05-13-2020, 01:12 PM | #1 |
Drives: 2013 Iom SS/1LE Join Date: Aug 2013
Location: Minot ND
Posts: 43
|
ISO 4L80 driveshaft
Guys I am looking for a 4l80 driveshaft to a stock rear. Need one ASAP. Need to get the car up and going.
|
05-13-2020, 09:16 PM | #2 |
Drives: 2014 SS 2010 SS 93 Camaro z28 Join Date: Apr 2017
Location: Ohio
Posts: 254
|
Can I give you some advice from someone who just went through this? DSS is gonna be 6 weeks I went to a local shop and had a steel one made in 2 days good luck
|
05-14-2020, 11:49 AM | #3 |
Drives: 2013 Iom SS/1LE Join Date: Aug 2013
Location: Minot ND
Posts: 43
|
That what I looks like , do you happen to know the measurements?
|
05-14-2020, 04:26 PM | #4 |
Drives: 2014 SS 2010 SS 93 Camaro z28 Join Date: Apr 2017
Location: Ohio
Posts: 254
|
Mine is 48” even but it’s to a ZL1 diff. you’ll need the adapter for the diff yoke And a spicer adapter for the rear and of course a front yoke gforce was the cheapest on the aluminum adapter plate (99.00) I think but i had to machine it cause the zL1 takes bigger bolts the spicer flange is 32 bucks I think and I payed 280 for the shaft/u joints I had the front slip yoke off a 3/4 ton van had about 450 in the whole deal had it in 4 days I believe if you need any more info feel free to hit me back Tommy
|
|
|
|
|