You are browsing camaro5 
 |
|
04-16-2021, 08:15 PM
|
#1 |
 Drives: 2010 2LT/RS Join Date: Sep 2017
Location: British Columbia
Posts: 39
|
caliper bleeder valve screw part #?
Hi all,
Is the v6 caliper bleeder valve the same as the V8s? One of mine is rusted and corroded to heck and I need to replace it, and I was thinking of replacing them with speed bleeder valves but I could only find brembo related threads. I think I found the OEM GM Part No.: 88935776 but information seems a bit scarce about aftermarket options. Any input would be greatly appreciated thanks! Edit: Also sorry I just realized this was like engine/powertrain stuff for the LLT, I misread and thought it was just LLT threads period, apologies. Last edited by IlikeMyCamaro; 04-17-2021 at 04:55 PM. Reason: midunderstood the thread category |
|
|
|
04-16-2021, 09:39 PM
|
#2 |
  
Drives: 2014 1SS/1LE Join Date: Nov 2015
Location: Louisville, KY
Posts: 828
|
Most bleeder valves are one of a couple of different sizes. I went with speed bleeders on mine.
Sent from my Pixel 5 using Tapatalk
__________________
830 WHP 700 WTQ, Whipple 2.9 @ 13lbs Boost, Flex Fuel Tune by Blevins Tuning, LSA SBE, 3.5 GripTec, ATI LS3 Damper, AFR 260cc Mongoose, ARP Studs, Yella Terra Ultralites, Johnson 2110R, BTR PDS Stage 3, Melling 10355, Improved Racing Baffle, ID1050X, DSX Triple Fuel Pump, RotoFab CAI, NW 103mm TB, Stainless Works 1-7/8" LTH to 3" Speed Eng w/ X-pipe to NPP, Powermaster 9509 XS, Detroit Speed Motor Mounts, MGW, Monster LT1-S, ZL1 Calipers, DBA Rotors & Pads, Bilstein B6 Struts & Shocks, BMR 1.25" Drop Springs & Adj Rear Bar, Pegasus Solid Bushings, Z/28 Wheels, other misc parts.
|
|
|
|
|
|
|
|
 |
|
|
