LED Sequential Tail Lights - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TX_ED_SS · 01-21-2017, 08:36 AM

Santa brought me a great Christmas present this year! Install was pretty. Just plug & play once the stock lights are removed. My daughter was the one taking the video so I apologize for the shaking and funny noises.

https://drive.google.com/file/d/0B9D...ew?usp=sharing

BossRS4 · 01-21-2017, 09:24 AM

Those look awesome! Where did you get them?

witenite · 01-21-2017, 10:06 AM

Looks good

TX_ED_SS · 01-21-2017, 10:37 AM

Quote:

Originally Posted by BossRS4

Those look awesome! Where did you get them?

Pretty sure my wife picked them up from Amazon. There are also some available from a few sellers on ebay. Here's a link to some exactly like I have.

http://www.ebay.com/itm/2010-2013-CH...JXYfcs&vxp=mtr

Muscle SS · 03-27-2017, 12:08 PM

How are these holding up? Still love them?

TheFlyingBananaSS · 03-27-2017, 03:01 PM

I just ordered a set but with the chrome housing and red lens instead of the black housing and clear lens.

Fingers crossed

TX_ED_SS · 03-27-2017, 09:06 PM

I've had mine installed since the end of Dec and they are still working great!

Sent from my iPhone using Tapatalk

TheFlyingBananaSS · 03-31-2017, 09:55 AM

Mine just got here today. Due to work hours I have to wait until Saturday evening to install and test.

mpsgolf · 03-31-2017, 10:00 AM

There's also a plug in wire harness out there for use with existing tail lights.

Here's one.
https://www.phastekperformance.com/2...signal-2.0.htm

TheFlyingBananaSS · 04-01-2017, 05:57 PM

I installed mine today. Probably the most bang for buck mod I've done so far. These lights look amazing. Took one hour to install and put away tools.

TheFlyingBananaSS · 04-03-2017, 12:22 PM

*UPDATE* It's only been a few days and the left side is already hyper-blinking.

I've tried to contact the seller with no luck. Looks like I will be using ebays money back guarantee.

I suggest not getting them.

davesnever · 04-04-2017, 01:22 PM

Either a loose connection or resistors need to be added if they are actually led, I added a sequential flasher harness to mine but still using the factory bulbs.I had hyper flashing the first couple days until I fixed loose connection.

TX_ED_SS · 04-05-2017, 01:35 PM

Flying Banana,

I'm on my phone and it's difficult to go back through the thread. Which lights did you get? If they are hyper blinking, then it sounds like a resistor is bad. I hope the seller gets back with you to make things right.

Sent from my iPhone using Tapatalk

TheFlyingBananaSS · 04-05-2017, 09:12 PM

I got the same lights that the op got. I might try fixing them this weekend but the seller is definitely getting poor feedback for shipping defective product.

01-21-2017, 08:36 AM	#1
TX_ED_SS Drives: 2010 2SS/RS Inferno Orange Join Date: Mar 2013 Location: San Antonio, TX Posts: 628	LED Sequential Tail Lights Santa brought me a great Christmas present this year! Install was pretty. Just plug & play once the stock lights are removed. My daughter was the one taking the video so I apologize for the shaking and funny noises. https://drive.google.com/file/d/0B9D...ew?usp=sharing __________________ U.S. Army Retired

01-21-2017, 09:24 AM	#2
BossRS4 Drives: 2013 Camaro ZL1 Join Date: Sep 2013 Location: Grand Rapids, MI Posts: 228	Those look awesome! Where did you get them? __________________ 2013 Yellow Camaro ZL1 Purchased: (9/24/16) 5% Tint All Around 45% Tint on Windshield Roto-Fab Cold Air Intake Oracle Afterburner Tail Lights Oracle LED Sidemarkers RDP Tune TSP Long Tube Headers Forza Componenti 3-Way Exhaust Controller ZL1 Addons Wicker Bill

03-27-2017, 12:08 PM	#5
Muscle SS All blackkk Drives: 2010 2SS/RS LS3 Join Date: Oct 2011 Location: Albany, NY Posts: 871	How are these holding up? Still love them? __________________ Drivin it like I stole it.

03-27-2017, 03:01 PM	#6
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,260	I just ordered a set but with the chrome housing and red lens instead of the black housing and clear lens. Fingers crossed __________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.

03-27-2017, 09:06 PM	#7
TX_ED_SS Drives: 2010 2SS/RS Inferno Orange Join Date: Mar 2013 Location: San Antonio, TX Posts: 628	I've had mine installed since the end of Dec and they are still working great! Sent from my iPhone using Tapatalk __________________ U.S. Army Retired

01-21-2017, 10:06 AM	#3
witenite Drives: 2010 2SS non RS Join Date: May 2014 Location: Virginia Posts: 3,253 View My Garage	Looks good

03-31-2017, 09:55 AM	#8
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,260	Mine just got here today. Due to work hours I have to wait until Saturday evening to install and test. __________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.

03-31-2017, 10:00 AM	#9
mpsgolf Drives: 2012 Camaro SS Transformer Join Date: Sep 2013 Location: St Louis Missouri Posts: 501	There's also a plug in wire harness out there for use with existing tail lights. Here's one. https://www.phastekperformance.com/2...signal-2.0.htm __________________ 2012 Camaro SS Transformer Mods: trunk subwoofer and amp, LED lighting (fogs, interior, trunk), skip shift eliminator, CAI cold air kit, Vmax ported throttle body, Stainless Works retro chambered cat back, JBA Cat4ward SS ceramic coated headers Potential Next Mods: Tune, F&R sway bars, rear cradle bushing inserts and trailing arms Last edited by mpsgolf; 03-31-2017 at 10:39 AM.

04-01-2017, 05:57 PM	#10
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,260	I installed mine today. Probably the most bang for buck mod I've done so far. These lights look amazing. Took one hour to install and put away tools. __________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.

04-03-2017, 12:22 PM	#11
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,260	UPDATE It's only been a few days and the left side is already hyper-blinking. I've tried to contact the seller with no luck. Looks like I will be using ebays money back guarantee. I suggest not getting them. __________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.

04-04-2017, 01:22 PM	#12
davesnever Drives: 2010 Camaro 2SS Join Date: Sep 2015 Location: Richmond Hill ,Ontario, Canada Posts: 780 View My Garage	Either a loose connection or resistors need to be added if they are actually led, I added a sequential flasher harness to mine but still using the factory bulbs.I had hyper flashing the first couple days until I fixed loose connection.

04-05-2017, 01:35 PM	#13
TX_ED_SS Drives: 2010 2SS/RS Inferno Orange Join Date: Mar 2013 Location: San Antonio, TX Posts: 628	Flying Banana, I'm on my phone and it's difficult to go back through the thread. Which lights did you get? If they are hyper blinking, then it sounds like a resistor is bad. I hope the seller gets back with you to make things right. Sent from my iPhone using Tapatalk __________________ U.S. Army Retired

04-05-2017, 09:12 PM	#14
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,260	I got the same lights that the op got. I might try fixing them this weekend but the seller is definitely getting poor feedback for shipping defective product. __________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.