11-29-2011, 05:27 PM | #15 |
Drives: Z28/700HP, CTSV/850HP, Viper/725HP Join Date: May 2009
Location: Addison, TX
Posts: 128
|
Hi Frank,
Good job, put a blower friendly cam and some FAST 85s and you will make upper 600s at the tires. We have done 15+ of these with the same combo and they are all still alive. J.P. |
11-29-2011, 05:44 PM | #16 |
Drives: 2010 CamaroSS Join Date: Aug 2009
Location: Burlington NC
Posts: 217
|
Damn J.P. now you're tempting me. I was going to be satisfied with 600rwhp, especially since it's set up for road racing more so than drag racing..and I think 590+rwtq will be handful enough coming out of the turns. So far I haven't had any high IAT temps that i keep reading about, but I also haven't put it on a road course yet...so that's still a concern for me. Plus I don't have especially good luck and with that being said...I would be the one to have catastrophic failure with a stock bottom end and 700rwhp.
__________________
Frank 10 Camaro Magnacharged- 585rwhp/585rwtq, full exhaust, Pedders Justice/ZL1 sway, Stoptech brakes and 21" 3 Pc. Forgeline wheels 99 Corvette- 502rwhp/460rwtq-402 N/A, 6pis/4pis brakes...fun track car |
11-29-2011, 05:45 PM | #17 |
Drives: 2010 CamaroSS Join Date: Aug 2009
Location: Burlington NC
Posts: 217
|
We prefer to use the NGK TR-6 plugs on these cars and I haven't pulled a plug to see what was installed prior to my purchase.
__________________
Frank 10 Camaro Magnacharged- 585rwhp/585rwtq, full exhaust, Pedders Justice/ZL1 sway, Stoptech brakes and 21" 3 Pc. Forgeline wheels 99 Corvette- 502rwhp/460rwtq-402 N/A, 6pis/4pis brakes...fun track car |
11-30-2011, 09:37 AM | #18 | |
Drives: Z28/700HP, CTSV/850HP, Viper/725HP Join Date: May 2009
Location: Addison, TX
Posts: 128
|
Quote:
We are starting a 1200 HP+ car right now that should be a hoot. Good Luck with the car and take care. J.P. |
|
11-30-2011, 09:46 AM | #19 |
Drives: 2010 CamaroSS Join Date: Aug 2009
Location: Burlington NC
Posts: 217
|
1200+...that's what I'm talkin about...we built a 08 Charger Super Bee that we have the current world record with 9.28@152 (4300lbs) that makes around 1250HP...definitely a handful to drive, especially on street tires
__________________
Frank 10 Camaro Magnacharged- 585rwhp/585rwtq, full exhaust, Pedders Justice/ZL1 sway, Stoptech brakes and 21" 3 Pc. Forgeline wheels 99 Corvette- 502rwhp/460rwtq-402 N/A, 6pis/4pis brakes...fun track car |
11-30-2011, 09:51 AM | #20 | |
Drives: Z28/700HP, CTSV/850HP, Viper/725HP Join Date: May 2009
Location: Addison, TX
Posts: 128
|
Quote:
Very Nice! Love to see those 1 off projects like that Have a link to any runs of that Bad Boy? J.P. |
|
11-30-2011, 10:24 AM | #21 | ||
Drives: 2010 CamaroSS Join Date: Aug 2009
Location: Burlington NC
Posts: 217
|
Quote:
__________________
Frank 10 Camaro Magnacharged- 585rwhp/585rwtq, full exhaust, Pedders Justice/ZL1 sway, Stoptech brakes and 21" 3 Pc. Forgeline wheels 99 Corvette- 502rwhp/460rwtq-402 N/A, 6pis/4pis brakes...fun track car |
||
11-30-2011, 10:31 AM | #22 |
Drives: Z28/700HP, CTSV/850HP, Viper/725HP Join Date: May 2009
Location: Addison, TX
Posts: 128
|
Would love to take the stripes, wing and hood off that car and go street racing.
You could probably pay for the car pretty quickly with the winnings |
11-30-2011, 10:34 AM | #23 |
Drives: 2010 CamaroSS Join Date: Aug 2009
Location: Burlington NC
Posts: 217
|
Haha...yea, no one ever expects it to run like it does...thats for sure, especially when they see the full interior, AC, sub woofer in the trunk.
__________________
Frank 10 Camaro Magnacharged- 585rwhp/585rwtq, full exhaust, Pedders Justice/ZL1 sway, Stoptech brakes and 21" 3 Pc. Forgeline wheels 99 Corvette- 502rwhp/460rwtq-402 N/A, 6pis/4pis brakes...fun track car |
11-30-2011, 04:07 PM | #24 |
Most hated in NM....
Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011
Location: New Mexico
Posts: 2,904
|
Cant wait to get my Maggie in.... so much potential.
__________________
|
11-30-2011, 05:06 PM | #25 |
|
I need a Supercharger now
__________________
Jannetty Racing JRE Street Package
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Maggie 2300 installation almost done, two questions | Fiftydriver | Forced Induction - V8 | 15 | 10-14-2011 12:58 PM |
Maggie 2300 for LS3 with ROTO-FAB and Fessler Pod & Gauges | RabanzZ28 | Forced Induction | 20 | 08-21-2011 03:03 PM |
My photo album of Maggie photos. | Nine Ball | Forced Induction - V8 | 19 | 08-26-2010 02:09 PM |
Maggie experts...5 lbs boost on a 3.6 pulley? | Luvpilot | Forced Induction - V8 | 2 | 06-04-2010 07:16 AM |
Please recommend a CAI for Maggie 2300 | ffrcobra_65 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 24 | 11-16-2009 09:55 PM |