07-14-2020, 05:47 AM | #1 |
Drives: 2013 Hot Wheels Edition Join Date: Aug 2014
Location: Marcy, NY
Posts: 98
|
WTB, low mileage ZLE OEM front brake pads
Mine were taken off by the previous owner at 600mi, and non dusting pads were installed (on fronts only). I want the stock pads. If you have a low mileage set your willing to part with let me know. If not, where is the best place to buy a new set of fronts? Thanks in advance!
|
07-14-2020, 06:48 AM | #2 |
Drives: '19 ZLE, S54 E36M3 Join Date: Feb 2018
Location: North Augusta, SC
Posts: 227
|
I just got a set from Summit for $222 shipped.
|
07-14-2020, 07:26 AM | #3 |
Drives: 2013 Hot Wheels Edition Join Date: Aug 2014
Location: Marcy, NY
Posts: 98
|
Thanks m3bs, I just saw that. I'll wait a day or two, then pull the trigger with Summit.
|
07-14-2020, 07:59 AM | #4 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Check out the C7 portion of the CorvetteForum should be able to pick up a nice set for less than that. I’ve bought several complete sets for all 4 corners for less than 100 bucks.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-14-2020, 08:26 AM | #5 |
Drives: 2013 Hot Wheels Edition Join Date: Aug 2014
Location: Marcy, NY
Posts: 98
|
Thanks Olblue75. I didn't know the C7 used the same pads. Do they need to be off a ZO6 or ZR1, or any C7 vette?
|
07-14-2020, 08:44 PM | #6 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
GS/Z06 non Z07, make sure they are iron rotor cars.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-14-2020, 08:46 PM | #7 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
https://www.corvetteforum.com/forums...rake-pads.html
These are what your looking for they have semi high mileage I’d offer a 100 shipped.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-15-2020, 06:20 AM | #8 |
Drives: 2013 Hot Wheels Edition Join Date: Aug 2014
Location: Marcy, NY
Posts: 98
|
Thanks again Olblue75! Those have more wear on them than I'd like, but I get it now.
|
07-15-2020, 07:41 AM | #9 |
Drives: 2013 C6Z06 Join Date: Nov 2016
Location: PA
Posts: 1,577
|
You are telling him to get the wrong brake pads for the ZL1/ZLE. The GS/Z06 use the same rotors as the SS1LE. The pads fit yes, but they are smaller than the correct ZL1 pads and a different shape with less contact area.
|
07-15-2020, 08:23 PM | #10 |
Drives: 2013 Hot Wheels Edition Join Date: Aug 2014
Location: Marcy, NY
Posts: 98
|
Thanks everyone, I just order new ones from Summit!
|
|
|
Post Reply
|
|
|