01-06-2010, 10:04 AM | #1 |
Drives: 2010 Camaro 1SS/RS RJT Join Date: Jan 2010
Location: NJ
Posts: 831
|
Flowmaster Mufflers Only
Hey every one, Im gonna be getting a set of Flowmaster Mufflers instead of the whole axle back system, basically to save money and just for the sound rather then performance...Which seires would give me the deepest loudest badd A$$ sound of them all, and which size/inlet/outlet are the proper mufflers to fit on.
Thanks!! |
01-06-2010, 10:58 AM | #2 |
Drives: 2010 Camaro 1SS/RS RJT Join Date: Jan 2010
Location: NJ
Posts: 831
|
10-4, whats the Inlet/Outlet off set on these and the pipe size...id check it out myself but my car is stored in a garage awhile away from me as I drive my mini van during the winter months
|
01-06-2010, 11:32 AM | #3 |
Intermediate Member
Drives: 2010 Camaro SS/RS Join Date: Apr 2009
Location: Elberton, GA
Posts: 78
|
I went to a muffler shop about 2 months ago and tried to do this. He called Flowmaster to see if there was a muffler that would fit and they said no. I asked the muffler shop if they could make one fit and they said no to that also. I ended up buying the Borla Stinger axle back.
__________________
VR 1SS/RS, LS3, Polished Wheels
1100 - 09 Apr 09.............4B00 - 2 July 09 3000 - 28 May 09............4200 - 22 July 09 3400 - 18 Jun 09.............Delivered - 9 Aug 09 TPW - 29 Jun 09 Last edited by 87irocz; 01-06-2010 at 11:34 AM. Reason: spelling |
01-06-2010, 11:34 AM | #4 |
Drives: V45 Join Date: Feb 2007
Location: Southern California
Posts: 1,270
|
40 series,
maybe super 44 they have sound clips on their website so you can get an idea of the differences |
01-06-2010, 11:57 AM | #5 |
Drives: 2010 Camaro 1SS/RS RJT Join Date: Jan 2010
Location: NJ
Posts: 831
|
Nice, well thats no good if they dont have any that fit
|
01-06-2010, 12:25 PM | #6 | |
Drives: RSSS Join Date: Dec 2009
Location: DFW
Posts: 2,492
|
Quote:
|
|
01-06-2010, 12:39 PM | #7 | |
Voice Of The Voiceless
|
Quote:
ZulaKilla, have you asked your local shop about being able to do the work?
__________________
|
|
01-06-2010, 12:43 PM | #8 |
I have Flowmaster...
I had Flowmaster put on my car. I think they are something kind of standard, and I believe they were called 2 chamber or something. It definitely sounded better than it did from the factory, and they didn't say anything about having to "make" them work, they just put them on. I went back and had the two resonators removed and had plain pipe put in their place to give it a bit more sound. I would still like it a little louder, but will probably just leave it the way it is. And before you say anything about me not knowing exactly what was put on, I am a female, and just told them I wanted Flows put on...
__________________
Ordered 10-13-08 2SS/RS M6 BLK/GRY
VIN #2386 Delivered 6-11-09 - Woo Hoo!!! Hey Houston locals-------- Join the H-Town Camaro Club www.H-TownCamaroClub.com |
|
01-06-2010, 12:49 PM | #9 |
Drives: 2010 SVT Raptor/ 70 Chevelle SS 396 Join Date: Dec 2009
Location: Albuquerque NM
Posts: 569
|
i put the 40 series on my 2ss rs m6, evan took the resonators off,
not very loud, should have gone with 44 series. |
01-06-2010, 12:52 PM | #10 |
|
Use the flowmaster mufflers that come with the american thunder system for the 2010 Camaro's.
|
01-06-2010, 12:54 PM | #11 |
Drives: 2013 ZL1 Rally Yellow Join Date: May 2009
Location: Knightdale, NC
Posts: 347
|
I had 40's on my car also. They sounded great. I deleted resonators also. They do fit but are very tight. I would go with Super 44's if I were you. I have heard good things about them as well.
Bryan |
01-06-2010, 02:52 PM | #12 |
Drives: 2010 2 SS RS IMP.BL.MET. GRND.EFCT. Join Date: Dec 2009
Location: Gansevoort, NY
Posts: 14
|
FLOWMASTERS
I came accross a link somewhere on thi site that showed a vid.of a guy installing a set of flowmaster replacement "mufflers only" on a 2010.
I didn,t get the p/n but all he did was cut the pipe like 10" before the stock muff. with a sawsall and slid them out then slid the new f/m in place. They come w/hangers & fit gnd.af cars. Really slick. I WILL find the p/n because this is what I am going with |
01-06-2010, 03:02 PM | #13 |
Drives: 2010 Camaro 1SS/RS RJT Join Date: Jan 2010
Location: NJ
Posts: 831
|
I sent Flowmaster an e-mail, will see how long it takes to reply back!
|
01-06-2010, 03:07 PM | #14 |
Serious Sleeper
Drives: 2010 CGM 2SS/RS M6 Join Date: Nov 2008
Location: Lexington,SC
Posts: 3,129
|
__________________
***************************************
Drive-by Fact of Life: After Monday and Tuesday even the calendar reads... W T F *************************************** |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Flowmaster 40 Series Delta Flow mufflers on a V6 | kga10734 | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 32 | 02-11-2016 11:31 AM |
Flowmaster Mufflers | alexdc | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 51 | 10-05-2010 05:15 PM |
Flowmaster American Thunder Exhaust Kit from PHASTEK | Sean@Phastek | V8 Bolt-Ons & Tunes | 20 | 06-09-2010 12:34 PM |
flowmaster mufflers 40 series | Rags | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 14 | 10-03-2009 11:27 AM |