06-30-2019, 02:39 PM | #1 |
Drives: Camaro 2ss Join Date: Jun 2019
Location: Buena Park
Posts: 3
|
Weird grinding noise under my car
So I hit my car in a speed bump pretty bad. And right after it started making this grinding noise that I’m not familiar with. Plus I don’t only hear it I feel the grinding when sitting on the passenger seat. So if anyone can help please respond to this thread.
Mods: long tube headers Straight pipe E85 tune Coil overs Here’s a link to a video of the noise: https://youtu.be/Zw7D4S-GCWg Last edited by Johnlo_71; 07-04-2019 at 10:56 AM. |
06-30-2019, 03:49 PM | #2 |
Chevy Enthusiast.
Drives: 2015 Camaro ZL1 Summit White Join Date: Jan 2019
Location: Calgary Area, Alberta
Posts: 221
|
Get it up in the air and inspect. Sounds like it's in the exhaust.
__________________
Levon H. Bone Stock |
07-02-2019, 01:26 PM | #3 |
Drives: Camaro 2ss Join Date: Jun 2019
Location: Buena Park
Posts: 3
|
Ima do that this weekend hopefully it’s that. Because to me it sounds way more then just the exhaust.
|
07-03-2019, 12:19 AM | #4 |
Drives: 2014 Camaro SS L99 Join Date: Nov 2017
Location: GrandRapids,Michigan
Posts: 225
|
Just had the same issue, Turns out my E brake cable knocked loose and was rubbing against my drive shaft. Hopefully your's is an easy fix as well
__________________
MODS: GPI MAX Package ported and milled heads+(229/250,111 LSA),Johnson 2110 Lifters,BTR .660 Springs,CHE Trunnions,C5R chain,DSX Flex Fuel kit,LSA Injectors,ZL1 Fuel Pump,MAMO Ported MSD Intake manifold,BOWhite ported Throttle body,25% UDP,CAI Intake,Intake Scoop,Kooks 1 7/8 headers,Borla attak catback,Elite catch can,BMR Motor mounts,CircleD 5C 4000-4200 Torque converter,ADM trans cooler,Jannetty Trans dipstick,DSS Aluminum Driveshaft,3.91 Gears,Eaton TrueTrac,JRE Billet caps,BMR Trailing arms,BMR Toe rods,BMR rear sway bar,Pegasus Solid sub frame bushings,DSS 1,000HP Axles
|
08-09-2019, 02:00 PM | #5 |
Drives: Camaro 2ss Join Date: Jun 2019
Location: Buena Park
Posts: 3
|
Turns out it was my exhaust. I hit it hard enough to where it bent right on the X pipe. And it was just rattling pretty bad. Thank you guys so much for the help.
|
|
|
|
|