1le splitter 2014-2015 ss - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

mikeman · 09-23-2020, 01:10 PM

You can wrap it.

jokrz187 · 09-24-2020, 07:17 AM

Quote:

Originally Posted by Att3mpt

i thought about painting over it but that just seem too difficult. not sure how well the paint will stick onto the preexisting one

Well you would have to prep the surface and in doing so the new paint will stick but I like the idea of wrapping it. That I might do and I always wanted to try it to see if I could do that. I love learning new skill sets. For me painting it is a lot easier and fun to do. But I have makeshift paint booth that I can put up in half an hour in my garage.

jokrz187 · 09-24-2020, 07:18 AM

Quote:

Originally Posted by mikeman

You can wrap it.

That's a great idea and I have wanted to try it so why not on a small part to practice on. My wife is going to hate this, now I have an excuse to buy the materials. Lol

mikeman · 09-24-2020, 12:30 PM

Quote:

Originally Posted by jokrz187

That's a great idea and I have wanted to try it so why not on a small part to practice on. My wife is going to hate this, now I have an excuse to buy the materials. Lol

InFiD3ViL · 09-24-2020, 12:49 PM

Quote:

Originally Posted by jokrz187

That's a great idea and I have wanted to try it so why not on a small part to practice on. My wife is going to hate this, now I have an excuse to buy the materials. Lol

That's a good idea. I have wrapped parts before. Getting some practice with the wrap helps to get accustomed to how it handles and conforms around edges and different shapes.

I had very good luck with 3M wraps as they are very forgiving and rather thin and stretchy, very good for beginners. I wrapped my hood in 3M 1080 Satin Black and it came out amazing. I also have a small roll of very nice looking gloss carbon fiber VViViD wrap that was a nightmare to work with. It's super thick and hard to get it to conform to anything that isn't flat.

This is just to give you an idea to research your wrap as well. You can pretty much get any color and finish you want, but learning about what is easy to work with for specific parts helps a lot.

jokrz187 · 09-25-2020, 10:13 AM

Thanks for the info, I appreciate it.

jokrz187 · 10-01-2020, 05:44 PM

Got my splitter in today. Lines up great, I'll have to figure out of i want to wrap it or paint it.

InFiD3ViL · 10-01-2020, 07:44 PM

Nice piece! That actually looks like it might be very easy to wrap...or paint lol.

Silveradoss573 · 09-07-2021, 02:33 PM

Quote:

Originally Posted by Scotty D

You could always do a Anderson carbon fiber one huge money but nice

Hey Scott, did you install one of these by chance? Been doing some looking but can't seem to find much info on the forum let alone pictures.

Arvin712 · 05-11-2022, 10:05 AM

Quote:

Originally Posted by Att3mpt

Hi, I'm trying to find the OEM front splitter to put on my Camaro ss.
I know the part number is #22997432 but it seems like they are discontinued. any other good alternative? I hear the T4 FROM ACS isn't as sturdy so I rather spend extra on the OEM.

is there a place I can find the OEM GM one? Will calling a chevy dealer be of any help?

thx

I have mine for sale. asking 650. in great condition.

Bluebagger06 · 05-13-2022, 04:22 PM

Dont know where you heard a ACS T-4 isnt sturdy but that is false!!

joekono · 05-13-2022, 04:46 PM

Quote:

Originally Posted by Bluebagger06

Dont know where you heard a ACS T-4 isnt sturdy but that is false!!

I agree with Bluebagger06, I bought mine last year and have some lower bumper work to do before I install it. I know I few others that have it and it's solid. Pic with it fitted on with the bottom of mine with the 2 10mm bolts. I took this pic before I bought staggered 20 x 9 and 20 x 10 Factory reproduction rims and Conti tires.

1JEWLDSSRS · 05-14-2022, 07:32 AM

Quote:

Originally Posted by joekono

I agree with Bluebagger06, I bought mine last year and have some lower bumper work to do before I install it. I know I few others that have it and it's solid. Pic with it fitted on with the bottom of mine with the 2 10mm bolts. I took this pic before I bought staggered 20 x 9 and 20 x 10 Factory reproduction rims and Conti tires.

Lookin good joe!!! As always...

joekono · 05-14-2022, 09:17 AM

Quote:

Originally Posted by 1JEWLDSSRS

Lookin good joe!!! As always...

Thanks bro!!!!!! I'll be in touch.

09-25-2020, 10:13 AM	#20
jokrz187 Drives: 2015 1SS Join Date: Jun 2017 Location: Stafford, VA Posts: 402 View My Garage	Thanks for the info, I appreciate it. __________________ ------------------------------------------------------- Custom TSP Stage 2 Cam/GPI intake Ported Rod Mod /VARARAM CAI/Mishimoto Catch Can/1 LE front & rear sway bars/ engine cover/fuse box custom painted, strut tower brace, Texas Speed LT, Hi Flo Cats, Magnum Tru-X pipe, NGK Spark Plugs, PCM Spark Plug Wire, Painted Calipers, CF Spoiler w/wicker bill.

10-01-2020, 05:44 PM	#21
jokrz187 Drives: 2015 1SS Join Date: Jun 2017 Location: Stafford, VA Posts: 402 View My Garage	Got my splitter in today. Lines up great, I'll have to figure out of i want to wrap it or paint it. Attached Images __________________ ------------------------------------------------------- Custom TSP Stage 2 Cam/GPI intake Ported Rod Mod /VARARAM CAI/Mishimoto Catch Can/1 LE front & rear sway bars/ engine cover/fuse box custom painted, strut tower brace, Texas Speed LT, Hi Flo Cats, Magnum Tru-X pipe, NGK Spark Plugs, PCM Spark Plug Wire, Painted Calipers, CF Spoiler w/wicker bill.

05-13-2022, 04:22 PM	#25
Bluebagger06 Drives: 2012 camaro ss Join Date: Sep 2018 Location: Illinois Posts: 441	Dont know where you heard a ACS T-4 isnt sturdy but that is false!! __________________ GPI Powered

09-23-2020, 01:10 PM	#15
mikeman Banned Drives: 2015 Camaro Join Date: Aug 2018 Location: My Garage Posts: 1,125	You can wrap it.

10-01-2020, 07:44 PM	#22
InFiD3ViL Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016 Location: Spring Hill, FL Posts: 4,575	Nice piece! That actually looks like it might be very easy to wrap...or paint lol. __________________ 2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI