04-02-2013, 07:35 PM | #1 |
Annihilator
Drives: 2012 45th ERL-427 F1X Join Date: Aug 2011
Location: KY
Posts: 334
|
FS : (REAR) Brembo Rear Calipers / Pads / Slotted-Dimpled Rotors
SOLD
Guys - I am sorry for my late response here - I am better than that.... But these Brembo's sold and I got tied up in life so did not update here - I apologize. I still have the rear Slotted / Dimpled Rotors and would sell for $150 + shipping. I know they may be a tad heavy so will work with you on that cost if interested. Guys - I will post pics but here is the net - net of what I have, and looking for reasonable best offers..... - Rear SS Brembo (CALPIERS) / (LINES) / (PADS - pads are new less than 500 miles)... Brembo's were painted red and likely you would want to paint again or I am happy to do them before shipping.... your call. - A set of slotted / dimpled SS rotors.... REARS ONLY I can split also... I did a full rear conversion and looking for decent best offers here.... If you are interested and need pics to tell the story I am happy to respond quickly to any / all PM's. I had this gear and am thinning all out so just wanted to make these items available. Thx
__________________
ERL M3 Superdeck 427 Forged, Dragon Slayer Crank, Black Label Heads : ProCharger F1X Cog - Holley HighRam : Jakes4L80e CircleD - DSS 9" 1400 axles/shaft, BMR Suspension : Extreme Innovations 15 : Squash, Bosch 127lb FI : ALKY Twin Meth
Last edited by CamaroSS45; 05-07-2013 at 10:14 AM. |
04-02-2013, 07:43 PM | #2 |
Drives: 2014 ZL1 Join Date: Sep 2012
Location: West Virginia
Posts: 591
|
pm sent
|
04-02-2013, 07:47 PM | #3 |
Annihilator
Drives: 2012 45th ERL-427 F1X Join Date: Aug 2011
Location: KY
Posts: 334
|
PM Responded to
__________________
ERL M3 Superdeck 427 Forged, Dragon Slayer Crank, Black Label Heads : ProCharger F1X Cog - Holley HighRam : Jakes4L80e CircleD - DSS 9" 1400 axles/shaft, BMR Suspension : Extreme Innovations 15 : Squash, Bosch 127lb FI : ALKY Twin Meth
|
04-05-2013, 04:09 AM | #4 |
|
pics and price of rotors?
|
04-05-2013, 04:51 PM | #5 |
Track > 1/4 Mile
|
Would like to see pics. I have the SS front brake system but the V6 rear. I just bought new pads & rotors for both the front and rear. Just installed the front. However I may hold off on the rears if we can work something out. I assume your rotors aren't R1 Concepts? I'd like my rotors to match.
__________________
|
04-05-2013, 10:24 PM | #6 | |
Annihilator
Drives: 2012 45th ERL-427 F1X Join Date: Aug 2011
Location: KY
Posts: 334
|
Quote:
Thanks for all of the interest and sorry for my delay. Massive rebuild and just getting my non-sold items either shipped or pics / posted here. Thx
__________________
ERL M3 Superdeck 427 Forged, Dragon Slayer Crank, Black Label Heads : ProCharger F1X Cog - Holley HighRam : Jakes4L80e CircleD - DSS 9" 1400 axles/shaft, BMR Suspension : Extreme Innovations 15 : Squash, Bosch 127lb FI : ALKY Twin Meth
|
|
04-08-2013, 10:17 PM | #7 |
one car wolfpack
Drives: 2010 Camaro V6 Join Date: Nov 2010
Location: Illinois
Posts: 1,226
|
Great deal for what he is asking, I was gonna buy but ran into trouble with my money lol
|
04-16-2013, 08:47 PM | #8 |
Virologist in the making
Drives: 2010 VR SS/RS LS3 Join Date: Aug 2009
Location: El Paso TX
Posts: 2,865
|
How much for the pads?
__________________
Victory Red 1SS/RS Ordered - 8/4/09 & Joined Camaro5.com family
6000, Delivered to the customer - 12/21/09 |
05-07-2013, 10:14 AM | #9 |
Annihilator
Drives: 2012 45th ERL-427 F1X Join Date: Aug 2011
Location: KY
Posts: 334
|
SOLD
Guys - I am sorry for my late response here - I am better than that.... But these Brembo's sold and I got tied up in life so did not update here - I apologize. I still have the rear Slotted / Dimpled Rotors and would sell for $150 + shipping. I know they may be a tad heavy so will work with you on that cost if interested.
__________________
ERL M3 Superdeck 427 Forged, Dragon Slayer Crank, Black Label Heads : ProCharger F1X Cog - Holley HighRam : Jakes4L80e CircleD - DSS 9" 1400 axles/shaft, BMR Suspension : Extreme Innovations 15 : Squash, Bosch 127lb FI : ALKY Twin Meth
|
05-19-2013, 10:13 PM | #10 |
Drives: vroom Join Date: Dec 2012
Location: FL
Posts: 34
|
pics?
|
05-20-2013, 05:48 PM | #11 |
Drives: ETMC built 700+hp Twin Turbo LS3 Join Date: Apr 2010
Location: Killeen, TX
Posts: 682
|
Do you still have the rotors.
|
|
|
|
|