03-17-2016, 03:20 PM | #1 |
The right way to install Air Scoop and Remote Washer Bottle
Fascia Removal, Air Scoop, and Remote Washer Bottle Install - Pulled the Fascia and Headlamps off as I will install Dual Color Halo's at some point. Wanted to knock this install off before finishing up Front Suspension, it's pretty straight forward and easier with the level of disassembly I have. Got a clean cut on the Shroud using tin snips. Elected to mount the Filler Bottle to the outside of the CAI, and run the fill hose through the CAI so I don't have to take off the Glass Top. This is a clean installation, and will definitely increase some air flow to the hungry Blower.
|
|
03-17-2016, 07:35 PM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Whose WW bottle is it???
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
03-18-2016, 06:28 AM | #3 |
It is PHASTEK-CAMARO-12216, consisting of Windshield Washer Tank Replacement (#122115) and the Intake Scoop (#83115)
|
|
|
|
|
|