bad vibration between 40-60mph all gears - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bhall82 · 10-01-2012, 03:53 PM

Quote:

Originally Posted by Driveshaftshop

The actual play is 1" yes there was a manufacturer we had make some parts that were made from the wrong material. im not sure this is his problem but we are going to send out a set to make sure its not.

Great customer service once again by a great company with great products

Mr. iNCREDIBLE · 10-01-2012, 04:11 PM

typically speed related vibration is due to tire balance issue.

just sayin'

Jamie Mac · 10-01-2012, 05:08 PM

Quote:

Originally Posted by Mr. iNCREDIBLE

typically speed related vibration is due to tire balance issue.

just sayin'

I did check to see if I had any missing weights. There do not appear to be any missing.

Mr. iNCREDIBLE · 10-01-2012, 06:05 PM

Quote:

Originally Posted by Jamie Mac

I did check to see if I had any missing weights. There do not appear to be any missing.

doesn't mean the tires are balanced though..

Kilo-9 · 10-01-2012, 09:28 PM

I know he had the wheels rebalanced on the way to the fest and it didn't rectify the situation.

sixty9fordkiller · 10-11-2012, 04:48 PM

check driveshaft to differential bolts. my car had that problem once and those suckers were the culprit

SGOS252382 · 10-13-2012, 05:37 PM

Due to all your new suspension mods I would guess its in the driveshaft, but is your car a manual or autmatic?

I didn't read any mention of L99 A6 or LS3 M6.

The reason I mention this is I had a vibration associated with acceleration and it was my FTI converter.

Jamie Mac · 10-26-2012, 07:42 PM

Update:

I finally got a chance to swap axles this afternoon. DSS sent me their new design. I was only able to take it for a short drive but it appears to have fixed the issue. No vibrations from 0-80. I probably won't get a chance to get it out for a longer drive until after the hurricane blows through PA. Fingers crossed.

Jamie Mac · 10-26-2012, 07:43 PM

Quote:

Originally Posted by SGOS252382

Due to all your new suspension mods I would guess its in the driveshaft, but is your car a manual or autmatic?

I didn't read any mention of L99 A6 or LS3 M6.

The reason I mention this is I had a vibration associated with acceleration and it was my FTI converter.

Stick

lsaterz28 · 10-26-2012, 07:57 PM

axle sounds correct we had replaced several on camaros with 650hp to 850hp at rear wheels. Stock axles would not hold have used G Forse 1320 to solve problem

10-01-2012, 09:28 PM	#19
Kilo-9 Dog Is My Copilot Drives: 2011 2SS/RS LS3 Join Date: Jun 2009 Location: Pittsburgh, PA Posts: 1,394	I know he had the wheels rebalanced on the way to the fest and it didn't rectify the situation. __________________

10-11-2012, 04:48 PM	#20
sixty9fordkiller Donkey Dick Cam Camaro Drives: 2010 2SS/RS LS3 M6 Join Date: Oct 2009 Location: Los Angeles, CA Posts: 1,998	check driveshaft to differential bolts. my car had that problem once and those suckers were the culprit __________________ Bone Stock

10-26-2012, 07:42 PM	#22
Jamie Mac NCM-WINR Drives: 2010 SS/RS IOM 2014 2LT Stingray Join Date: Mar 2009 Location: Pittsburgh Posts: 2,324	Update: I finally got a chance to swap axles this afternoon. DSS sent me their new design. I was only able to take it for a short drive but it appears to have fixed the issue. No vibrations from 0-80. I probably won't get a chance to get it out for a longer drive until after the hurricane blows through PA. Fingers crossed. __________________ also drives a heavily modified Jeep Wrangler. It has LED headlights and wheel weights blacked out with Plasti Dip. It's Baller.

10-01-2012, 04:11 PM	#16
Mr. iNCREDIBLE Drives: 2012 2SS/RS Convertible Join Date: Aug 2012 Location: SoCal Baby... Posts: 2,530	typically speed related vibration is due to tire balance issue. just sayin'

10-13-2012, 05:37 PM	#21
SGOS252382 Drives: 2010 Camaro 2SS/RS Join Date: Mar 2008 Location: S.W. Florida Posts: 6,294	Due to all your new suspension mods I would guess its in the driveshaft, but is your car a manual or autmatic? I didn't read any mention of L99 A6 or LS3 M6. The reason I mention this is I had a vibration associated with acceleration and it was my FTI converter.

10-26-2012, 07:57 PM	#24
lsaterz28 the vetteman Drives: 68Z/28,09G8/GT,11RS/SS VT,13GMC PU Join Date: Nov 2009 Location: plainfield indiana Posts: 201 View My Garage	axle sounds correct we had replaced several on camaros with 650hp to 850hp at rear wheels. Stock axles would not hold have used G Forse 1320 to solve problem