You are browsing camaro5 
 |
|
02-01-2018, 10:49 PM
|
#1 |
          
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Tank Plates
Need a affordable set of tank plates. I've seen them as low as 100 bucks a set all they way to 500.
I've tried Bunker Racing out in Cali, but out of business now ( was told they made for a 70 a set) J&R in AR. wants almost 500 a set not willing to pay that much. If anyone knows who makes them or has a DYI template or drawings I'd be interested.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
02-16-2018, 08:09 PM
|
#2 |
Drives: 2010 2ss ss/rs abm, 2016 2ss/rs hbm Join Date: Feb 2009
Location: N. Phx, Az
Posts: 1,332
|
You get what you pay for, The J&R set are stout well engineered pieces. Good parts are never cheap and cheap parts are never good. You don't want to skimp on safety equipment, it's your safety after all.
__________________
URR2SLO - If you're not going fast enough, get out the way......
|
|
|
|
|
03-28-2018, 12:20 AM
|
#3 |
 Drives: 2015 Camaro 1SS 6M Join Date: Dec 2017
Location: The Freeway
Posts: 238
|
Who named them tank plates?? I had to google the term.
Make your own! Or make good templates from stiff cardboard and or thin alumimum then have a fabricator make a set. You'll be hard pressed to spend $500 on something so simple. Edit: I didn't see the vertical brace, still not a difficult task for anyone that can weld, just more labor.
__________________
 Last edited by TWOFORTYZ; 03-28-2018 at 12:22 AM. Reason: looked at more pictures. |
|
|
|
|
|
|
|
 |
|
|
