12-04-2011, 07:42 PM | #1 |
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
Will Vette knob fit stock Camaro???
Does anyone know if the stock knob for the C6 Corvette will work on the Camaro? I know they are both press fit and I love the size and feel of the C6 knob. Shift pattern is the same so as long as shaft size is the same? It should work right?
Here is the knob I would like to get for my SS w/IO interior. http://www.gscreationsllc.com/produc...roducts_id/594 |
12-04-2011, 09:51 PM | #2 |
LS3 Black Widow
Drives: 2012 45th 2SS LS3 and 1968 Mustang Join Date: Nov 2011
Location: Madison, GA
Posts: 4,557
|
Don't take my word for it but I believe it will. While searching for pictures of each shifter (to visually compare the OEM shifters), I found this link:
http://www.chevyhardcore.com/feature...hrow-shifters/ "For all of you fifth-gen Camaro and C5/C6 owners looking to swap out your shifters for something that aids in rowing the gears just a tad bit quicker,......" However, it could just be describing the company who makes individual shifters for both model cars. With a little more research (or comparison really) I'm sure you could confirm if this is possible or not.
__________________
|
12-04-2011, 10:09 PM | #3 |
LS3 Black Widow
Drives: 2012 45th 2SS LS3 and 1968 Mustang Join Date: Nov 2011
Location: Madison, GA
Posts: 4,557
|
Here's a good comparison of the shifters:
Factory C6: Factory Camaro (hurst, but uses same knob): Looks very similar to me. You should be fine. Hope all this helps!
__________________
|
12-04-2011, 10:11 PM | #4 |
Official Lounge BAMF
|
this is basically the same knob, just a different logo
|
12-05-2011, 06:27 AM | #5 |
Drives: 2010 2SS/RS M6 Black/Black Join Date: Apr 2009
Location: Pittsburgh, PA
Posts: 1,281
|
Is that a stock vette knob? I've been wanting to do this for awhile just didn't want to buy the knob without knowing for sure.
__________________
Pittsburgh Automotive Photography Black on Black 2SS/RS w/ white stripes Dynomax 3" Bullet Catback, CAI Cold Air Intake |
12-05-2011, 09:51 AM | #6 |
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
Thanks Hightower and Helmincamaro!
I have an email into GS when I hear back from them I will update this thread. I had the C6 knob for my Z06 and loved the way it felt. |
12-05-2011, 11:52 AM | #7 |
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
I was told it will not work.
Edit: GS Creations is gonna look into a way to make this work! Last edited by SSTG; 12-05-2011 at 12:37 PM. |
12-05-2011, 12:29 PM | #8 |
Drives: 2010 IOM 2SS/RS Join Date: Oct 2008
Location: NJ
Posts: 633
|
If you want to look into the Pontiac G8 knob, that's what I've done. You can look for my thread on it, however, I should tell you it's not meant to fit and it doesn't push on all the way. But, I've had it for about 6 months and it's not loose or otherwise un-snug in any way.
|
12-05-2011, 12:37 PM | #9 |
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
Thanks Outatime.
|
12-05-2011, 05:31 PM | #10 |
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
I had someone PM me about this today wanting to possibly get one if GS Creations makes it.
Anybody else interested in this? Our am I in the minority? They are gonna look into getting one produced if there is enough interest. Please state your thoughts. Here is a pic. |
12-06-2011, 10:09 AM | #11 |
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
Bump.
|
12-06-2011, 10:12 AM | #12 |
Drives: 2010 IOM 2SS/RS Join Date: Oct 2008
Location: NJ
Posts: 633
|
I guess it's just me that's interested, lol. Would they still do it?
|
12-06-2011, 10:24 AM | #13 |
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
There is more. This board is slooow to catch on at times,lol.
I'm sure they will make it. Corvette owners that know this knob will tell you the fit and feel are incredible! They really are nice. Worst come to worst they already have them for after market shifters. I'll just have to get me an MGW. Hehe. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
First Ever DOUBLE DIN (monitor / screen) NO LONGER AVAILABLE**** | Hess RS | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 992 | 06-12-2013 11:13 PM |
PEDDERS SUCCESSFULLY FITS 305s ON ALL 4 CORNERS! | Info@PeddersUSA.com | Suspension / Brakes / Chassis | 467 | 06-11-2013 09:45 PM |
The DEFINITIVE EXPLANATION OF CAMARO SUSPENSION, ISSUES, AND UPGRADES | Info@PeddersUSA.com | Suspension / Brakes / Chassis | 106 | 10-19-2009 06:08 PM |
Ambient lighting (ABL) - the FINAL update = LIMITED TO DOOR PANELS | CamaroScotty | 5th Gen Camaro SS LS LT General Discussions | 338 | 04-15-2009 05:33 PM |
Answeres to questions I have stumbled on | dieseldave24v | 5th Gen Camaro SS LS LT General Discussions | 13 | 02-23-2009 06:56 PM |