Looking for digital toque wrench - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SS Performance · 11-06-2021, 06:54 PM

So my old torque wrench seems to be out of spec.

I'm thinging about replacing it with a digital torgue wrench that also does the angle (torque to yeild) setting.

I'm wondering what brands/models you guys might have used and what you thing of them.

Thanks
Craig

morepowerjoe · 11-12-2021, 03:56 AM

I got this one and absolutely love it.

https://www.amazon.com/GEARWRENCH-85...9K&srpt=WRENCH

ABM2SS · 11-12-2021, 06:35 AM

I have an AC Delco one that works really well. Only issue is it's limited to about 150 ft-lb.

I bought it because I thought my old click-style Torque Wrench was out of calibration. After I got the new one, I tested the old one by placing a bolt in my bench vise and tightening a nut on it with the old one wrench set at 80 ft-lb. Then I used the new one to check the torque on the nut. It was exactly at 80 ft-lb that it started turning. Oh well, I have two good Torque Wrenches now.

https://www.acdelco-tools.com/index....product_id=130

11-06-2021, 06:54 PM	#1
SS Performance Drives: 02 Camaro B4C Join Date: Nov 2016 Location: Cape May County NJ Posts: 750	Looking for digital toque wrench So my old torque wrench seems to be out of spec. I'm thinging about replacing it with a digital torgue wrench that also does the angle (torque to yeild) setting. I'm wondering what brands/models you guys might have used and what you thing of them. Thanks Craig __________________ A man's garage is his castle 1969 Camaro SS 1970 Camaro SS 2002 Camaro B4C 2014 Camaro SS Dedicated Track Car 2015 Camaro 1SS 1LE 2008 HHR SS 1996 Silverado Crew Cab Long Bed Dual Rear Wheel

11-12-2021, 03:56 AM	#2
morepowerjoe Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020 Location: Austin, TX Posts: 2,109	I got this one and absolutely love it. https://www.amazon.com/GEARWRENCH-85...9K&srpt=WRENCH __________________ DSS FX Forged Pistons, Eagle ESP L19 Forged Rods, ARP Head and Main Studs, TSP PRC 260 CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Performance Racing Lifters, CHE Trunnions , Molly Pushrods, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP 1 7/8" Longtubes with 3" TSP Exhaust, ZL1 Fuel Pump, Mishimoto Radiator, Mishimoto Oil Cooler, Tru Cool 40k Tranny Cooler, 3600 Circle D Converter, Fluid Dynamics Balancer Build Thread https://www.camaro5.com/forums/showthread.php?t=609817

11-12-2021, 06:35 AM	#3
ABM2SS Drives: 2010 SS M6 ABM Join Date: Mar 2015 Location: Nashville, IN Posts: 270	I have an AC Delco one that works really well. Only issue is it's limited to about 150 ft-lb. I bought it because I thought my old click-style Torque Wrench was out of calibration. After I got the new one, I tested the old one by placing a bolt in my bench vise and tightening a nut on it with the old one wrench set at 80 ft-lb. Then I used the new one to check the torque on the nut. It was exactly at 80 ft-lb that it started turning. Oh well, I have two good Torque Wrenches now. https://www.acdelco-tools.com/index....product_id=130