You are browsing camaro5 
 |
|
11-25-2019, 01:34 PM
|
#1 |
 |
super charger pulley size combo
I’m new to the forum, i have a 2012 zl1 and looking at different pulley sizes. Currently i’m running a 2.35 upper pulley and stock lower pulley. what do y’all recommend for the lower pulley? i’m trying to get as much power out of the supercharger as i can. or is there another upgrade somone recommends?
here is what i have done to the car: 4” roto fab intake tsp 1 7/8 long tube headers corsa catback cat/resonator delete tsp stage 3 cam tsp pushrods and valve springs KB boost a pump ID 1050x injectors lingenfelter 160 degree thermostat DSX flex fuel kit, e85 sensor Reinforced supercharger brick Lingenfelter High Capacity Intercooler Heat Exchanger supercharger ice tank |
|
|
|
11-25-2019, 10:51 PM
|
#2 |
|
fo'shizZL1
Drives: 2017 ZL1 Join Date: Aug 2017
Location: ATL
Posts: 1,281
|
I'd go with an 8.66 lower, or do 9.17 but also step up to 2.45 or 2.55 if you do a 9.17. You could also step up to a ported blower next or ported heads.
__________________
2017 ZL1 M6 Black | Maggie 2650 // 103TB // Big Gulp
Past Rides- 2014 ZL1 M6 Red Hot | Tons of mods 2004 CTS-V M6 Silver | Many mods 1995 Corvette M6 Torch Red | A few more mods 1992 Camaro M5 White | A few mods |
|
|
|
|
|
|
|
 |
| Tags |
| 700whp, pulley, supercharger, zl1 |
|
|
