Does 1LE Have Speed Governor?

[Hyena]

has anyone tried to install the undertray from the ZL1 onto a 1LE?will it fit?not to jack the thread or anything...but also,what is the diffrence between the SS wheel bearings and the ZL1s'?

[Dznts]

Originally Posted by CamaroSkooter

[SUKXOST]

Originally Posted by unkillsam

That video looks very fake. If you were going 150 miles an hour, I think the background would look a little more blurred out then that. You go under an overpass and it looks like you are doing 70.

+1

[JimE]

I believe the ZL1 hood plays a part as well as the underpan. And as noted, there is no power difference between the SS, so no need to change the limit. Not too mention there is no need to have it removed. I highly doubt anyone posting in this topic about their high speeds or the limiter, have done it legally.

[SSE 4 2SS]

Originally Posted by JimE

I believe the ZL1 hood plays a part as well as the underpan. And as noted, there is no power difference between the SS, so no need to change the limit. Not too mention there is no need to have it removed. I highly doubt anyone posting in this topic about their high speeds or the limiter, have done it legally.

Agreed

The videos have been removed... Review the rules of posting... You may post video from a track or some form of sanctioned racing, but not videos from illegal street driving... there will be no further warnings...

[KTWillys]

All General Motors Cars Produced since 1981 have a top speed limiter set.
Yes even the ZL1 has a speed limiter set.

And there is no dealer that will remove or reset it to a higher limit.
But you can do it with the proper programing device...

After another thread talking about the 1LEs being limited. I pulled up hp tuners and look.

My factory stock 1LE is not limited to 155.

Originally Posted by Camaro_Corvette

Then you better tell everybody in this thread, this thread, this thread, and this thread that they don't need a tune to go faster than 155. Like I said, you're the first I've heard of it. So you have my attention.

[SGDM]

Originally Posted by Hyena

has anyone tried to install the undertray from the ZL1 onto a 1LE?will it fit?not to jack the thread or anything...but also,what is the diffrence between the SS wheel bearings and the ZL1s'?

Yes, we installed one on mine, hooks right up.

[kevinw]

i thought the ZL1 coupe was at 180 and ZL1 vert at 155, along with SS and LT 19 inch wheels, all at 155.

[White_SS/RS]

Originally Posted by SGDM

Yes, we installed one on mine, hooks right up.

Im looking for a zl1 belly pan. where do I get one?

[The Stig]

Originally Posted by White_SS/RS

Im looking for a zl1 belly pan. where do I get one?

Gen5DIY sells them

[White_SS/RS]

Originally Posted by The Stig

Gen5DIY sells them

I just found that, My dealer quoted me $172 with tax.