Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
JDP Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Dragstrip and Launch Techniques Discussion


Reply
 
Thread Tools
Old 03-09-2018, 06:38 PM   #1
PlatinumIce
WILD CANADIAN HEARTBEAT
 
PlatinumIce's Avatar
 
Drives: 2014 2SS 1LE RS, Recaro's, Sun,Nav
Join Date: Sep 2014
Location: Camrose, Alberta
Posts: 446
27.5” front skinny, 29” rear . Any issues down the track

Any body these size tires on the 1/4 mile track. Any issues with the diameter sizes. Want to know before I order some tires.
__________________
690/633 91Octane Street Tune=749/670 VP109 Race Tune TVS2300 Heartbeat SC,ADM Dual Fuel Pumps/ Module, BRM lowered 1", performance rotors, hawks pads, SS Braided lines, GT-14cam, 78mm pulley, AR LT Headers, Cat Deletes, Borla S catback, tinted, 1/LE emblems, 65lb Injectors, Elite catch can,dual valve springs, titanium retainers, super conductor wires and insulators, Robo Fab CAI, Oversize intercooler reservoir, Oracle ghost side markers, Black out Bowties & SS,ZL1 splash guards, Michelin PSS. Built and tuned by Davenport Motorsports (WILD1LE)
PlatinumIce is offline   Reply With Quote
Old 03-09-2018, 06:58 PM   #2
PlatinumIce
WILD CANADIAN HEARTBEAT
 
PlatinumIce's Avatar
 
Drives: 2014 2SS 1LE RS, Recaro's, Sun,Nav
Join Date: Sep 2014
Location: Camrose, Alberta
Posts: 446
According to website skinny is 27,8” and rear is 28.8” so 3.48% diameter difference?
__________________
690/633 91Octane Street Tune=749/670 VP109 Race Tune TVS2300 Heartbeat SC,ADM Dual Fuel Pumps/ Module, BRM lowered 1", performance rotors, hawks pads, SS Braided lines, GT-14cam, 78mm pulley, AR LT Headers, Cat Deletes, Borla S catback, tinted, 1/LE emblems, 65lb Injectors, Elite catch can,dual valve springs, titanium retainers, super conductor wires and insulators, Robo Fab CAI, Oversize intercooler reservoir, Oracle ghost side markers, Black out Bowties & SS,ZL1 splash guards, Michelin PSS. Built and tuned by Davenport Motorsports (WILD1LE)
PlatinumIce is offline   Reply With Quote
Old 03-10-2018, 01:30 PM   #3
robrocketanski
 
robrocketanski's Avatar
 
Drives: ZL1 Convertible Auto
Join Date: Apr 2015
Location: Ferndale, Michigan
Posts: 309
I have mainly seen people say no more than half an inch difference otherwise it sets ABS but I don't know the limits
__________________
LS3 intake and throttle body, Huron Speed Products twin turbo with 6265 oil less turbos, and 3" header back, JRE smooth cam, ID1300, Fore dual 450lph pumps with MSD voltage booster, A6, 325/45/17 M&H Racemaster
robrocketanski is offline   Reply With Quote
Old 03-10-2018, 02:04 PM   #4
PlatinumIce
WILD CANADIAN HEARTBEAT
 
PlatinumIce's Avatar
 
Drives: 2014 2SS 1LE RS, Recaro's, Sun,Nav
Join Date: Sep 2014
Location: Camrose, Alberta
Posts: 446
I am 3% different on my street tires and zero issues.
__________________
690/633 91Octane Street Tune=749/670 VP109 Race Tune TVS2300 Heartbeat SC,ADM Dual Fuel Pumps/ Module, BRM lowered 1", performance rotors, hawks pads, SS Braided lines, GT-14cam, 78mm pulley, AR LT Headers, Cat Deletes, Borla S catback, tinted, 1/LE emblems, 65lb Injectors, Elite catch can,dual valve springs, titanium retainers, super conductor wires and insulators, Robo Fab CAI, Oversize intercooler reservoir, Oracle ghost side markers, Black out Bowties & SS,ZL1 splash guards, Michelin PSS. Built and tuned by Davenport Motorsports (WILD1LE)
PlatinumIce is offline   Reply With Quote
Old 03-11-2018, 09:10 PM   #5
KGoddard
 
KGoddard's Avatar
 
Drives: 2013 Camaro 2SS/RS
Join Date: Jun 2015
Location: NOVA
Posts: 320
I'm running 27" in the front and 28" in the back and the computer was not a fan. Had to pull the fuses.

Sent from my Pixel using Tapatalk
__________________
12.3 @113MPH - Full Bolt-Ons w/ Nitto 555r on 18" wheel
KGoddard is offline   Reply With Quote
Old 03-11-2018, 09:26 PM   #6
PlatinumIce
WILD CANADIAN HEARTBEAT
 
PlatinumIce's Avatar
 
Drives: 2014 2SS 1LE RS, Recaro's, Sun,Nav
Join Date: Sep 2014
Location: Camrose, Alberta
Posts: 446
Quote:
Originally Posted by KGoddard View Post
I'm running 27" in the front and 28" in the back and the computer was not a fan. Had to pull the fuses.

Sent from my Pixel using Tapatalk

Any issues racing down the track with fuses pulled?
__________________
690/633 91Octane Street Tune=749/670 VP109 Race Tune TVS2300 Heartbeat SC,ADM Dual Fuel Pumps/ Module, BRM lowered 1", performance rotors, hawks pads, SS Braided lines, GT-14cam, 78mm pulley, AR LT Headers, Cat Deletes, Borla S catback, tinted, 1/LE emblems, 65lb Injectors, Elite catch can,dual valve springs, titanium retainers, super conductor wires and insulators, Robo Fab CAI, Oversize intercooler reservoir, Oracle ghost side markers, Black out Bowties & SS,ZL1 splash guards, Michelin PSS. Built and tuned by Davenport Motorsports (WILD1LE)
PlatinumIce is offline   Reply With Quote
Old 03-12-2018, 05:24 AM   #7
KGoddard
 
KGoddard's Avatar
 
Drives: 2013 Camaro 2SS/RS
Join Date: Jun 2015
Location: NOVA
Posts: 320
Quote:
Originally Posted by PlatinumIce View Post
Any issues racing down the track with fuses pulled?
It just turns off traction control and stability. You Just won't have abs, braking wasn't much different at all.

Sent from my Pixel using Tapatalk
__________________
12.3 @113MPH - Full Bolt-Ons w/ Nitto 555r on 18" wheel
KGoddard is offline   Reply With Quote
Old 03-13-2018, 06:47 AM   #8
Motorboy8769
 
Drives: 2015 2ss
Join Date: Jun 2015
Location: Wooster ohio
Posts: 535
I pulled fuses on mine spun just a hair on the launch and it knocked the rev limiter down to 5000 I was waiting for my shift light at 6200.... put them back and problem solved. I would prefer to have them pulled so I don’t have to disable traction control plus I liked the steering better. Idk how to fix that problem though
Motorboy8769 is offline   Reply With Quote
Old 03-13-2018, 11:36 AM   #9
WoodBoss
"Old School"
 
WoodBoss's Avatar
 
Drives: 2010 2SS L99
Join Date: Apr 2015
Location: Sherrills Ford, NC
Posts: 1,224
When I pulled fuses I could no longer do a burnout. Best to match tire sizes and not create new issues.
__________________
Back In The Saddle - Earley 2010 2SS IBM A6 #10244 Built - Roto-Fab CAI, Muffler/CAT Delete, 17" Mickey Thompson ET DRs, RDP Tune, ZL1 Fuel Pump,
BW Stage II Ported TB, Speed Engineering 1-7/8" Longtubes, ZEX Nitrous 125HP Shot, Lingenfelter 160* Stat, NGK TR6IX Spark Plugs & Elite Catch Can.
TCI Line Lock, JRE Trans Dipstick, BMR Trailing Arms & Toe Rods, Amsoil Signature Series 5W-30 - 11.76 sec @ 117.3 - 1.61 sec 60' - 1/4 mile pass
Check Out My Youtube Channel For 5th Gen Camaro Drag Racing & How To Mods https://www.youtube.com/channel/UCyG...GR9gDm6PO-27rg
WoodBoss is offline   Reply With Quote
Old 03-13-2018, 12:22 PM   #10
KGoddard
 
KGoddard's Avatar
 
Drives: 2013 Camaro 2SS/RS
Join Date: Jun 2015
Location: NOVA
Posts: 320
Quote:
Originally Posted by Motorboy8769 View Post
I pulled fuses on mine spun just a hair on the launch and it knocked the rev limiter down to 5000 I was waiting for my shift light at 6200.... put them back and problem solved. I would prefer to have them pulled so I don’t have to disable traction control plus I liked the steering better. Idk how to fix that problem though
I haven't experienced anything like that. Shift light came on for me at the usual 6200 and she kept moving.

Sent from my Pixel using Tapatalk
__________________
12.3 @113MPH - Full Bolt-Ons w/ Nitto 555r on 18" wheel
KGoddard is offline   Reply With Quote
Old 03-13-2018, 02:00 PM   #11
shibbs
Captain Gingerbeard
 
shibbs's Avatar
 
Drives: 2012 IOM RS/SS 6MT
Join Date: Feb 2013
Location: West Twin Cities, MN
Posts: 2,272
I think the biggest difference people go is 3%. 285/35/20 and 315/35/20. You might be okay with your selections. Might. You a gambler?
__________________
Custom ordered 2012 6MT RS/SS on 11/25/2011. Picked up 01/31/12.
BMR 1" lowering springs, trailing arms and toe-links, Prothane solid poly subframe bushings, JDP Motorsports rear upper control arm bushings, Texas Speed long-tube headers with 2" primaries, modified FULLY 3" Magnaflow competition catback. CAI cold-air intake. DBA rotors, Hawk pads. Tuned by Ronnie @ RS Motors in Burnsville.
438 WHP, 406 WTQ on a Mustang Dyno

Quote:
'Hellcat' sounds like some kinda 15 year old furry with liek "I'm a blue fox with wings and magical kawaii powers" kind of sh*t.
shibbs is offline   Reply With Quote
Old 03-13-2018, 03:00 PM   #12
lazerlemonta
 
lazerlemonta's Avatar
 
Drives: 2010 C6 1LT
Join Date: Dec 2011
Location: Virginia
Posts: 503
Tune out traction control for the drag strip. I ran 315/35/17 25" rears and stock fronts. Fuses pulled zero issues. Mine was a 2015
__________________
2010 C6 JET STREAM BLUE
BOLT ONS TO THE EXTREME, A FEW INTERNAL MODS (16 1.85 ROCKERS & PSI1511 SPRINGS AND A CRANK SCRAPER) AND E85 BASICALLY A MAX EFFORT STOCK HEADS STOCK CAM CAR

Best ET 10.58 @ 131.8 stock heads and stock cam
Best MPH 132
lazerlemonta is offline   Reply With Quote
Old 03-13-2018, 04:33 PM   #13
Motorboy8769
 
Drives: 2015 2ss
Join Date: Jun 2015
Location: Wooster ohio
Posts: 535
Have no clue why mine did what it did only if I spun a little bit. I don’t spin much when I launch. I wonder if you just disconnect the sensors if that would work better...???? No idea
Motorboy8769 is offline   Reply With Quote
Old 03-13-2018, 09:39 PM   #14
Pro Stock John
Writer
 
Pro Stock John's Avatar
 
Drives: 2010 SS / 1967 Camaro
Join Date: May 2009
Location: Chicago, IL
Posts: 7,059
I have been racing with the fuses pulled for a couple years. Heck my ABS has not even worked for the last year I think we broke a sensor.

But 27 front and 29 rear will will most likely trigger ABS.
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II
13.15@106 1.95 | 100% Stock
12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune
12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune
11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts
10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800
Pro Stock John is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:58 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.