Dent puller - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Valkyrie14 · 06-17-2020, 06:06 PM

Has anyone used the Eastwood dent puller? A deer ran up along side of me and hit my driver side fender. Minor dents, we both walked away to tell the tale. Dents are very minor, not enough for me to open an insurance claim, but I don’t want them there forever either.

Looking for a good dent puller.

gtstorey · 06-18-2020, 07:43 AM

I assume you are talking about their hot glue paintless dent removal kit? My little experience with that type kit is they only work with dents that you could push out by hand if you can get to the back side.

Valkyrie14 · 06-18-2020, 08:03 AM

The dents are right above where the CAMARO on the fender. Not sure if I can get in there. I also have on top of the fender next to the hood that came with the car. It looks more like a hail dent.

ChibiBlackSheep · 06-18-2020, 08:13 AM

Quote:

Originally Posted by Valkyrie14

The dents are right above where the CAMARO on the fender. Not sure if I can get in there. I also have on top of the fender next to the hood that came with the car. It looks more like a hail dent.

Take off the wheel liner and see if you can get it from behind. Might be worth a shot to look there and if not calling a local detail shop to see if they do PDR.

06-17-2020, 06:06 PM	#1
Valkyrie14 Valkyrie14 Drives: Chevrolet Camaro SS Join Date: Mar 2020 Location: Eau Claire, Wisconsin Posts: 962	Dent puller Has anyone used the Eastwood dent puller? A deer ran up along side of me and hit my driver side fender. Minor dents, we both walked away to tell the tale. Dents are very minor, not enough for me to open an insurance claim, but I don’t want them there forever either. Looking for a good dent puller. __________________ 2014 SS LS3/LSA Supercharger, 10% Super Damper, 2.55 upper, AGP Dual Pump, ID 1050 injectors, Pegasus solid rear cradle bushings, LT Headers, Roto-Fab CAI, Elite E2 catch can, E85 corn fed, 160 Thermostat, Monster Twin Disk, MGW Short Throw shifter, Tick Clutch Master Cylinder, HP Tuners, JL Audio system.

06-18-2020, 08:03 AM	#3
Valkyrie14 Valkyrie14 Drives: Chevrolet Camaro SS Join Date: Mar 2020 Location: Eau Claire, Wisconsin Posts: 962	The dents are right above where the CAMARO on the fender. Not sure if I can get in there. I also have on top of the fender next to the hood that came with the car. It looks more like a hail dent. __________________ 2014 SS LS3/LSA Supercharger, 10% Super Damper, 2.55 upper, AGP Dual Pump, ID 1050 injectors, Pegasus solid rear cradle bushings, LT Headers, Roto-Fab CAI, Elite E2 catch can, E85 corn fed, 160 Thermostat, Monster Twin Disk, MGW Short Throw shifter, Tick Clutch Master Cylinder, HP Tuners, JL Audio system.

06-18-2020, 07:43 AM	#2
gtstorey Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017 Location: Huntsville, AL Posts: 2,142	I assume you are talking about their hot glue paintless dent removal kit? My little experience with that type kit is they only work with dents that you could push out by hand if you can get to the back side.