Manual transmission removal the easy way - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

FASTFATBOY · 09-14-2023, 05:41 PM

Code is for the LF mag ride sensor, I have one on order(one of the last ones on earth it appears)

Will update when I get it put on.

ZMEnow · 09-14-2023, 08:01 PM

Quote:

Originally Posted by FASTFATBOY

Code is for the LF mag ride sensor, I have one on order(one of the last ones on earth it appears)

Will update when I get it put on.

Parts for this car are toast.. Thanks Mary..

FASTFATBOY · 09-17-2023, 11:33 AM

Quote:

Originally Posted by ZMEnow

Parts for this car are toast.. Thanks Mary..

Car ID showed one, I have yet to get a shipping confirmation(bought on Thursday) so I may be SOL.

There are some used ones on EBAY and maybe I get get one from one of the guys who have went to coil overs.

FASTFATBOY · 09-18-2023, 11:24 AM

The one from CARiD should be here today, let ya know if it fixes it.

I would recommend either taking the nuts off the tops of the struts and or popping the little arms off the lower control arms.

FASTFATBOY · 09-18-2023, 05:59 PM

LF mag ride sensor fixed the code, she ret ta go

FASTFATBOY · 12-03-2023, 03:23 PM

A heads up for the peeps who drop the cradle, I found my radiator out of it's upper holders today.

I would take them out when you drop the cradle as the upper radiator hose I think pulls the radiator towards the rear and they are dropped out of the holders because you dropped the cradle.

If you dropped the cradle to do a clutch I would check the upper radiator holders and make sure they are still on the radiator.

09-14-2023, 05:41 PM	#43
FASTFATBOY Drives: 2013 ZL1 Join Date: Nov 2018 Location: Mobile Al Posts: 302	Code is for the LF mag ride sensor, I have one on order(one of the last ones on earth it appears) Will update when I get it put on. __________________ 2013 ZL1 M6, 2.4 pulley and a few bolt ons. 590 wheel and 11.70@122 on a hard tire.

09-18-2023, 11:24 AM	#46
FASTFATBOY Drives: 2013 ZL1 Join Date: Nov 2018 Location: Mobile Al Posts: 302	The one from CARiD should be here today, let ya know if it fixes it. I would recommend either taking the nuts off the tops of the struts and or popping the little arms off the lower control arms. __________________ 2013 ZL1 M6, 2.4 pulley and a few bolt ons. 590 wheel and 11.70@122 on a hard tire.

09-18-2023, 05:59 PM	#47
FASTFATBOY Drives: 2013 ZL1 Join Date: Nov 2018 Location: Mobile Al Posts: 302	LF mag ride sensor fixed the code, she ret ta go __________________ 2013 ZL1 M6, 2.4 pulley and a few bolt ons. 590 wheel and 11.70@122 on a hard tire.

12-03-2023, 03:23 PM	#48
FASTFATBOY Drives: 2013 ZL1 Join Date: Nov 2018 Location: Mobile Al Posts: 302	A heads up for the peeps who drop the cradle, I found my radiator out of it's upper holders today. I would take them out when you drop the cradle as the upper radiator hose I think pulls the radiator towards the rear and they are dropped out of the holders because you dropped the cradle. If you dropped the cradle to do a clutch I would check the upper radiator holders and make sure they are still on the radiator. __________________ 2013 ZL1 M6, 2.4 pulley and a few bolt ons. 590 wheel and 11.70@122 on a hard tire.