Charlotte/Triad folks--Interested in a dyno day at 3SX Performance in Concord, NC? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

topgun1 · 03-19-2010, 02:22 PM

please see this thread http://www.camaro5.com/forums/showthread.php?t=78278

Blade · 03-19-2010, 03:36 PM

Sure I am in

If my car is finished by the time this is schedule then I am out. I will probably have my car modded in 2 Fridays.

gwbates3 · 03-19-2010, 09:18 PM

bump

topgun1 · 03-24-2010, 09:02 PM

anyone else?

ukalumni93 · 03-26-2010, 07:48 PM

Count me in...

Bear2SS · 03-26-2010, 07:55 PM

I would be in assuming my mods are done by then...

topgun1 · 03-27-2010, 09:37 PM

alright, so we may possibly have 4 plus myself, which doesn't count since I won't have to pay for my next run. I was thinking about Friday May 7if we can get 7-8 or so cars plus mine. I'll ask him what number he would need so we can reserve times and get a discount.

I'd like to get some more interest if we can!

Blade · 03-28-2010, 01:01 AM

Quote:

Originally Posted by topgun1

alright, so we may possibly have 4 plus myself, which doesn't count since I won't have to pay for my next run. I was thinking about Friday May 7if we can get 7-8 or so cars plus mine. I'll ask him what number he would need so we can reserve times and get a discount.

I'd like to get some more interest if we can!

May 7th's cool.....would have to be some point in the afternoon though.

BTW what kind of dyno does he have? Mustang Dyno or Dynojet?

topgun1 · 03-28-2010, 02:03 PM

neither, it's a Superflow AutoDyn 880 all-wheel drive. check out their website http://www.3sx.com/dyno/default.asp

topgun1 · 03-30-2010, 11:04 AM

hey guys, below is the email I got from Chris Hill at 3SX. Looks like we may have 4 of us plus me. He'll take off $15 from the normal $90 for 3 wideband pulls if we have 4 and do it for $75. Doesn't appear we're going to get 8-10 cars. So if you guys are interested, I'll tell him Friday, May 7 say around 1 pm. If the weather is crappy, we may do a rain date.

Jeremy,

The more we can get at one time the lower the per car charge can be. For 4 cars I can make it $75 with wideband. For 8-10 I can make it $65 per car. I will run your car during that event at no charge.

Just let me know. The sooner the better to block off that day. We look forward to seeing you guys on the rollers!

Thank You,
Chris Hill
Service Manager
3SX Performance
www.3sx.com
704-784-3724

ukalumni93 · 03-30-2010, 11:58 AM

Sounds good to me. Just keep me informed of any changes.

Bear2SS · 03-30-2010, 03:44 PM

Good for me too. Marked my calendar!

topgun1 · 03-30-2010, 04:46 PM

awesome, hopefully we get our other 2 guys on board as well. I sent Chris an email to confirm the date. We're all set. This was his response:

Jeremy,

I have put you on the schedule for May 7th for the afternoon. Let me know if this needs to be changed. We look forward to seeing all you guys!

Thank You,
Chris Hill
Service Manager
3SX Performance
www.3sx.com
704-784-3724

gwbates3 · 03-31-2010, 09:16 PM

Interested, just not sure about work as many things have been popping up lately.
Can't commit this far out.

03-19-2010, 02:22 PM	#1
topgun1 Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008 Location: Winston-Salem, NC Posts: 1,940 View My Garage	please see updated thread...location changed please see this thread http://www.camaro5.com/forums/showthread.php?t=78278 __________________ 5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears.... Last edited by topgun1; 05-01-2010 at 08:54 PM.

03-19-2010, 03:36 PM	#2
Blade Drives: 2016 Camaro 2SS BVM Join Date: Dec 2009 Location: Charlotte Posts: 4,689 View My Garage	Sure I am in If my car is finished by the time this is schedule then I am out. I will probably have my car modded in 2 Fridays. __________________ Formerly owner of: 2012 2SS/RS Build Thread - Totaled by red light runner 2010 LT/RS Build Thread - Traded in for 2012 2SS 2007 Acura TSX 1992 Oldsmobile Achieva V6 1992 Mercury Sable

03-19-2010, 09:18 PM	#3
gwbates3 Ruby & Blu Imp Drives: 2010 LS3 2SSRS M6 & LLT RS A6 Join Date: Dec 2009 Location: Charlotte, NC Posts: 293	bump __________________ Ruby 2SSRS M6 - Blown & LLT RS A6

03-24-2010, 09:02 PM	#4
topgun1 Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008 Location: Winston-Salem, NC Posts: 1,940 View My Garage	anyone else? __________________ 5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears....

03-27-2010, 09:37 PM	#7
topgun1 Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008 Location: Winston-Salem, NC Posts: 1,940 View My Garage	alright, so we may possibly have 4 plus myself, which doesn't count since I won't have to pay for my next run. I was thinking about Friday May 7if we can get 7-8 or so cars plus mine. I'll ask him what number he would need so we can reserve times and get a discount. I'd like to get some more interest if we can! __________________ 5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears....

03-26-2010, 07:48 PM	#5
ukalumni93 Drives: 2010 Camaro 2SS Join Date: Mar 2010 Location: NC Posts: 61 View My Garage	Count me in...

03-26-2010, 07:55 PM	#6
Bear2SS Drives: Soon to be 2013 ZL1 Join Date: Sep 2009 Location: Charlotte, NC Posts: 149	I would be in assuming my mods are done by then...

03-28-2010, 02:03 PM	#9
topgun1 Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008 Location: Winston-Salem, NC Posts: 1,940 View My Garage	neither, it's a Superflow AutoDyn 880 all-wheel drive. check out their website http://www.3sx.com/dyno/default.asp __________________ 5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears....

03-30-2010, 11:04 AM	#10
topgun1 Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008 Location: Winston-Salem, NC Posts: 1,940 View My Garage	hey guys, below is the email I got from Chris Hill at 3SX. Looks like we may have 4 of us plus me. He'll take off $15 from the normal $90 for 3 wideband pulls if we have 4 and do it for $75. Doesn't appear we're going to get 8-10 cars. So if you guys are interested, I'll tell him Friday, May 7 say around 1 pm. If the weather is crappy, we may do a rain date. Jeremy, The more we can get at one time the lower the per car charge can be. For 4 cars I can make it $75 with wideband. For 8-10 I can make it $65 per car. I will run your car during that event at no charge. Just let me know. The sooner the better to block off that day. We look forward to seeing you guys on the rollers! Thank You, Chris Hill Service Manager 3SX Performance www.3sx.com 704-784-3724 __________________ 5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears....

03-30-2010, 11:58 AM	#11
ukalumni93 Drives: 2010 Camaro 2SS Join Date: Mar 2010 Location: NC Posts: 61 View My Garage	Sounds good to me. Just keep me informed of any changes.

03-30-2010, 03:44 PM	#12
Bear2SS Drives: Soon to be 2013 ZL1 Join Date: Sep 2009 Location: Charlotte, NC Posts: 149	Good for me too. Marked my calendar!

03-30-2010, 04:46 PM	#13
topgun1 Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008 Location: Winston-Salem, NC Posts: 1,940 View My Garage	awesome, hopefully we get our other 2 guys on board as well. I sent Chris an email to confirm the date. We're all set. This was his response: Jeremy, I have put you on the schedule for May 7th for the afternoon. Let me know if this needs to be changed. We look forward to seeing all you guys! Thank You, Chris Hill Service Manager 3SX Performance www.3sx.com 704-784-3724 __________________ 5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears....

03-31-2010, 09:16 PM	#14
gwbates3 Ruby & Blu Imp Drives: 2010 LS3 2SSRS M6 & LLT RS A6 Join Date: Dec 2009 Location: Charlotte, NC Posts: 293	Interested, just not sure about work as many things have been popping up lately. Can't commit this far out. __________________ Ruby 2SSRS M6 - Blown & LLT RS A6

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro on the dyno today in Concord, NC!	topgun1	Camaro Photos \| Spyshots \| Video \| Media Gallery	6	03-19-2010 06:49 PM
TSP 2010 Gathering & Dyno Day??? West Tx	Jason 98 TA	USA - Texas	2	01-10-2010 10:50 PM
2SS Silver Ice Metallic at ATL Car SHow	Cmurf_SS	Camaro Photos \| Spyshots \| Video \| Media Gallery	40	11-09-2009 09:38 PM
Anybody interested in a track day??	ZZcamaro	USA - NY / NJ / PA	5	09-20-2009 11:12 AM
Race Proven Motorsports Dyno Day June 13th!!!	Frans96ss	USA - NY / NJ / PA	1	06-11-2009 07:44 PM