Iowa Members Get In Here! - Page 473 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

NitroBeagle · 02-12-2014, 11:54 AM

What brand headers ? Thats going to sound great.

BenningJ · 02-13-2014, 11:12 AM

I purchased a set of 1-7/8" Dynatech headers from Ted (White1LE).

white1LE · 02-13-2014, 08:57 PM

Jason, you don't have them on yet??? Lol. I finally got mine a couple weeks ago and just sent them out to Swaintech to get coated. Decided to haul my car to Lingenfelter on the 22nd to have their LPE700+HP package installed. Headers will be shipped there from Swaintech.
When the weather breaks we should get some people together and meet up at Pizza Ranch again.

its a syn · 02-14-2014, 10:51 AM

Snow Sucks A**!!!

BenningJ · 02-15-2014, 11:58 AM

Nope. I don't have them on yet. It's been too damn cold in Cedar Falls to install them. Soon enough though. I can't wait to put them on.

IowaGuy · 02-18-2014, 04:43 PM

Well, wife's car is getting old. She decided what so wants for her next car....- a camaro!
I'm making her wait until 6th gen is out but we will be back in the club at some point. Wouldn't mind seeing Jason and the others at some nearby meet this spring, if my volt doesn't cramp your style too much.

Edit: just took her car in today for oil change and got quoted 500 dollars to replace a leaking oil pan gasket. Not sure this thing is gona make it to gen 6

NitroBeagle · 02-20-2014, 09:32 AM

Is ICE still alive or has it melted ?

pwrmanpaul66 · 02-20-2014, 11:39 AM

Its falling from the skies here ! And heading you way soon thunder lightning and pea sized hail ! Good luck all ! And as far as the real question yes the group is still here just not to much action going on blame it on the weather ! LOL !

NitroBeagle · 02-20-2014, 12:53 PM

Just wondering about the group. Hope to see this club get together once winter breaks.

IowaGuy · 02-20-2014, 08:12 PM

Drive safe everyone, it's nasty out!

rberns · 02-20-2014, 09:58 PM

Its very windy out right now. looking forward to this coming spring/summer/fall.

Obsessive Camaro Disorder · 02-22-2014, 10:56 AM

EDIT:Here is a link the the Iowa Region SCCA http://www.iowaregionscca.org/events.html

Des Moines Valley Region SCCA has posted their AutoX schedule. First event is scheduled in a few weeks.
Here is the link http://dmvrscca.com

NQS Performance has announced their autoX schedule on Facebook, but have not updated their website (www.nqsperformance.com) yet.
June 7, July 12, August 9, and September 20 @ Iowa International Raceway aka Marshalltown Go-Kart Track. NQS puts on an excellent event, I encourage you all to come. The track time per $ and organization is second to none. The course is great too! FREE to watch!!

PLEASE POST ANY OTHER ORGANIZATIONS/GROUPS AUTOX SCHEDULE IN IOWA. I know there are a lot more groups in Iowa that host events like the Corvette club, the Porsche club, the BMW club, etc.

Steve_RS_Camaro · 02-22-2014, 12:30 PM

Nationwide at Datona "DRIVERS START YOUR ENGINE" the "GREEN FLAG" has dropped so lets get ready to pull our cars out soon!

BenningJ · 02-24-2014, 10:58 AM

No front plate ticket. Only took them 5.5 months to catch me on it. Haha. The cop also tried to say my exhaust was too loud and would need to be replaced. I told him I would gladly pull the GM part numbers off of the mufflers and let him look them up himself. So we did and he let it go. I guess I will be ordering a new bracket now from JacFab.

02-12-2014, 11:54 AM	#6609
NitroBeagle Member NHRA GoodGuys ICE Drives: 2011 CGM 2SS/RS Join Date: May 2011 Location: Cedar Rapids Iowa Posts: 363	What brand headers ? Thats going to sound great. __________________

02-13-2014, 11:12 AM	#6610
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	I purchased a set of 1-7/8" Dynatech headers from Ted (White1LE). __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

02-13-2014, 08:57 PM	#6611
white1LE Drives: 2013 Camaro ZL1 Join Date: Nov 2012 Location: Dubuque, IA Posts: 880	Jason, you don't have them on yet??? Lol. I finally got mine a couple weeks ago and just sent them out to Swaintech to get coated. Decided to haul my car to Lingenfelter on the 22nd to have their LPE700+HP package installed. Headers will be shipped there from Swaintech. When the weather breaks we should get some people together and meet up at Pizza Ranch again. __________________ 13 ZL1 A6 LSX 427 with AGP Twin Turbos, E85 and Flex Fuel. Built and tuned by ADM Performance 1000rwhp

02-14-2014, 10:51 AM	#6612
its a syn B.O.D. 02/16/10 Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010 Location: Albia,Iowa Posts: 3,959 View My Garage	Snow Sucks A**!!! __________________

02-15-2014, 11:58 AM	#6613
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	Nope. I don't have them on yet. It's been too damn cold in Cedar Falls to install them. Soon enough though. I can't wait to put them on. __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

02-18-2014, 04:43 PM	#6614
IowaGuy Drives: 2013 Cyber Gray Metallic Chevy Volt Join Date: Dec 2011 Location: Lives on camaro5 Posts: 353 View My Garage	Well, wife's car is getting old. She decided what so wants for her next car....- a camaro! I'm making her wait until 6th gen is out but we will be back in the club at some point. Wouldn't mind seeing Jason and the others at some nearby meet this spring, if my volt doesn't cramp your style too much. Edit: just took her car in today for oil change and got quoted 500 dollars to replace a leaking oil pan gasket. Not sure this thing is gona make it to gen 6 __________________ I have come to realize that my wife's a mod addict. Instead of a camaro she has the house, and instead of camaro5 she has HGTV. Last edited by IowaGuy; 02-19-2014 at 05:42 PM.

02-20-2014, 09:32 AM	#6615
NitroBeagle Member NHRA GoodGuys ICE Drives: 2011 CGM 2SS/RS Join Date: May 2011 Location: Cedar Rapids Iowa Posts: 363	Is ICE still alive or has it melted ? __________________

02-20-2014, 11:39 AM	#6616
pwrmanpaul66 Drives: 2016 2/SS 6 spd Dual Mode Join Date: Jun 2011 Location: DSM, IA Posts: 996 View My Garage	Its falling from the skies here ! And heading you way soon thunder lightning and pea sized hail ! Good luck all ! And as far as the real question yes the group is still here just not to much action going on blame it on the weather ! LOL ! __________________

02-20-2014, 12:53 PM	#6617
NitroBeagle Member NHRA GoodGuys ICE Drives: 2011 CGM 2SS/RS Join Date: May 2011 Location: Cedar Rapids Iowa Posts: 363	Just wondering about the group. Hope to see this club get together once winter breaks. __________________

02-20-2014, 08:12 PM	#6618
IowaGuy Drives: 2013 Cyber Gray Metallic Chevy Volt Join Date: Dec 2011 Location: Lives on camaro5 Posts: 353 View My Garage	Drive safe everyone, it's nasty out! __________________ I have come to realize that my wife's a mod addict. Instead of a camaro she has the house, and instead of camaro5 she has HGTV.

02-20-2014, 09:58 PM	#6619
rberns Drives: 2011 Camaro 2SS/RS Join Date: Apr 2011 Location: US Posts: 3,291 View My Garage	Its very windy out right now. looking forward to this coming spring/summer/fall. __________________ 2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan, Holley fuel rail, Proform valve covers, relocated coil packs

02-22-2014, 10:56 AM	#6620
Obsessive Camaro Disorder Drives: 69 Camaro and 92 RS Join Date: Feb 2013 Location: Iowa Posts: 180	EDIT:Here is a link the the Iowa Region SCCA http://www.iowaregionscca.org/events.html Des Moines Valley Region SCCA has posted their AutoX schedule. First event is scheduled in a few weeks. Here is the link http://dmvrscca.com NQS Performance has announced their autoX schedule on Facebook, but have not updated their website (www.nqsperformance.com) yet. June 7, July 12, August 9, and September 20 @ Iowa International Raceway aka Marshalltown Go-Kart Track. NQS puts on an excellent event, I encourage you all to come. The track time per $ and organization is second to none. The course is great too! FREE to watch!! PLEASE POST ANY OTHER ORGANIZATIONS/GROUPS AUTOX SCHEDULE IN IOWA. I know there are a lot more groups in Iowa that host events like the Corvette club, the Porsche club, the BMW club, etc. __________________ There are 3 ways to do any project. Good, fast, and cheap. You can only choose two. If it's done good and fast, it isn't going to be cheap. If it's done good and cheap, it isn't going to be done fast. If it's done cheap and fast, it isn't going to be good. Last edited by Obsessive Camaro Disorder; 03-03-2014 at 10:30 PM.

02-22-2014, 12:30 PM	#6621
Steve_RS_Camaro Ain't Scared Racing Drives: 2015 Summit White Camaro Z28 Join Date: Jun 2012 Location: Ankeny, Iowa Posts: 172 View My Garage	Nationwide at Datona "DRIVERS START YOUR ENGINE" the "GREEN FLAG" has dropped so lets get ready to pull our cars out soon!

02-24-2014, 10:58 AM	#6622
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	No front plate ticket. Only took them 5.5 months to catch me on it. Haha. The cop also tried to say my exhaust was too loud and would need to be replaced. I told him I would gladly pull the GM part numbers off of the mufflers and let him look them up himself. So we did and he let it go. I guess I will be ordering a new bracket now from JacFab. __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Properautocare Coupon Sale for Camaro5 Members	Angelo@Autopia	Wash/Wax/Detailing and Cosmetic Maintenance Parts	2	12-11-2009 09:38 AM
STS Turbo - Exclusive Offer for Camaro 5 Members - Ends Oct 10th!!!	ZZcamaro	Forced Induction	64	10-19-2009 12:16 PM
Messages to more than 5 members & Social Groups	heinzd01	Site Related Announcements / Suggestions / Feedback / Questions	5	09-16-2009 08:22 AM