DIY Fuel Pump Cut Access Panel? Level: Easy - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MIDNIGHTANGEL · 05-19-2018, 12:31 PM

Put the ZL1 Fuel pump in the traditional way (Drop rear) P.I.T.A. and took 3-4hrs. When I had access to my buddies tools and hydraulic jack... My poor friend was Murdered the other day. at the age of 22 in Kankakee... Distraught and stuck I had to do something..

Car didn't start so I was stuck in the garage with not much funds. Had the original still..

I switched it this time after cutting an Access panel. Everyone else used a Dremel tool... Too dangerous. So try this budget builders:
What you Need:

*Wiss Snips
*Pliers
*& a Netflix account with all the spare time you saved.

When You remove the rubber cover you have 2 points to start from.

Going to Seal it with a diamond plate metal block with caulk.

frankwjr · 05-19-2018, 03:51 PM

DAMN bro...sry 'bout ur friend!

and tks for the pic's....gonna do this too sum day...

peace

btw - did you use the special tool to remove the lock ring?

MIDNIGHTANGEL · 05-20-2018, 01:35 PM

Thanks man.. No ring tool/leaks/vapors

05-19-2018, 12:31 PM	#1
MIDNIGHTANGEL Back4Revenge Drives: BLACK CAMARO Join Date: Jan 2009 Location: CHICAGO Posts: 451	DIY Fuel Pump Cut Access Panel? Level: Easy Put the ZL1 Fuel pump in the traditional way (Drop rear) P.I.T.A. and took 3-4hrs. When I had access to my buddies tools and hydraulic jack... My poor friend was Murdered the other day. at the age of 22 in Kankakee... Distraught and stuck I had to do something.. Car didn't start so I was stuck in the garage with not much funds. Had the original still.. I switched it this time after cutting an Access panel. Everyone else used a Dremel tool... Too dangerous. So try this budget builders: What you Need: Wiss Snips Pliers & a Netflix account with all the spare time you saved. When You remove the rubber cover you have 2 points to start from. Going to Seal it with a diamond plate metal block with caulk. __________________ I chose my 6 with Pride..* Last edited by MIDNIGHTANGEL; 05-19-2018 at 01:01 PM.

05-19-2018, 03:51 PM	#2
frankwjr Drives: 2010 SS 2SS M6 Join Date: Aug 2016 Location: Smithsburg, Md. Posts: 2,446	DAMN bro...sry 'bout ur friend! and tks for the pic's....gonna do this too sum day... peace btw - did you use the special tool to remove the lock ring? __________________ 2010 SS 2SS M6 - Tune by RDP dynoSteve!(Woot) - Daily Driver - *150K!* - All work by me...

05-20-2018, 01:35 PM	#3
MIDNIGHTANGEL Back4Revenge Drives: BLACK CAMARO Join Date: Jan 2009 Location: CHICAGO Posts: 451	Thanks man.. No ring tool/leaks/vapors __________________ *I chose my 6 with Pride..*