Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Wheels and Tires Talk Sponsored by The Tire Rack


Reply
 
Thread Tools
Old 08-02-2020, 08:09 PM   #1
LS3_JC
 
LS3_JC's Avatar
 
Drives: 12í Chevy camaro SS 6MT
Join Date: Jul 2020
Location: Florida
Posts: 5
Will 20x10 ET23 wheels fit

So Iíve been looking to buy a new set of wheels and found the factory reproductions 27 (z28 replicas), there are 2 options for offset: +35 and +23. Iím trying to make the wheels go flush with the fender. If it helps My car is a 2012 Camaro SS with the stock Brembos, stock Suspension (gonna go with coilovers) soon). Also the full specs for the wheels are: 20x10 ,ET+23 ,5x120.65 ,66.9. Same for the other ones except itís a +35 offset.
LS3_JC is offline   Reply With Quote
Old 08-02-2020, 10:20 PM   #2
Athletics101
 
Athletics101's Avatar
 
Drives: 5th Gen L99
Join Date: Nov 2017
Location: Lake Havasu City
Posts: 244
20x10 +35 can fit on all 4 corners, tho I haven’t done it. It’s a size guys run with the TSW’s. I know certainly that a 10 inch wide wheel with 35mm offset sits flush in the rear as that’s my current set up on my radials.
__________________
LSA conversion 2.5 upper 10% lower, L99 converted to LS3. TSP 229/244 cam, TSP LS3 ported and milled heads milled .015,Kooks LTís no cats, Roto Fab, Borla arak cat back. 3200 stall,Forgestar F14 18ís and drag radials, pedders coil overs, BMR trailing arms & adjustable toe rods, mildly stripped Interior 685/613 on E 610/571 on 91

Last edited by Athletics101; 08-02-2020 at 11:06 PM.
Athletics101 is offline   Reply With Quote
Old 08-02-2020, 10:40 PM   #3
LS3_JC
 
LS3_JC's Avatar
 
Drives: 12í Chevy camaro SS 6MT
Join Date: Jul 2020
Location: Florida
Posts: 5
Also will the 5x120.65 bolt pattern fit?
LS3_JC is offline   Reply With Quote
Old 08-02-2020, 11:13 PM   #4
Athletics101
 
Athletics101's Avatar
 
Drives: 5th Gen L99
Join Date: Nov 2017
Location: Lake Havasu City
Posts: 244
Quote:
Originally Posted by LS3_JC View Post
Also will the 5x120.65 bolt pattern fit?
Absolutely.
__________________
LSA conversion 2.5 upper 10% lower, L99 converted to LS3. TSP 229/244 cam, TSP LS3 ported and milled heads milled .015,Kooks LTís no cats, Roto Fab, Borla arak cat back. 3200 stall,Forgestar F14 18ís and drag radials, pedders coil overs, BMR trailing arms & adjustable toe rods, mildly stripped Interior 685/613 on E 610/571 on 91
Athletics101 is offline   Reply With Quote
Old 08-02-2020, 11:22 PM   #5
Vegas Bound
Account Suspended
 
Drives: 2013 Sparkly Red One
Join Date: Dec 2018
Location: Hospitality State
Posts: 2,569
0.65 is 26/1000 of an inch.
Vegas Bound is offline   Reply With Quote
Old 08-03-2020, 07:34 AM   #6
steakmaker
 
steakmaker's Avatar
 
Drives: '10 Camaro SS,Jeep Commander Hemi
Join Date: Mar 2010
Location: Cicero,NY
Posts: 552
I had a square set 20x10 +34 no problem,until they got stolen that is!
steakmaker is offline   Reply With Quote
Old 08-12-2020, 04:19 PM   #7
SSkat
 
SSkat's Avatar
 
Drives: 2010 Camaro 2SS
Join Date: Mar 2018
Location: Pensacola, FL
Posts: 243
I ran a 20x10 +25 squared with 275/315 tires and it fit fine with no spacers or anything. It poked a little but not much. I liked it better in the rear more than my current 20x11 +43.
SSkat is offline   Reply With Quote
Old 08-12-2020, 05:20 PM   #8
SSEssence
Instagram: Sangstah
 
SSEssence's Avatar
 
Drives: 2014 Camaro 1SS RS SIM
Join Date: Sep 2016
Location: Buena Park, CA.
Posts: 2,453
I'm running 20x10 +25 up front w no issues or rubbing.
__________________
2014 SS - BTR Stg 2 Cammed L99 1SS/RS FBO - "AleSSandra"
SSEssence is offline   Reply With Quote
Old 09-14-2020, 09:18 PM   #9
jksynergy

 
jksynergy's Avatar
 
Drives: 11 SW SYNERGY SERIES/14 1SS 1LE
Join Date: May 2012
Location: Missouri
Posts: 1,210
Yes, they will fit.
Both of these sets are 20x10. Gray wheels are et +35. The polished and brushed set is et +20. The bolt pattern you are looking at is for a Corvette but I believe it may not fit the Camaro also. No promises though.

Sent from my SM-T377T using Tapatalk
__________________
2011 Summit White Synergy Series Edition, the hot innocent woman named Ava that we show off around town, dressed in white complete with angel's wings. Sold, but never forgotten.

2014 1SS 1LE. Bama, sporting Red Rock Metallic demon's horns, when we are ready to get naughty and open a can of whoopass! Airaid, Spectre, Xpel,Bowler shifter Peddars, UMI, Ult Perf. Diode Dynamics, JRE Tune, XS Power battery,
Hooker Headers Blackheart exhaust,Powerbrake
InstaGram & Twitter: @jlouie62
FB: hangtimeracing

Last edited by jksynergy; 09-15-2020 at 01:02 PM.
jksynergy is offline   Reply With Quote
Old 09-15-2020, 05:37 AM   #10
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,549
Quote:
Originally Posted by Athletics101 View Post
Absolutely.
Do not use 5x120.65mm bolt circle wheels on a 5th gen Camaro. You will stress the studs and not tighten the wheel correctly. Correct bolt circle is 5x120mm. 5x120.65mm bolt circle is the old small Chevy 4.75x5 bolt circle.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
flht99b is offline   Reply With Quote
Old 09-15-2020, 06:03 AM   #11
Deputy347k9

 
Deputy347k9's Avatar
 
Drives: 2014 Ashen Gray Convertible
Join Date: Apr 2017
Location: Havelock, NC
Posts: 1,326
Choose Chevrolet Camaro model with 5X120.65 PCD
Chevrolet Camaro models that are suitable for a 5X120.65 bolt pattern.

Search by Chevrolet Camaro modification
search
Camaro 3.8 IV Restyling (1998-2002)
Camaro 5.7 IV Restyling (1998-2002)
Camaro 5.7 SS IV Restyling (1998-2002)
Camaro 3.4 IV (1993-1995)
Camaro 5.7 IV (1993-1997)
Camaro 3.8 IV (1995-1997)
Camaro 5.7 SS IV (1996-1997)
Camaro All trims III (1982-1992)
Camaro All trims II (1970-1981)
Camaro All trims I (1967-1969)

This spacing will fit many other Chevrolet models, however all are early models, some going back to 1955!

As just previously stated, "stay away from them unless you want trouble", they might go on but they might also cause serious and dangerous damage.
__________________
Deputy347k9 is offline   Reply With Quote
Old 09-15-2020, 07:18 AM   #12
SSammy
 
SSammy's Avatar
 
Drives: 2015 2SS A6 Commemorative Edition
Join Date: Nov 2019
Location: Utah
Posts: 334
Mine are 20x10 +35 MRR228 with 275/40zr20 all 4 corners. Originally installed at stock height and now on 1” BMR drop springs. No problems or rubbing either way.
SSammy is offline   Reply With Quote
Old 09-15-2020, 10:27 AM   #13
Avenging Orange


 
Avenging Orange's Avatar
 
Drives: 2010 Inferno Orange 2SS/RS
Join Date: Apr 2010
Location: Clermont, IN
Posts: 3,298
The offsets are correct for stock stagger. +35 rear and +23 front for a 10" wheel....which should put them flush.
I have 20x9 square at +30 and added 5mm spacer to the fronts to get them to a +25. Both fit perfectly flush with the fender. If you are still confused, call one of our wheel sponsors. I talked at length with Akio @ PK Auto Design, he really helped me understand offsets and back spacing and how it applied to different wheel widths.
__________________
2010 Inferno Orange 2SS/RS M6 Black Leather, Sun Roof, OBX Headers, Borla touring axle back, Cold Air Inductions CAI , non synthetic fluids, BMR total bushing upgrade/1" lowering springs, DSE 32mm rear sway bar. GM fe4 shocks/struts/LCA's, AAM 3.91 diff, Vertini RFS1.8 20x9 +30. Conti ExtremeContact Sport 275/35/20. sjm autoprod ABL dash kit. Mike Norris tuned 413/419.
Avenging Orange: 43 years of not buying into the Hype........and damn proud of it!!
https://youtu.be/9JD9it6SmB8
https://youtu.be/xmelTlEzI34
KICKING CANCERS ASS SINCE 2015!!
Avenging Orange is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:52 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2021, vBulletin Solutions, Inc.