1le splitter 2014-2015 ss - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Bluebagger06 · 05-14-2022, 01:22 PM

Quote:

Originally Posted by joekono

I agree with Bluebagger06, I bought mine last year and have some lower bumper work to do before I install it. I know I few others that have it and it's solid. Pic with it fitted on with the bottom of mine with the 2 10mm bolts. I took this pic before I bought staggered 20 x 9 and 20 x 10 Factory reproduction rims and Conti tires.

Ive tried alot of different splitters and for the money and ease of installation ,the ACS is the best!!

Joe.G · 05-14-2022, 09:42 PM

I have the ACS T4 I have not mounted it yet, I have heard they do Crack/Break easy. I wish I was able to mount it with out drilling permanent holes that are visible when removed.

Bluebagger06 · 05-15-2022, 02:31 PM

Quote:

Originally Posted by Joe.G

I have the ACS T4 I have not mounted it yet, I have heard they do Crack/Break easy. I wish I was able to mount it with out drilling permanent holes that are visible when removed.

Again, I have ran this splitter for 2 years now back and forth on the interstate ,85- 90 mph and it hasn't moved at all. Mount it the right way as per directions and it is stout! It will not budge pushing or pulling on it, and if for some reason it does break , which i dont see happening, i will get the same thing, It 10 times better than anything i bought off of ebay or amazon!!

Joe.G · 05-15-2022, 08:31 PM

Have you scraped it at all? looks like it would not hold up well to any kind of impact, I do not plan on that but you never know. I ordered mine Matte Black and they definitely didn't pain it the best nor did they pain the bottom, And what supposedly was in stock took over 2 months to get.

05-14-2022, 09:42 PM	#30
Joe.G Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021 Location: NY Posts: 1,264	I have the ACS T4 I have not mounted it yet, I have heard they do Crack/Break easy. I wish I was able to mount it with out drilling permanent holes that are visible when removed. __________________ GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount.

05-15-2022, 08:31 PM	#32
Joe.G Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021 Location: NY Posts: 1,264	Have you scraped it at all? looks like it would not hold up well to any kind of impact, I do not plan on that but you never know. I ordered mine Matte Black and they definitely didn't pain it the best nor did they pain the bottom, And what supposedly was in stock took over 2 months to get. __________________ GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount.