Nitrous Plate - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Kraken · 03-09-2018, 05:53 AM

Anyone running the nitrous plate system? I have a few questions. Thanks!

Kyle2k · 03-09-2018, 03:47 PM

I was, whats up?

Badbubba · 03-10-2018, 03:27 AM

Which plate?

Kraken · 03-10-2018, 05:16 AM

Quote:

Originally Posted by Badbubba

Which plate?

Nitrous express

Kraken · 03-10-2018, 05:17 AM

Quote:

Originally Posted by Kyle2k

I was, whats up?

Curious about fitment issues. My TB is very close to my pulley. Not sure if it'll clear if I use a plate?

Buschman · 03-10-2018, 08:03 AM

Just replace the tensioner pulley and bracket. Katech makes a nice billet piece, moves the pulley down and toward the fender.

Badbubba · 03-10-2018, 08:12 PM

You flip the tb 180.

03-09-2018, 05:53 AM	#1
Kraken Drives: 2010 Camaro 2SS Join Date: Jul 2015 Location: Olive Branch, MS Posts: 95 View My Garage	Nitrous Plate Anyone running the nitrous plate system? I have a few questions. Thanks!

03-09-2018, 03:47 PM	#2
Kyle2k LVL 50 Troll Stomper Drives: 2010 Camaro Join Date: Feb 2008 Location: Indianapolis Posts: 3,463	I was, whats up? __________________

03-10-2018, 03:27 AM	#3
Badbubba GrINned & JUICEd Drives: 15STI, 10Expy, 10 2SS/RS M6, 47KB1 Join Date: Nov 2009 Location: Pittsburgh, PA Posts: 1,247	Which plate? __________________ GPI SS3 Cam & stuff,N.O. Plate(dedicated fuel tank,progressive,fuel hose upgrade,remote opener,heater,console switches),LNC2000,CTAP,ARH 1 7/8" LTs/gutted cats/X pipe/mufflers,Jet Hot coated LTs,GPI HPT Tune,CAI, Scoop,Rx Catch Can,Gates heater hose relocation, Remote clutch & auto brake res,Metco loop,Momentum Tunnel Brace,TSW Nurb 18",555 & 05,Pfadt trailing arms & toe rods,Autometer WB,Fesler Pillar Pod,LED strips (int),Lloyds floor & trunk mats,LED DRL/front turn & license plate,DRL harness,VLEDs tail lights,Plasticoat Bowties. Ord: Oct 5, 2009 Rec: Nov 19, 2009 13.17@112.6 stock

03-10-2018, 08:03 AM	#6
Buschman Drives: 2018 ZL1 2015 1SS 1LE Join Date: May 2013 Location: North Eastern Michigan Posts: 772	Just replace the tensioner pulley and bracket. Katech makes a nice billet piece, moves the pulley down and toward the fender. __________________ 2018 ZL1 2015 1SS 1LE Stock...ish

03-10-2018, 08:12 PM	#7
Badbubba GrINned & JUICEd Drives: 15STI, 10Expy, 10 2SS/RS M6, 47KB1 Join Date: Nov 2009 Location: Pittsburgh, PA Posts: 1,247	You flip the tb 180. __________________ GPI SS3 Cam & stuff,N.O. Plate(dedicated fuel tank,progressive,fuel hose upgrade,remote opener,heater,console switches),LNC2000,CTAP,ARH 1 7/8" LTs/gutted cats/X pipe/mufflers,Jet Hot coated LTs,GPI HPT Tune,CAI, Scoop,Rx Catch Can,Gates heater hose relocation, Remote clutch & auto brake res,Metco loop,Momentum Tunnel Brace,TSW Nurb 18",555 & 05,Pfadt trailing arms & toe rods,Autometer WB,Fesler Pillar Pod,LED strips (int),Lloyds floor & trunk mats,LED DRL/front turn & license plate,DRL harness,VLEDs tail lights,Plasticoat Bowties. Ord: Oct 5, 2009 Rec: Nov 19, 2009 13.17@112.6 stock