10-17-2020, 01:01 AM | #1 |
Drives: 2019 Camaro ZL1 10 speed Join Date: May 2017
Location: Phoenix
Posts: 48
|
WTB Z28 WHEELS
Looking for some z28 wheels off 2014-2015
|
10-17-2020, 02:16 AM | #2 |
|
Did you try GM, not sure if they are discontinued or not.
|
10-17-2020, 10:08 AM | #3 |
Drives: 2018 ZLE (M6/hyper blue) Join Date: Nov 2015
Location: Lithia, FL
Posts: 762
|
If you want to come to Tampa, I have a set .... Don't have time to deal with shipping though (plus it adds close to 500 bucks).
|
10-17-2020, 10:58 AM | #4 |
|
I picked up my extra set this summer from scoggin dickey via summit. But it was a set that was sitting on SD’s shelf for years.
Are you looking for excellent, track set or ? But as HoodCheck said, shipping is interesting and it seems to be increasing $$ daily. |
10-17-2020, 11:30 AM | #5 |
Drives: '14 1LE Join Date: Nov 2013
Location: NJ
Posts: 2,435
|
I have a set available in NJ, but wouldn't know how to go about shipping them.
|
10-18-2020, 02:35 AM | #6 |
Drives: 2019 Camaro ZL1 10 speed Join Date: May 2017
Location: Phoenix
Posts: 48
|
Look for a good set not tracked if possible.
|
10-18-2020, 06:53 AM | #7 |
Drives: 2018 red hot zl/1 camaro Join Date: Nov 2017
Location: pittsburgh pa.
Posts: 30
|
try phastek performance.about 1300.00
|
10-18-2020, 07:17 AM | #8 |
|
|
10-18-2020, 02:11 PM | #9 |
Drives: 2019 Camaro ZL1 10 speed Join Date: May 2017
Location: Phoenix
Posts: 48
|
Thank you, but I'm looking for a set of oem only.
|
10-18-2020, 05:02 PM | #10 |
Banned
Drives: 2015 Camaro Join Date: Aug 2018
Location: My Garage
Posts: 1,125
|
$$$$$. Get ready to sell a kidney for a good set of OEM Z28 wheels. lol!
|
10-20-2020, 07:52 AM | #11 |
Drives: Camaro SS Join Date: Jan 2015
Location: phoenix
Posts: 287
|
I wish I bought more z28 sets when they were easier to find.
|
10-20-2020, 11:10 AM | #12 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
|
10-20-2020, 07:35 PM | #13 |
Drives: 2019 Camaro ZL1 10 speed Join Date: May 2017
Location: Phoenix
Posts: 48
|
|
10-21-2020, 09:41 AM | #14 |
Drives: 2018 ZLE (M6/hyper blue) Join Date: Nov 2015
Location: Lithia, FL
Posts: 762
|
He'll get you hooked up
If you have a standard ZL1, you'll want to look into some spacers for the front, or a little quick snip to the notch on your struts (had some on my '17 ZL1). Its a *tight* squeeze otherwise...rear is fine. 5mm spacer on the front will make it stick out a smidge more than the rear, just as a heads up...but the wheels themselves look bad ass on it (I used 5mm spacers, still looked great). If you have a ZLE, there should be no adjustments for fitment. |
|
|
Thread Tools | |
|
|