Auto Blip and Road Course is Heaven....... - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

dynosteve · 03-28-2017, 05:54 PM

How many AutoBlippers and track rats are going to be at Pitt-Race and Mid-Ohio with Chin Motorsports Memorial Day weekend this year?

Would love to meet and greet up with as many of you as possible and if you need any tuning or anything else on site we would be more then happy to help

dynosteve · 04-02-2017, 09:11 AM

Auto-Blip behind one of the best GM engines ever made the LS7....The Auto-Blip truly works so well

https://youtu.be/It8I-RMXCCw

dynosteve · 04-10-2017, 09:26 PM

Auto-Blip behind one of the best GM engines ever made the LS7....The Auto-Blip truly works so well

https://youtu.be/It8I-RMXCCw

tylerio · 04-11-2017, 04:29 AM

I put one in my Z28 last week. Went to track yesterday. The thing worked perfectly. No more blown downshifts. Well, I should say fewer blown downshifts.. I did manage to "downshift" from 4th to 5th at one of the corners!

Superman09 · 04-12-2017, 06:18 PM

Worked a couple extra jobs, made a little extra cash, ordered my auto blip. Can't wait for it to get here and try it out

Sent from my VS995 using Tapatalk

Stephen12ZL1 · 04-12-2017, 11:23 PM

I am a huge proponent of the Auto Blip...I must have blipped on track 400 times in the last two days and it never misses a beat. I especially love to "double blip" in a braking zone. All you have to do is perfect the timing of your clutch pedal foot to your gear selector arm.

Superman09 · 04-18-2017, 04:53 PM

Ordered my auto-blip late on the 13th, fully expecting it to not ship until the 17th or 18th. But what does RDP do?????? They shipped it out literally first thing Friday morning and I received it before lunch on Monday. 2 day shipping over a holiday weekend. They could have easily phoned it in and not shipped it till this week but they didn't. RDP y'all rock, now to get this thing installed.

Sent from my VS995 using Tapatalk

RLHMARINES · 04-18-2017, 07:59 PM

Post up picks on where you guys are installing your auto blip devices.....I need one for sure.

Superman09 · 04-19-2017, 10:21 PM

Finally got it installed. Took me about 1.5 hours but that was with talking to the neighbors and a phone call to my mom (nurse.....more on that later).
Both of my printers are outta ink so I was reading the instructions on my phone. Instructions are straight forward, very detailed, and easy to follow. I couldn't get my clutch sensor unplugged so I just traced the wires back, cut through the covering, and put the clips on there. Decided I would then mount the controller. I used the little trim piece to the left of the Speedo right above the air vent. Used the back plate as a template and drilled a couple small holes to mount the controller, then drilled a bigger hole to thread the wires through. In my opinion it makes for a very clean install. Whilst drilling the larger hole I decided to hold the trim piece in my hand to drill the hole.....big mistake. Took a chunk outta my finger, quick phone call to my favorite nurse (see above), wrapped it up and pushed on. The brake and accelerator were much easier to get to and tapped very easily. (Kinda forgot to reconnect the accelerator plug and it got mad when I reconnected the battery). Cleaned up all the wiring, zip tide it outta the way, calibrated the unit and it works like a charm.

Sent from my VS995 using Tapatalk

dynosteve · 04-20-2017, 11:20 AM

enjoy sir they make the car alot more fun to drive for sure

KaBoom1701 · 04-28-2017, 12:39 PM

I highly recommend the auto blip as well. Works great at the track.

Andreas is great to work with. I ended up have Ofer install some OEM connectors to mine...made install much easier.

Easily saves 2 secs off lap times.

z28lt1 · 04-28-2017, 03:05 PM

Just got my install done yesterday. Little longer than I hoped (redid some of it to reroute the wires) and still haven't decided on final location for the unit yet, but it works fine in my garage. Almost 2 months to the next scheduled track day, so won't have a real report until then.

Wish I could say this wasn't needed, but I'm pretty inconsistent with the heel-toe in the Camaro (pedal position works much better for me in the Corvette, but even there, I'm not perfect), so I'm looking forward to it.

tylerio · 05-05-2017, 05:00 PM

Have done three track days now with the auto-blip. Works great!

Camaro Dude · 05-05-2017, 06:15 PM

Quote:

Originally Posted by KaBoom1701

.... I ended up have Ofer install some OEM connectors to mine...made install much easier...

I'm all down for plug n play.

Is this something to PM Ofer about as a custom order, or is there a link to a part number to order and checkout directly off his website?

I don't want to bother him with yet an other question, he is a busy man

.

Thinking about the Auto Blip, but I want mine all plug n play.

03-28-2017, 05:54 PM	#29
dynosteve Dyno Tuner & Calibrator Drives: 2010 SS Camaro Turbo Join Date: Oct 2009 Location: Painesville Ohio Posts: 12,196	How many AutoBlippers and track rats are going to be at Pitt-Race and Mid-Ohio with Chin Motorsports Memorial Day weekend this year? Would love to meet and greet up with as many of you as possible and if you need any tuning or anything else on site we would be more then happy to help __________________ RDP Store www.rdpstore.com Shop 440 358 5500 Cell 440 251 8571 *Kooks ARH Stainless Power ACT Aeroforce Kooks Husky AWE Gforce GForce SCT Edelbrock Whipple Magnuson Rotofab CAI Fore DSS Mishimoto Borla Magnaflow Corsa Trutrac EBC FIC*

04-02-2017, 09:11 AM	#30
dynosteve Dyno Tuner & Calibrator Drives: 2010 SS Camaro Turbo Join Date: Oct 2009 Location: Painesville Ohio Posts: 12,196	*Auto-Blip behind one of the best GM engines ever made the LS7....The Auto-Blip truly works so well* https://youtu.be/It8I-RMXCCw __________________ RDP Store www.rdpstore.com Shop 440 358 5500 Cell 440 251 8571 *Kooks ARH Stainless Power ACT Aeroforce Kooks Husky AWE Gforce GForce SCT Edelbrock Whipple Magnuson Rotofab CAI Fore DSS Mishimoto Borla Magnaflow Corsa Trutrac EBC FIC*

04-10-2017, 09:26 PM	#31
dynosteve Dyno Tuner & Calibrator Drives: 2010 SS Camaro Turbo Join Date: Oct 2009 Location: Painesville Ohio Posts: 12,196	Auto-Blip behind one of the best GM engines ever made the LS7....The Auto-Blip truly works so well https://youtu.be/It8I-RMXCCw __________________ RDP Store www.rdpstore.com Shop 440 358 5500 Cell 440 251 8571 *Kooks ARH Stainless Power ACT Aeroforce Kooks Husky AWE Gforce GForce SCT Edelbrock Whipple Magnuson Rotofab CAI Fore DSS Mishimoto Borla Magnaflow Corsa Trutrac EBC FIC*

04-11-2017, 04:29 AM	#32
tylerio EXTREMZ Drives: 2015 Z/28 #891, 2012 2SS 45th Anni Join Date: Jul 2012 Location: Southern Utah Posts: 133	I put one in my Z28 last week. Went to track yesterday. The thing worked perfectly. No more blown downshifts. Well, I should say fewer blown downshifts.. I did manage to "downshift" from 4th to 5th at one of the corners! __________________ ARH long tube headers, no cats Comp Cams stage 2 custom grind Ported throttle body JPSS Oil cooler JPSS SAI plates JPSS Rear sway bar Forza Continenti exhaust controller ZL1 Add-ons wickerbill Brey-Krause Harness bar Schroth 4 pt. ASM harnesses Auto-blip

04-12-2017, 11:23 PM	#34
Stephen12ZL1 Drives: '21 ZLE A10 '17 ZL1 A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,297	I am a huge proponent of the Auto Blip...I must have blipped on track 400 times in the last two days and it never misses a beat. I especially love to "double blip" in a braking zone. All you have to do is perfect the timing of your clutch pedal foot to your gear selector arm. __________________ '21 ZLE A10 Wild Cherry PDR '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

04-12-2017, 06:18 PM	#33
Superman09 Account SNAFU Drives: 13 Tahoe 79 Scout II 15 1LE Join Date: Sep 2008 Location: College Station, TX Posts: 1,361 View My Garage	Worked a couple extra jobs, made a little extra cash, ordered my auto blip. Can't wait for it to get here and try it out Sent from my VS995 using Tapatalk

04-18-2017, 04:53 PM	#35
Superman09 Account SNAFU Drives: 13 Tahoe 79 Scout II 15 1LE Join Date: Sep 2008 Location: College Station, TX Posts: 1,361 View My Garage	Ordered my auto-blip late on the 13th, fully expecting it to not ship until the 17th or 18th. But what does RDP do?????? They shipped it out literally first thing Friday morning and I received it before lunch on Monday. 2 day shipping over a holiday weekend. They could have easily phoned it in and not shipped it till this week but they didn't. RDP y'all rock, now to get this thing installed. Sent from my VS995 using Tapatalk

04-18-2017, 07:59 PM	#36
RLHMARINES 1st Civ. Div. Drives: Camaroless for now...RIP "Big SexZ" Join Date: Dec 2007 Location: Savannah, Ga Posts: 2,684	Post up picks on where you guys are installing your auto blip devices.....I need one for sure. __________________ Swift....Silent....Deadly

04-19-2017, 10:21 PM	#37
Superman09 Account SNAFU Drives: 13 Tahoe 79 Scout II 15 1LE Join Date: Sep 2008 Location: College Station, TX Posts: 1,361 View My Garage	Finally got it installed. Took me about 1.5 hours but that was with talking to the neighbors and a phone call to my mom (nurse.....more on that later). Both of my printers are outta ink so I was reading the instructions on my phone. Instructions are straight forward, very detailed, and easy to follow. I couldn't get my clutch sensor unplugged so I just traced the wires back, cut through the covering, and put the clips on there. Decided I would then mount the controller. I used the little trim piece to the left of the Speedo right above the air vent. Used the back plate as a template and drilled a couple small holes to mount the controller, then drilled a bigger hole to thread the wires through. In my opinion it makes for a very clean install. Whilst drilling the larger hole I decided to hold the trim piece in my hand to drill the hole.....big mistake. Took a chunk outta my finger, quick phone call to my favorite nurse (see above), wrapped it up and pushed on. The brake and accelerator were much easier to get to and tapped very easily. (Kinda forgot to reconnect the accelerator plug and it got mad when I reconnected the battery). Cleaned up all the wiring, zip tide it outta the way, calibrated the unit and it works like a charm. Sent from my VS995 using Tapatalk

04-20-2017, 11:20 AM	#38
dynosteve Dyno Tuner & Calibrator Drives: 2010 SS Camaro Turbo Join Date: Oct 2009 Location: Painesville Ohio Posts: 12,196	enjoy sir they make the car alot more fun to drive for sure __________________ RDP Store www.rdpstore.com Shop 440 358 5500 Cell 440 251 8571 *Kooks ARH Stainless Power ACT Aeroforce Kooks Husky AWE Gforce GForce SCT Edelbrock Whipple Magnuson Rotofab CAI Fore DSS Mishimoto Borla Magnaflow Corsa Trutrac EBC FIC*

04-28-2017, 12:39 PM	#39
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,482	I highly recommend the auto blip as well. Works great at the track. Andreas is great to work with. I ended up have Ofer install some OEM connectors to mine...made install much easier. Easily saves 2 secs off lap times. __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

04-28-2017, 03:05 PM	#40
z28lt1 Drives: 2014 ZL1 Join Date: Apr 2013 Location: Northern Virginia Posts: 278	Just got my install done yesterday. Little longer than I hoped (redid some of it to reroute the wires) and still haven't decided on final location for the unit yet, but it works fine in my garage. Almost 2 months to the next scheduled track day, so won't have a real report until then. Wish I could say this wasn't needed, but I'm pretty inconsistent with the heel-toe in the Camaro (pedal position works much better for me in the Corvette, but even there, I'm not perfect), so I'm looking forward to it.

05-05-2017, 05:00 PM	#41
tylerio EXTREMZ Drives: 2015 Z/28 #891, 2012 2SS 45th Anni Join Date: Jul 2012 Location: Southern Utah Posts: 133	Have done three track days now with the auto-blip. Works great! __________________ ARH long tube headers, no cats Comp Cams stage 2 custom grind Ported throttle body JPSS Oil cooler JPSS SAI plates JPSS Rear sway bar Forza Continenti exhaust controller ZL1 Add-ons wickerbill Brey-Krause Harness bar Schroth 4 pt. ASM harnesses Auto-blip