Overkill 80mm Throttle Body - Page 13 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Kenny Camaro · 12-05-2016, 06:28 PM

Quote:

Originally Posted by killercamaro23

I also have the cold air inductions intake with a ported manifold and intake for the 80mm TB.. I hope its not Trifecta that has the problems.... when you guys got the 80mm TB was it by UPS or USPS ?

It was usps. Camrytt had a local tuner in North Caralina, it was not trifecta. Where did you get you mani ported for the 80?

killercamaro23 · 12-05-2016, 06:52 PM

Quote:

Originally Posted by Kenny Camaro

It was usps. Camrytt had a local tuner in North Caralina, it was not trifecta. Where did you get you mani ported for the 80?

JacFab

his name is Jason and he's a really cool dude.

Chantro5 · 12-05-2016, 07:02 PM

Quote:

Originally Posted by killercamaro23

I ordered my TB on the 25th of November and still haven't gotten it. I have emailed Will to see if there was any tracking and no response. If you don't mind me asking, how many days after did you receive yours after you purchased it ? thanks

Took a couple of weeks. Give a min and I'll give you an exact time period.

willoverkill · 12-06-2016, 01:55 AM

killercamaro23, your throttle body is on its way, look for it at the end of this week. I emailed you tracking info this evening. Your order was processed in 4 business days and it takes about 6-8 business days in UPS' hands to get to the south east from here, so Kenny's timeframe is about right, plus another day or two compared to reaching Michigan.

Steven yours is on its way too, with the CAI elbow, look for it later this week.

willoverkill · 12-06-2016, 02:02 AM

If anyone needs their 80mm faster in future, I'll add an expedited shipping option to the website, it's a $45 premium in shipping cost ($75 total) but turns UPS transit time into a 1-2 day affair. I always en devour to have kits in stock and the vast majority of the time I do, takes 2-4 days to process and ship.

willoverkill · 12-06-2016, 02:05 AM

This is the newest 80mm kits that are shipping since Black Friday. Biggest change is the addition of an O-ring to seal to the throttle body, no sealant required anymore! The throttle body rotation is also milder, due to the overwhelming preference for asthetic purposes.

sspade · 12-06-2016, 03:02 AM

Thanks Will !

TX12Camaro · 12-06-2016, 10:47 AM

Looks great Will. How do I order one from you -- with the Injen CAI elbow.

Thanks!

Kenny Camaro · 12-06-2016, 04:20 PM

Quote:

Originally Posted by TX12Camaro

Looks great Will. How do I order one from you -- with the Injen CAI elbow.

Thanks!

Go to the Overkill website. There's a drop down menu to order the silicon elbow you will need for your cold air system.

VanillaE · 12-08-2016, 08:13 PM

I installed the 80mm tb today and I skipped the step of sealing it with the gasket maker . I will do that this weekend . But is that the problem or could it be something else ?

Kenny Camaro · 12-08-2016, 08:19 PM

Ya gotta seal it dude! Air leak is not good

VanillaE · 12-08-2016, 08:21 PM

Quote:

Originally Posted by Kenny Camaro

Ya gotta seal it dude! Air leak is not good

Quick question do I spread around the outside or actually in between the tb and adapter ?

Jason@JacFab · 12-08-2016, 08:26 PM

Quote:

Originally Posted by VanillaE

Quick question do I spread around the outside or actually in between the tb and adapter ?

Between

Sent from my iPhone using Tapatalk

Kenny Camaro · 12-08-2016, 08:31 PM

Take the bolts out of the TB, make sure the the face of the spacer and the TB are clean. I would clean the surface with alcohol, not beer! Haha. Just use a little and spread it around while wearing a latex or nitrile glove. After bolting the TB back on, use a clean rag or paper towel and reach
in the throttlebody and wipe any sealant that gets inside the TB off before it get set or hardens.

12-06-2016, 03:02 AM	#175
sspade Drives: 2015 Camaro LFX A6 Join Date: Nov 2015 Location: Elk Grove, CA Posts: 675	Thanks Will ! __________________ Cold Air Inductions CAI : Apex Air Scoop / WW Relocate Kit : JacFab Intake Manifold Spacer : Overkill 80mm Throttle Body : Overkill Tuned : MagnaFlow Cat-Back Exhaust : Elite Engineering Catch Can : ZL1 Strut Tower Brace : Custom Tunnel Brace : JPSS Caster Locks : JPSS 32mm Rear Sway Bar : JPSS Billet Radius Arm Bushings : Pegasus Solid Sub Frame Bushings : 1LE Brembo Conversion : B&M 70273 Trans Cooler

12-06-2016, 10:47 AM	#176
TX12Camaro Drives: 2022 Cheverolet Camaro RS V6 Join Date: Nov 2016 Location: DFW Posts: 57	Looks great Will. How do I order one from you -- with the Injen CAI elbow. Thanks! __________________ Tx12Camaro 2022 Camaro V6 1LT RS

12-08-2016, 08:13 PM	#178
VanillaE Drives: Black 2010 Camaro SS Join Date: Nov 2016 Location: Florida Posts: 28	CEL came one I installed the 80mm tb today and I skipped the step of sealing it with the gasket maker . I will do that this weekend . But is that the problem or could it be something else ?

12-06-2016, 01:55 AM	#172
willoverkill Drives: Fast Join Date: Dec 2012 Location: Nanaimo BC Posts: 220	killercamaro23, your throttle body is on its way, look for it at the end of this week. I emailed you tracking info this evening. Your order was processed in 4 business days and it takes about 6-8 business days in UPS' hands to get to the south east from here, so Kenny's timeframe is about right, plus another day or two compared to reaching Michigan. Steven yours is on its way too, with the CAI elbow, look for it later this week.

12-06-2016, 02:02 AM	#173
willoverkill Drives: Fast Join Date: Dec 2012 Location: Nanaimo BC Posts: 220	If anyone needs their 80mm faster in future, I'll add an expedited shipping option to the website, it's a $45 premium in shipping cost ($75 total) but turns UPS transit time into a 1-2 day affair. I always en devour to have kits in stock and the vast majority of the time I do, takes 2-4 days to process and ship.

12-06-2016, 02:05 AM	#174
willoverkill Drives: Fast Join Date: Dec 2012 Location: Nanaimo BC Posts: 220	This is the newest 80mm kits that are shipping since Black Friday. Biggest change is the addition of an O-ring to seal to the throttle body, no sealant required anymore! The throttle body rotation is also milder, due to the overwhelming preference for asthetic purposes.

12-08-2016, 08:19 PM	#179
Kenny Camaro Account Suspended Drives: 2013 1LT RS Camaro Join Date: Apr 2016 Location: Southeast Michigan Posts: 3,494	Ya gotta seal it dude! Air leak is not good

12-08-2016, 08:31 PM	#182
Kenny Camaro Account Suspended Drives: 2013 1LT RS Camaro Join Date: Apr 2016 Location: Southeast Michigan Posts: 3,494	Take the bolts out of the TB, make sure the the face of the spacer and the TB are clean. I would clean the surface with alcohol, not beer! Haha. Just use a little and spread it around while wearing a latex or nitrile glove. After bolting the TB back on, use a clean rag or paper towel and reach in the throttlebody and wipe any sealant that gets inside the TB off before it get set or hardens.