11-26-2009, 11:19 PM | #1 |
Drives: RY 2LT/RS Join Date: Jul 2009
Location: Niagara Falls ONT.
Posts: 457
|
Wanting Airraid
Im holding out on a intake right now because I want to see if they come out with anything better but I dont want to wait forever
my question is, is there any other intakes in the making right now or should I just get the airraid
__________________
Airaid Intake And Solo CatBack Solo Highflow Cats |
11-27-2009, 01:12 AM | #2 |
Drives: 2010 Camaro 2SS Join Date: Jun 2009
Location: CA
Posts: 211
|
love my Airaid! Car really came to life after installation. This combined w/ a catback will deliver phenomenal performance!
|
11-27-2009, 01:15 AM | #3 |
Don't Feed the Troll
Drives: 2010 Camaro 2LT/RS & 1999 Corvette Join Date: Jun 2009
Location: Montgomery, TX
Posts: 774
|
I really like my airaid and the improved performance. There are a few threads about this already in this section. If you read them you will find that everyone is happy with their purchase of their airaid, at least that is what I read. I never really saw any bad remarks about them.
__________________
|
11-27-2009, 08:06 AM | #4 |
OCD
Drives: 2014 2SS/RS 1LE Join Date: Oct 2009
Location: Mel's Drive-In
Posts: 503
|
The Airraid is the top choice. Combined with IAT relocate and exhaust the gains should be significant.
|
11-27-2009, 09:14 AM | #5 |
Drives: 1LT; IBM; 6 Spd Manual Join Date: May 2009
Location: Heath, Tx.
Posts: 499
|
Airaid's price is competitive. Waiting for anything else at a lower price, in my opinion, would be a lessor system. The Airaid system is a good value for the quality. As for the system itself, put me on the list of happy customers.
__________________
1LT; Airaid CAI; Flowmaster American Thunder Axelback; Int Floor Lts; RS Spoiler; Radio Controls; Sequential tail lights; Oil Catch Can; VMAX Throttle Body; MACE plenum spacer; Mace manifold insulator[/I] |
11-27-2009, 09:46 AM | #6 | |
Drives: 2016 & 1967 Camaro, 2015 Impala, +1 Join Date: Jul 2009
Location: New York
Posts: 1,165
|
Quote:
I think in a few months there will be at least a few new V6 intakes released ! I am not talking about finding one at a lower price. Did you, or will you do an exhaust mod ? I put the MRT exhaust on first, then the Airaid. I showed 1 to 2 tenths of a sec. gain on my 0-60mph runs with the exhaust. When I added the Airaid I seen no more than 1 hundered of a sec. gain. So if you have an exhaust mod, don't expect any gain from the airaid without a tune. IMO NOTE:......... I read somewhere in a Thread that you will gain X with a Exhaust Mod. alone. OR gain X with a Intake Mod.alone. But you will NOT gain 2X with the 2 Mods. For Example: X= 2 tenths. Sec. on 0-60 runs. So you could only gain 2 tenths & NOT 4 tenths........... That's what happened with mine...... |
|
11-27-2009, 09:48 AM | #7 |
|
I'm thinking about getting the Airaid to.
|
11-27-2009, 10:03 AM | #8 | |
Red Brick of Vengeance!
Drives: 12 Second Brick Join Date: Jun 2009
Location: at my pulpit
Posts: 7,745
|
Quote:
__________________
|
|
11-27-2009, 10:45 AM | #9 | |
Drives: 2010 Camaro Join Date: Jun 2009
Location: Phoenix
Posts: 251
|
Quote:
You can never stack a bunch of mod's and then think you can just stack the performance, it does not work that way. It's about finding a good combination of part's that work well together. Thanks, David |
|
11-27-2009, 10:51 AM | #10 | |
Drives: 2010 Camaro Join Date: Jun 2009
Location: Phoenix
Posts: 251
|
Quote:
The Overall Quality of Components, Fit & Finish, and Performance of the AIRAID are 2nd to None! All AIRAID Intakes are Made in the USA and Feature our Lifetime "No-Hassle" Warranty! All AIRAID Intakes come fully Tuned and Calibrated and does not require any Tuning. Thanks, David |
|
11-27-2009, 11:11 AM | #11 |
Drives: 2010 CGM 2LT / RS, Blk 1SS/RS Join Date: Sep 2009
Location: TEXAS
Posts: 404
|
Love my Airaid. The enhanced growl of the engine by itself is worth it to me..the gains are just a bonus!
Great Job Airaid!! |
11-27-2009, 08:28 PM | #12 |
BOD 5/28/09 #13485
Drives: 2010 Camaro 2LT RS Join Date: Jan 2009
Location: Chesapeake, Virginia
Posts: 913
|
I am thinking if getting the Airaid CAI but I just got my new SOLO exhaust and need to build up some cash first.
__________________
|
11-27-2009, 09:04 PM | #13 |
ordered my AIRAID a few days back, will be here tuesday. Then its onto the exhaust search and order.
__________________
|
|
11-27-2009, 09:28 PM | #14 |
Drives: '10 LT RS A6 & '04 Acura RSX Type S Join Date: Oct 2009
Location: Florida
Posts: 1,529
|
I like my airaid intake though I do have one reservation. The hugh deflector just opposite the MAF/IAT probe just looks restrictive as hell! It reduces the intake inlet diameter by 40% at a guess. I realize there are certain flow characteristics that must be achieved but there has to be a better way than that! Kinda looks like they took the V8 model and "throttled it down" for the V6..... I can see where this would direct airflow over the MAF but the turbulance off that deflector must be horrendous!
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Roto-Fab or Airraid CAI? | UberFlaco | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 39 | 12-07-2009 12:02 PM |
Can I use Airraid CAI with Maggie??? | onechuck | Forced Induction - V8 | 0 | 11-12-2009 01:37 PM |
wanting to buy a suspension kit without lowering my car. | Mohrg Beast | Wheels and Tires Talk Sponsored by The Tire Rack | 8 | 09-10-2009 09:46 PM |
AirRaid CAI | darkknight8425 | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 4 | 07-09-2009 11:39 AM |
What is your first memory of you wanting a Camaro? | ANDRE | 5th Gen Camaro SS LS LT General Discussions | 22 | 07-14-2007 12:17 PM |