02-21-2017, 11:08 AM | #1 |
Drives: 2011 White 2SS Join Date: May 2011
Location: Ohio
Posts: 408
|
SS Brembo Calipers and Rotors
Front and Rear Calipers
Front and rear Brake hoses/clips/bolts Front and rear caliper bolts/pins/retainer Front Pads (I reused the rear pads) Front rotor backing plates. (Swapped to ZL1 calipers and new backing plate was used) The rotors where sprayed down and bagged so they have no rust. Wiped a section so you can see. I think other than rear pads and rear backing plate is all that would be needed to swap onto a V6 car. I have no desire to break up and sell individual parts. Buy them and sell what you don't need. Asking shipped $850 plus PayPal fees. All parts Taken off the car with only 5-6000 miles. Sent from my iPhone using Tapatalk |
02-21-2017, 11:19 AM | #2 |
Drives: 2011 White 2SS Join Date: May 2011
Location: Ohio
Posts: 408
|
I am firm on the price because of the shipping cost.
If someone is local and wants to pick them (Dayton Ohio) I'll take $750 cash. Sent from my iPhone using Tapatalk |
02-21-2017, 02:48 PM | #3 |
Drives: 2011 White 2SS Join Date: May 2011
Location: Ohio
Posts: 408
|
This would be a good opportunity to have another set of calipers to send off for Powdercoating and not have to have any down time.
Sent from my iPhone using Tapatalk |
02-21-2017, 03:18 PM | #4 |
Join Date: May 2016
Posts: 7
|
They look good, might be interested.
Sent from my SAMSUNG-SM-G935A using Tapatalk |
02-21-2017, 08:37 PM | #5 |
Drives: 2011 White 2SS Join Date: May 2011
Location: Ohio
Posts: 408
|
|
02-24-2017, 08:39 AM | #6 |
Drives: 2011 White 2SS Join Date: May 2011
Location: Ohio
Posts: 408
|
.
Sent from my iPhone using Tapatalk |
03-04-2017, 01:02 PM | #7 |
Drives: 2011 White 2SS Join Date: May 2011
Location: Ohio
Posts: 408
|
Still for sale. Boxed and ready to ship.
Sent from my iPhone using Tapatalk |
03-12-2017, 11:53 AM | #8 |
Drives: 2011 White 2SS Join Date: May 2011
Location: Ohio
Posts: 408
|
Bump.
Will trade for a Eaton TrueTrac. You pay shipping on both. Sent from my iPhone using Tapatalk |
03-19-2017, 09:14 PM | #9 |
Drives: 2011 White 2SS Join Date: May 2011
Location: Ohio
Posts: 408
|
Bump.
Sent from my iPhone using Tapatalk |
04-13-2017, 07:56 PM | #10 |
Drives: 2011 White 2SS Join Date: May 2011
Location: Ohio
Posts: 408
|
PM replied. Still for sale.
Sent from my iPhone using Tapatalk |
05-15-2017, 12:21 PM | #11 |
Drives: 2015 2LT RS Join Date: Jun 2016
Location: Ohio
Posts: 2
|
Still have these? Im in Dayton as well, I think you're in SWOCC with me?
|
05-15-2017, 07:21 PM | #12 |
Drives: 2011 White 2SS Join Date: May 2011
Location: Ohio
Posts: 408
|
|
06-17-2017, 09:36 AM | #13 |
Drives: 2011 White 2SS Join Date: May 2011
Location: Ohio
Posts: 408
|
I was asked what else was needed for a swap onto a V6.
Should only need the rear backing plates and rear pads. The old caliper bolts are included but they are TTY bolts so you are supposed to replace them. Some guys don't. Up to you. Sent from my iPhone using Tapatalk |
06-18-2017, 12:23 AM | #14 |
Drives: 2012 Camaro LS Black Join Date: Jun 2017
Location: Aurora, IL
Posts: 96
|
I'm in the market for some. Leaving a comment to come back to!
|
|
|
|
|