Ordered Trailblazer SS Emblems, Ideas on Attaching to Heritage Grille? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ZakBradshaw · 12-30-2015, 12:08 PM

I just ordered a GM Heritage grille and a pair of the Trailblazer SS emblems and the red overlays to install on my SS. I have seen several people running these emblems in the center of their Heritage grilles, but no pics or explanations of how they are held in place. I have a couple ideas of my own, but wanted to see what you guys are doing first. Also, what method did you use to heat up the emblem to bend it?

Thanks!

ctk1 · 12-31-2015, 11:47 AM

I put the trailblazer SS emblems on my car using the SLP landing pad, but my car has the standard grill. I also heated it and put a slight bend in it. I would think that you could possible cut a piece of plexiglass/lexan to the shape of the emblem, run 2 screws through the front of the lexan. Then put some small washers and nuts on the backside of the grill to hold it in place. Then just stick the emblem to the lexan.

ZakBradshaw · 01-04-2016, 03:55 PM

Thank you for the reply. Yeah, I was thinking about bending it and then JB welding a couple pieces of all thread to the back of the emblem and making a plate to sandwich it around the grille.

12-30-2015, 12:08 PM	#1
ZakBradshaw Drives: 2010 Camaro 2SS/RS Silver/Black Join Date: Oct 2015 Location: Fort Worth Posts: 34	Ordered Trailblazer SS Emblems, Ideas on Attaching to Heritage Grille? I just ordered a GM Heritage grille and a pair of the Trailblazer SS emblems and the red overlays to install on my SS. I have seen several people running these emblems in the center of their Heritage grilles, but no pics or explanations of how they are held in place. I have a couple ideas of my own, but wanted to see what you guys are doing first. Also, what method did you use to heat up the emblem to bend it? Thanks! __________________ 2010 Camaro 2SS/RS Silver w/Black Racing Stripes, Automatic, K&N CAI, Pypes Pype Bomb Muffler Delete, Resonator X-Pipe Delete 1981 Corvette Silver, Automatic, Edelbrock EPS Intake, Barry Grant Speed Demon Carb, Stainless Side Pipes

12-31-2015, 11:47 AM	#2
ctk1 Camarofanatic Drives: 1969 SS, 1998 RS, 2010 VR 2SS/RS Join Date: Sep 2008 Location: Gallitzin PA Posts: 1,433	I put the trailblazer SS emblems on my car using the SLP landing pad, but my car has the standard grill. I also heated it and put a slight bend in it. I would think that you could possible cut a piece of plexiglass/lexan to the shape of the emblem, run 2 screws through the front of the lexan. Then put some small washers and nuts on the backside of the grill to hold it in place. Then just stick the emblem to the lexan. __________________ 2010 Victory Red R6P 2SS w/RS package. Gloss black Rallys, 6 speed manual, SLP Loudmouth I exhaust, LS7 style blackout panel, SS emblems front and rear, Custom 69 inspired headlight covers, Vararam no tune, Hurst Short Throw, and MTI Racing rear spoiler, SLP Front Splitter, ZL1 Side Skirts

01-04-2016, 03:55 PM	#3
ZakBradshaw Drives: 2010 Camaro 2SS/RS Silver/Black Join Date: Oct 2015 Location: Fort Worth Posts: 34	Thank you for the reply. Yeah, I was thinking about bending it and then JB welding a couple pieces of all thread to the back of the emblem and making a plate to sandwich it around the grille. __________________ 2010 Camaro 2SS/RS Silver w/Black Racing Stripes, Automatic, K&N CAI, Pypes Pype Bomb Muffler Delete, Resonator X-Pipe Delete 1981 Corvette Silver, Automatic, Edelbrock EPS Intake, Barry Grant Speed Demon Carb, Stainless Side Pipes