01-26-2017, 11:08 AM | #1 |
Drives: 2015 2ss Join Date: Jul 2015
Location: fonddulac wisconsin
Posts: 115
|
Sideskirts bowing
Has anyone had problems with the bottom of their OEM side skirts bowing on the bottom flat. Meaning the piece that is parallel to the ground drooping thus looking wavy? Heard of people bracing the bottoms of ground effects like these but don't know if the OEM skirts are strong enough that this doesn't happen? I have duraflex ones on my 15 ss and they are bad and want to buy the OEM ones if this will correct my problem. Thanks guys
|
01-26-2017, 11:10 AM | #2 |
Go fast, please.
|
I haven't seen this issue with my ZL1...
|
01-26-2017, 12:05 PM | #3 |
Let's go fishing!
Drives: a car with 8 cylinders Join Date: Apr 2016
Location: Seabrook, Texas
Posts: 1,129
|
Make sure the clips are not detached. Sometimes if the wife leans into the ZL1 and puts a lot of pressure on the skirt, the clip below will pop out a little... making the skirt look like it is sagging.
__________________
"When choosing between two evils, I always like to try the one I’ve never tried before." Mae West 1892-1980
|
01-26-2017, 12:09 PM | #4 |
bought my 2013 3 weeks ago and just noticed this.
Bringing it in tomorrow and hope they cover it free of charge. i have bumper to bumper CPO warranty |
|
01-26-2017, 12:16 PM | #5 |
Let's go fishing!
Drives: a car with 8 cylinders Join Date: Apr 2016
Location: Seabrook, Texas
Posts: 1,129
|
Was that a defect, or damaged while operating the vehicle?
__________________
"When choosing between two evils, I always like to try the one I’ve never tried before." Mae West 1892-1980
|
01-26-2017, 12:28 PM | #6 |
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
Has the been put on a dyno?
|
01-26-2017, 12:35 PM | #7 |
Go fast, please.
|
|
01-26-2017, 04:33 PM | #8 |
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
|
01-26-2017, 06:51 PM | #9 |
Drives: ZL1, 2013, tri-coat-red, manual Join Date: Nov 2013
Location: Michigan
Posts: 1,607
|
|
01-27-2017, 09:06 AM | #10 |
no clue how it happened (dyno or lift) because its a used car.
at dealer how. they come get me and say we can't see the problem. so i walk to shop and its on lift. and they supported it on the pinch welds! ughh and therefore pressing in the broken tab/valance hiding the issue. i asked nicely not to support my car that way |
|
01-27-2017, 09:21 AM | #11 |
Drives: LSX FTW Join Date: Feb 2016
Location: Florida
Posts: 526
|
Did they take car of that for you? if not try zip tying it up. my buddy had the same thing happen to his
__________________
#Gapped
|
01-27-2017, 10:19 AM | #12 |
KaBoom1701
Drives: 13' ZL1 Red M6 Join Date: Dec 2012
Location: I.E. SoCal (Yucaipa)
Posts: 8,630
|
Simple fix with some clips. They are a pain in the ass to replace but doable.
__________________
Mods:
Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats. |
01-27-2017, 10:24 AM | #13 |
they are replacing all the clips now...
don't know yet if i will have to fight to get it covered under warranty since i just got it from them 3 weeks ago... |
|
01-27-2017, 10:28 AM | #14 |
Drives: 2002 Camaro SS SOM; 2015 Malibu LTZ Join Date: Dec 2010
Location: Queens, NY
Posts: 4,022
|
Great...now that makes both of my Camaros that I have to supervise being lifted. Joy......(not).
__________________
'02 CAMARO SS SOM; 5.7L LS1/FLS6B
'08 TBSS AWD Black Granite Metallic '15 Malibu LTZ 2LZ Turbo '14 CAMARO ZL1 Blue Ray Metallic |
|
|
|
|