C.A.I. installed with pic!!! - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Sales @ CAI Inc · 03-12-2013, 10:13 AM

Quote:

Originally Posted by Jebario

I did not have the sensor issue others had. Install was easy thanks to the step by step instructions. Took all of 20 minutes. Used a blow dryer for the heat shrink part, worked well.
Here's pics:

Great to hear, thanks for choosing Cold Air Inductions Inc.! Make sure to "Like" us on Facebook and submit a photo of your car(s) for our vehicle of the month contest!!

the barber · 03-12-2013, 09:16 PM

So after waiting all day for my CAI intake to arrive it did! And sure enough I bet it was the last delivery 5:52 pm! Had the OEM intake removed since 2pm(that's why I had taped off the throttle body to keep debris out) install was super easy also! Car definitely has some GO now!!

the barber · 03-12-2013, 09:35 PM

Had no lid issues I had put the lid on and tightened up and noticed there was about a half inch gap from front of the lid to the rubber seal pushed down on whole airbox and went into place right up against the seal but all n all came together very peasy and nice throttle response, thanks to Juiced Motorsports for great customer service and CAI Inc for a great product!!

SSGUNNER · 03-13-2013, 12:59 AM

Quote:

Originally Posted by the barber

So after waiting all day for my CAI intake to arrive it did! And sure enough I bet it was the last delivery 5:52 pm! Had the OEM intake removed since 2pm(that's why I had taped off the throttle body to keep debris out) install was super easy also! Car definitely has some GO now!!

Awesome. Looks good.

SSGUNNER · 03-13-2013, 01:02 AM

Lol i was comparing all the pics of the other members who posted their pics and geez do i have a dusty engine compartment

the barber · 03-13-2013, 01:12 AM

Signs of a car being driven! Only have 2700 on mine.. nothing a couple microfibers can't take care of lol

Sales @ CAI Inc · 03-13-2013, 07:48 AM

Quote:

Originally Posted by the barber

So after waiting all day for my CAI intake to arrive it did! And sure enough I bet it was the last delivery 5:52 pm! Had the OEM intake removed since 2pm(that's why I had taped off the throttle body to keep debris out) install was super easy also! Car definitely has some GO now!!

It looks great, thanks for choosing CAI Inc.!

BTW, I am sure you took it off after installation but in the picture I noticed the Warranty Registration reminder sticker is still on the badge, make sure to peel that off. Also be sure to register your product!

the barber · 03-13-2013, 11:11 AM

I did I thought it was just a sticker til I peeled it off and.notcied there was a good looking badge underneath!

Sales @ CAI Inc · 03-13-2013, 03:58 PM

Quote:

Originally Posted by the barber

I did I thought it was just a sticker til I peeled it off and.notcied there was a good looking badge underneath!

Thats to funny. The badge looks a lot better doesn't it!

the barber · 03-13-2013, 05:26 PM

Way better! Got some slowtime at work and decided to add a 20% removable tint to it to c how it would look, thoughts or comments?

Avenging Orange · 03-13-2013, 08:01 PM

Great product. Had one on my '04 GTO when they were'nt really popular and extremely hard to get. But, I loved it so much, I modded it to fit the 90mm intake on the '06 Goat. Looks Awsome!

Sales @ CAI Inc · 03-14-2013, 07:20 AM

Quote:

Originally Posted by Avenging Orange

Great product. Had one on my '04 GTO when they were'nt really popular and extremely hard to get. But, I loved it so much, I modded it to fit the 90mm intake on the '06 Goat. Looks Awsome!

Thats awesome man, nice to hear!! The GTO was one of the first systems we designed, and is still one of our most popular! In fact, I just had a guy call and ask about one yesterday! I think you Camaro needs one of our CAI's

We've come a long way since those days, and now our products are a little more accessible

Del's12SS · 03-14-2013, 08:12 AM

Can I ask a newbie question???
Do you have to unscrew the lid to add washer fluid?

SSGUNNER · 03-14-2013, 08:35 AM

Quote:

Originally Posted by Del's12SS

Can I ask a newbie question???
Do you have to unscrew the lid to add washer fluid?

03-12-2013, 09:16 PM	#16
the barber Drives: 13' Sw 2ss Ls3 Join Date: Dec 2012 Location: porterville ca Posts: 543	So after waiting all day for my CAI intake to arrive it did! And sure enough I bet it was the last delivery 5:52 pm! Had the OEM intake removed since 2pm(that's why I had taped off the throttle body to keep debris out) install was super easy also! Car definitely has some GO now!! Attached Images

03-13-2013, 01:02 AM	#19
SSGUNNER Chu no guat a hasa is? Drives: 14 Jeep G Cherokee Overland HEMI Join Date: Jun 2011 Location: Some where in So Cal Posts: 4,273	Lol i was comparing all the pics of the other members who posted their pics and geez do i have a dusty engine compartment __________________ 11 2SS/RSL99No Longer Stock (Sold) 6/19/14:AAC Plasma DRL's \| Plug n play harness \| Elite CC \| Tint: 35% & 5% \| LED Dome light \| Show-N-Go Plate Holder \| Flowmaster AT \| C.A.I. Intake \| VMAX CNC Spiral Ported TB \| Husky Splash Guards

03-13-2013, 05:26 PM	#24
the barber Drives: 13' Sw 2ss Ls3 Join Date: Dec 2012 Location: porterville ca Posts: 543	Way better! Got some slowtime at work and decided to add a 20% removable tint to it to c how it would look, thoughts or comments? Attached Images

03-13-2013, 08:01 PM	#25
Avenging Orange Drives: 2010 Inferno Orange 2SS/RS Join Date: Apr 2010 Location: Clermont, IN Posts: 3,297	Great product. Had one on my '04 GTO when they were'nt really popular and extremely hard to get. But, I loved it so much, I modded it to fit the 90mm intake on the '06 Goat. Looks Awsome! __________________ 2010 Inferno Orange 2SS/RS M6 Black Leather, Sun Roof, OBX Headers, Borla touring axle back, Cold Air Inductions CAI , non synthetic fluids, BMR total bushing upgrade/1" lowering springs, DSE 32mm rear sway bar. GM fe4 shocks/struts/LCA's, AAM 3.91 diff, Vertini RFS1.8 20x9 +30. Conti ExtremeContact Sport 275/35/20. sjm autoprod ABL dash kit. Mike Norris tuned 413/419. Avenging Orange: 43 years of not buying into the Hype........and damn proud of it!! https://youtu.be/9JD9it6SmB8 https://youtu.be/xmelTlEzI34 KICKING CANCERS ASS SINCE 2015!!

03-12-2013, 09:35 PM	#17
the barber Drives: 13' Sw 2ss Ls3 Join Date: Dec 2012 Location: porterville ca Posts: 543	Had no lid issues I had put the lid on and tightened up and noticed there was about a half inch gap from front of the lid to the rubber seal pushed down on whole airbox and went into place right up against the seal but all n all came together very peasy and nice throttle response, thanks to Juiced Motorsports for great customer service and CAI Inc for a great product!!

03-13-2013, 01:12 AM	#20
the barber Drives: 13' Sw 2ss Ls3 Join Date: Dec 2012 Location: porterville ca Posts: 543	Signs of a car being driven! Only have 2700 on mine.. nothing a couple microfibers can't take care of lol

03-13-2013, 11:11 AM	#22
the barber Drives: 13' Sw 2ss Ls3 Join Date: Dec 2012 Location: porterville ca Posts: 543	I did I thought it was just a sticker til I peeled it off and.notcied there was a good looking badge underneath!

03-14-2013, 08:12 AM	#27
Del's12SS Drives: 2012 Camaro SS/RS Convertible Join Date: Feb 2013 Location: Wyoming, MI Posts: 566 View My Garage	Can I ask a newbie question??? Do you have to unscrew the lid to add washer fluid?