02-18-2014, 10:59 PM | #1 |
Drives: Supercharged LLT Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,437
|
Sway bar brackets
Hey c5 need sum help . A member is selling a sway bar but with no sway bar bracket ( the half circle bracket ) or the bushing inside . The bar is 32mm rear bar pedders fe3 . I don't think I could use my stock bracket cause it would be to small . Does any body know what bracket I could get that would work ? Any help would be appreciated .
|
02-18-2014, 11:38 PM | #2 |
Drives: SS Join Date: Mar 2013
Location: USA
Posts: 221
|
Hotchkis has 'em.
|
02-18-2014, 11:46 PM | #3 |
Drives: Supercharged LLT Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,437
|
Ok so just read the the rear sway bar reuses the brackets and just replaces the bushing in the bracket. Any vendors have the sway bar bushings for the pedders fe3 bar it's a 32mm. ???
|
02-18-2014, 11:47 PM | #4 |
Drives: Supercharged LLT Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,437
|
Yea saw they had brackets and bushings for like 189 . I wonder if they sell just the bushing and if it would fit the pedders bar
|
02-19-2014, 12:01 AM | #5 |
Drives: Supercharged LLT Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,437
|
I'll check that out
|
02-19-2014, 07:48 AM | #6 |
Drives: Supercharged LLT Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,437
|
Would these work they say it's for a Chrysler front sway . But seem to be the right size http://m.summitracing.com/parts/ped-ep3522-32
|
02-19-2014, 08:43 AM | #7 |
I have a 2012 SS with FE4 suspension.
The bushings that came with my sway bar kit were too large to fit inside the factory "D" clamps. I ordered OEM ZL1 "D" clamps from the Chevy dealer and everything bolted right together. |
|
02-19-2014, 01:27 PM | #8 |
Drives: Supercharged LLT Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,437
|
Interesting . Do you have the part # ?
|
02-19-2014, 01:36 PM | #9 |
Drives: 2013 IOM 2SS 1LE Join Date: Aug 2013
Location: Damascus Or
Posts: 403
|
BMR also sells a 32mm dia bar so you might try them.
__________________
|
02-19-2014, 04:31 PM | #10 |
Drives: Supercharged LLT Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,437
|
Well it looks like you could use oem bracket . And when they sold solution c it only came with the bushing to replace
|
02-19-2014, 05:17 PM | #11 |
Drives: 2017 1SS 6spd Join Date: Jan 2011
Location: Utah
Posts: 2,869
|
Don't forget Energy Suspensions, I think they make alot of the bushings sold with these aftermarket bars... and the price is right!
http://www.energysuspensionparts.com...sp?prod=9.5166 Also note this includes the greaseable bracket and washers. Of course you always order suspension parts in RED! |
02-19-2014, 07:02 PM | #12 | |
Drives: Supercharged LLT Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,437
|
Quote:
|
|
02-19-2014, 08:16 PM | #13 |
Drives: 2010 2ss red LS3 Join Date: Aug 2011
Location: perkasie pa
Posts: 533
|
Pedders bars use OEM brackets & Pedders bushing.
|
02-19-2014, 11:20 PM | #14 |
Drives: Supercharged LLT Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,437
|
^^^ yea should rename thread sway bushing.
I found two so far energy and prothane any opinions on which is better ? |
|
|
|
|