high wing spoiler self install - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

cmzoli43 · 02-22-2012, 12:28 AM

alright guys i just got the high wing for my 2011 LS ill post some pix up tomoro after noon of it installed, just so you all know, i did have to go to lowes and get a few metal drill bits in place of a hole saw. if you all have any questions PM me and ill get to you all as best i can. Im still a noob at this dont hate too much on me.

cmzoli43 · 02-26-2012, 10:14 AM

0k sorry that took so long internet has been given me trouble but its back, so this kit comes with everything you need to install in yourself, template for where to drill

1 mask it off and tap the holes

2 this is the hard part you have to drill through the body looking back now i would say take the trunk off because it will be easier, once you drill the 5 holes top and bottom your on easy street

3 put the bumper into the holes run the wires through and its almost done

4 and your done, the wing comes with a harness for the brake light on the wing, its a bit of a pain in the but to put in since the harness is behind your passenger side rear sear but fold the back down pull the panel out slightly and just replace it with the one they gave you. i had my friend at bestbuy help install. I get mixed reviews of the spoiler so far and some like it some hate it but its my car and i like it. any questions PM me

SSAINT · 02-26-2012, 03:39 PM

I like it! Nice job.

cmzoli43 · 03-04-2012, 11:24 AM

thanx saint...like i said some ppl like it some hate it but i could careless, my car my mod

ssummit camaro · 03-04-2012, 11:44 AM

Looks good. Nice job.

Shayne70 · 03-04-2012, 07:28 PM

If you have the standard lip spoiler that comes from GM do you have to buy a new hood to install that one? Or can u just remove it to add that one?

zkdreads · 03-04-2012, 07:37 PM

NICE. welcome to the HIGH WING CLUB. now all you need is this
happy modding thought!

http://www.camaro5.com/forums/showthread.php?t=207363

sene · 03-04-2012, 07:47 PM

Quote:

Originally Posted by Shayne70

If you have the standard lip spoiler that comes from GM do you have to buy a new hood to install that one? Or can u just remove it to add that one?

I think you mean trunk lid, and you will need to have a body shop fill the hole and repaint the lid as the mounting holes are different.

RANGERGOD · 03-04-2012, 07:51 PM

Looks badazz!!!

Li0nel1234 · 03-04-2012, 08:33 PM

It looks a little crooked.

Haha jk. It looks great!

Thunder_53089 · 05-23-2021, 04:22 PM

I know it's old, but I was wondering if anybody still have the drill template for an oem high wing spoiler.
Thank you

02-22-2012, 12:28 AM	#1
cmzoli43 Zoli43 Drives: 2011 Camaro LS IBM w/ high wing Join Date: May 2011 Location: Texas Posts: 8 View My Garage	high wing spoiler self install alright guys i just got the high wing for my 2011 LS ill post some pix up tomoro after noon of it installed, just so you all know, i did have to go to lowes and get a few metal drill bits in place of a hole saw. if you all have any questions PM me and ill get to you all as best i can. Im still a noob at this dont hate too much on me.

02-26-2012, 10:14 AM	#2
cmzoli43 Zoli43 Drives: 2011 Camaro LS IBM w/ high wing Join Date: May 2011 Location: Texas Posts: 8 View My Garage	0k sorry that took so long internet has been given me trouble but its back, so this kit comes with everything you need to install in yourself, template for where to drill 1 mask it off and tap the holes 2 this is the hard part you have to drill through the body looking back now i would say take the trunk off because it will be easier, once you drill the 5 holes top and bottom your on easy street 3 put the bumper into the holes run the wires through and its almost done 4 and your done, the wing comes with a harness for the brake light on the wing, its a bit of a pain in the but to put in since the harness is behind your passenger side rear sear but fold the back down pull the panel out slightly and just replace it with the one they gave you. i had my friend at bestbuy help install. I get mixed reviews of the spoiler so far and some like it some hate it but its my car and i like it. any questions PM me Attached Images

03-04-2012, 11:44 AM	#5
ssummit camaro Drives: 2013 1LE on order TPW 12/31 Join Date: Jan 2010 Location: El Paso, Texas Posts: 882	Looks good. Nice job. __________________

03-04-2012, 07:37 PM	#7
zkdreads Drives: 2010 Camaro LS V6 Join Date: Jul 2010 Location: Tampa, Florida Posts: 2,784	NICE. welcome to the HIGH WING CLUB. now all you need is this happy modding thought! http://www.camaro5.com/forums/showthread.php?t=207363 __________________ C-LO or Sonic "Without Struggle there is no progress" I am your best nightmare!

03-04-2012, 07:51 PM	#9
RANGERGOD IDBZ M.C. Drives: 12' IOM, 2SS, LS3 Join Date: Feb 2012 Location: Columbus, Ga. Posts: 562	Looks badazz!!! __________________

02-26-2012, 03:39 PM	#3
SSAINT Drives: "11 2SS/RS VR vert BG/BG SW stripes Join Date: Nov 2010 Location: Northern NJ Posts: 385	I like it! Nice job.

03-04-2012, 11:24 AM	#4
cmzoli43 Zoli43 Drives: 2011 Camaro LS IBM w/ high wing Join Date: May 2011 Location: Texas Posts: 8 View My Garage	thanx saint...like i said some ppl like it some hate it but i could careless, my car my mod

03-04-2012, 07:28 PM	#6
Shayne70 Drives: 2010 Black 2ss Chevy Camaro Join Date: Nov 2011 Location: Pearl City Posts: 341	If you have the standard lip spoiler that comes from GM do you have to buy a new hood to install that one? Or can u just remove it to add that one?

03-04-2012, 08:33 PM	#10
Li0nel1234 What should I name my car Drives: 2010 Camaro 2SS RS IOM Join Date: Jul 2009 Location: San Antonio, TX Posts: 786 View My Garage	It looks a little crooked. Haha jk. It looks great! __________________ Performance: ARH 2"/"3 headers + ARH 3" HF catback system, SS brake lines, hawk HP+ pads, motul RBF 600 fluid, K&N CAI (w/custom insulation), plug wires, air scoop, Hurst STS, Pedders Track II suspension, 18x10 wheels, 295/45/18 Nitto NT05s Looks: powder coated iom calipers, LED foglights w/ always on harness, custom painted bowties, window tint, smoke tinted tail lights etc, oem gfx w/ custom outlets, painted taillight bezels, all weather trunk mat

05-23-2021, 04:22 PM	#11
Thunder_53089 Drives: 10 CAMARO Join Date: May 2021 Location: Wi Posts: 2	High wing spoiler template I know it's old, but I was wondering if anybody still have the drill template for an oem high wing spoiler. Thank you

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Diagnostic Trouble Codes (DTCs) for OBD II equipped GM vehicles	steeleshark2	Tuning / Diagnostics -- engine and transmission	11	04-08-2020 10:49 PM
CEL - P1682	PSU SS	Tuning / Diagnostics -- engine and transmission	4	09-29-2011 07:27 PM
High wing spoiler	LiveGr8	Cosmetics and Lighting Modification Discussions	27	08-31-2010 01:29 PM
New Camo shots of a Camaro	bballr4567	Camaro ZL1 Forum - ZL1 Specific Topics	150	02-18-2010 12:13 PM
News on GM high wing spoiler	Laforce	Cosmetics and Lighting Modification Discussions	11	02-14-2010 03:12 AM