Anyone have ADM cold air scoop? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Rocky918 · 02-18-2011, 11:41 PM

I want to buy the ADM cold air scoop http://autoagenda.com/2010-camaro-v6...cold-air-scoop for my intake system obviously but it says you need to remove or relocate the washer bottle. Has anyone done this? I need my washing fluid so how hard is it to relocate the bottle? I know you need to take the front wheel off to do this, but besides that, do you need a harness for the bottle?

Thanks guys

mpiper · 02-19-2011, 12:04 AM

Get the Roto-Fab Winshield Washer bottle Relocation Kit!

Here's where they introduced it: C5 Link

Roto-fab 1 · 02-19-2011, 09:35 PM

You can follow the above link to learn about our W/W reservoir kit. It does come with everything you need to complete the install and requires no modifications to your car. No cutting, drilling, etc.

IndeedSS1 · 02-19-2011, 09:39 PM

I have the scoop and the Roto-Fab washer bottle kit. The bottle holds a lot of fluid, looks factory, the kit is well put together, has great instructions, and is packaged like it's made of glass.

Do it.

Jacking up the car and taking off the wheel is the hard part. No special harness needed the pump uses the original wiring, as its not that far away from it's stock location. The bottle relocates a ways, but has a long hose supplied.

Oh and OP, this is the V6 section I see you have the V8.

Rocky918 · 02-19-2011, 09:47 PM

Quote:

Originally Posted by IndeedSS1

I have the scoop and the Roto-Fab washer bottle kit. The bottle holds a lot of fluid, looks factory, the kit is well put together, has great instructions, and is packaged like it's made of glass.

Do it.

Jacking up the car and taking off the wheel is the hard part. No special harness needed the pump uses the original wiring, as its not that far away from it's stock location. The bottle relocates a ways, but has a long hose supplied.

Oh and OP, this is the V6 section I see you have the V8.

Opps, my bad, but non the less, this should still be the same for the V8... thanks for pointing that out ...

thanks for the advice and links guys!

SSawdusty · 02-21-2011, 10:35 AM

Here's my Roto-Fab W/W installed with the ADM cold air intake and scoop. You will be impressed with both. They are well made and easy to install.

http://www.camaro5.com/forums/showthread.php?t=128155

13 ZL1 · 02-21-2011, 10:51 AM

This one will be available soon.

http://www.camaro5.com/forums/showthread.php?t=126626

BB11 · 03-04-2014, 09:36 PM

Where did u purchase your air scoop??

Quote:

Originally Posted by IndeedSS1

I have the scoop and the Roto-Fab washer bottle kit. The bottle holds a lot of fluid, looks factory, the kit is well put together, has great instructions, and is packaged like it's made of glass.

Do it.

Jacking up the car and taking off the wheel is the hard part. No special harness needed the pump uses the original wiring, as its not that far away from it's stock location. The bottle relocates a ways, but has a long hose supplied.

Oh and OP, this is the V6 section I see you have the V8.

Apex Motorsports · 03-05-2014, 08:18 AM

Wow! Talk about a necro-thread. Since this thread was posted over 3 years ago Apex Motorsports has released a scoop and washer tank relocation package. You should give it a look.

rtcat600man · 03-05-2014, 11:27 AM

Quote:

Originally Posted by Apex Chase

Wow! Talk about a necro-thread. Since this thread was posted over 3 years ago Apex Motorsports has released a scoop and washer tank relocation package. You should give it a look.

Did you eve look into trying to create taht scoop for the INJEN? We spoke about it at one time on another thread. NEver heard anything back yet. I am going to be cutting into the back of my grille next month to open up some air to get better flow to my INJEN. I am interested in testing anything you come up with, other wise my created mine will have to work up something for myslef.

Ventmaster · 03-05-2014, 03:18 PM

Quote:

Originally Posted by BB11

Where did u purchase your air scoop??

Apex Speed's Scoop/washer bottle combo is first rate BB11. You can't go wrong there.

Apex Motorsports · 03-05-2014, 05:55 PM

Quote:

Originally Posted by rtcat600man

Did you eve look into trying to create taht scoop for the INJEN? We spoke about it at one time on another thread. NEver heard anything back yet. I am going to be cutting into the back of my grille next month to open up some air to get better flow to my INJEN. I am interested in testing anything you come up with, other wise my created mine will have to work up something for myslef.

No, it is one of those things that got moved to the back burner and forgotten about to be honest. It would probably be as simple as taking one of our scoops and chopping the back of it off.

Quote:

Originally Posted by Ventmaster

Apex Speed's Scoop/washer bottle combo is first rate BB11. You can't go wrong there.

Thanks!

rtcat600man · 03-05-2014, 08:25 PM

Quote:

Originally Posted by Apex Chase

No, it is one of those things that got moved to the back burner and forgotten about to be honest. It would probably be as simple as taking one of our scoops and chopping the back of it off.

Thanks!

NP, I will look at what I come up with and discuss it further with you, maybe together we can work something out for you to produce for others once I work out some of the details.

Apex Motorsports · 03-06-2014, 07:19 AM

Quote:

Originally Posted by rtcat600man

NP, I will look at what I come up with and discuss it further with you, maybe together we can work something out for you to produce for others once I work out some of the details.

Sounds good. Look forward to hearing from you.

02-18-2011, 11:41 PM	#1
Rocky918 Drives: SS for Super Sexy! Join Date: May 2009 Location: South Florida Posts: 746	Anyone have ADM cold air scoop? I want to buy the ADM cold air scoop http://autoagenda.com/2010-camaro-v6...cold-air-scoop for my intake system obviously but it says you need to remove or relocate the washer bottle. Has anyone done this? I need my washing fluid so how hard is it to relocate the bottle? I know you need to take the front wheel off to do this, but besides that, do you need a harness for the bottle? Thanks guys __________________ - Life is to short to let it pass you by

02-19-2011, 09:39 PM	#4
IndeedSS1 Drives: 2010 Camaro SS LS3 Join Date: Sep 2010 Location: Eastern MO Posts: 3,786	I have the scoop and the Roto-Fab washer bottle kit. The bottle holds a lot of fluid, looks factory, the kit is well put together, has great instructions, and is packaged like it's made of glass. Do it. Jacking up the car and taking off the wheel is the hard part. No special harness needed the pump uses the original wiring, as its not that far away from it's stock location. The bottle relocates a ways, but has a long hose supplied. Oh and OP, this is the V6 section I see you have the V8. __________________ She is only memory now.

02-21-2011, 10:35 AM	#6
SSawdusty Crewel Jewel Drives: RJT-2SS-RS-6M Join Date: Nov 2009 Location: Nanaimo, BC Posts: 426	Here's my Roto-Fab W/W installed with the ADM cold air intake and scoop. You will be impressed with both. They are well made and easy to install. http://www.camaro5.com/forums/showthread.php?t=128155 __________________ Whippled

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fastlane Pipeline Cold Air Intake at Phastek Performance	Jason@Phastek	V8 Bolt-Ons & Tunes	2	03-30-2016 07:19 AM
Cold Air Inductions Intake System! ADM Performance Cold Air Scoop! & Packages!	AutoAgenda	V8 Bolt-Ons & Tunes	438	11-23-2013 10:49 PM
WASHER BOTTLE REMOVAL PICS ADM AIR SCOOP INSTALL	1969to2010	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	13	11-08-2010 09:00 AM
ADM Performance "Street" and "Race" intake systems from Apex Motorsports	Apex Motorsports	V8 Bolt-Ons & Tunes	12	07-16-2010 07:47 PM
Breathless Performance Polished Cold Air Intakes!	MoranoRacing	V8 Bolt-Ons & Tunes	0	06-29-2010 10:52 AM

02-19-2011, 12:04 AM	#2
mpiper Drives: 2011 Black 1LT RS Join Date: May 2010 Location: Texas Posts: 496	Get the Roto-Fab Winshield Washer bottle Relocation Kit! Here's where they introduced it: C5 Link

02-19-2011, 09:35 PM	#3
Roto-fab 1 Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009 Location: Arizona Posts: 2,682	You can follow the above link to learn about our W/W reservoir kit. It does come with everything you need to complete the install and requires no modifications to your car. No cutting, drilling, etc.

02-21-2011, 10:51 AM	#7
13 ZL1 Drives: 2013 IOM ZL1 Join Date: Nov 2009 Location: Manteca CA Posts: 683	This one will be available soon. http://www.camaro5.com/forums/showthread.php?t=126626

03-05-2014, 08:18 AM	#9
Apex Motorsports Drives: 2000 Camaro SS Join Date: Feb 2010 Location: Louisville, Ky. Posts: 25,179	Wow! Talk about a necro-thread. Since this thread was posted over 3 years ago Apex Motorsports has released a scoop and washer tank relocation package. You should give it a look.