93@125 Mods: ID850 Injectors; D3PE HX, Reservoir & Atmospheric Catch-Can; LPE 2.55 Upper & 9.1 Lower Pulleys w/ ATI Damper; LPE Idler Pulley Relocation Bracket; "Green" Serp. Belt; Cat delete;ADM Exhaust Override; Magnaflow X-Pipe Muffler (in addition to stock mufflers); Cold Air Inductions CAI; 160 thermostat; LS9 Isolator; Port/polish snout and intake runners; LPE GT9 camshaft with dual springs and titanium retainers; Kenne Bell BAP, Install and Engine Tune by Serious Hp; Fab work by D3 Performance Engineering; Trans Tune by Keith; Coming Soon: Flex Fuel Conversion.