You are browsing camaro5 
 |
|
03-22-2021, 08:20 AM
|
#1 |
 Drives: 2012 Camaro 1lt Join Date: Jul 2018
Location: Baltimore
Posts: 2
|
V6 Brake Caliper Bolts
It's time to replace my brake pads again. Last time, i ordered what i thought were the correct brake caliper bolts, but they seemed to be either for the SS or ZL1. I checked RockAuto, but they only show the front brake caliper bolts, no rears. Are the front and rear caliper bolts the same size?
|
|
|
|
03-23-2021, 09:37 AM
|
#2 |
 
Drives: 2014 Camaro 1LT Join Date: Aug 2019
Location: Southern Indiana
Posts: 254
|
The mounting bracket bolts? I'm fairly certain that they're the same, but don't quote me. I looked through my chilton manual, and it doesn't give exact specifications on the bolts, but rather the torque specs (and they're the same for front and back mounting bracket bolts)
|
|
|
|
|
03-23-2021, 09:54 AM
|
#3 |
 Drives: 2011 Camaro 2LT Join Date: Oct 2018
Location: Az
Posts: 327
|
Here’s the part number for a V6 rear: 89027183. If you paste the part number in Rock Auto’s search field, they do stock them for $7.69.
|
|
|
|
|
03-23-2021, 10:02 AM
|
#4 | |
|
Drives: 2014 Camaro 1LT Join Date: Aug 2019
Location: Southern Indiana
Posts: 254
|
Quote:
Those are the caliper slide pin bolts rather than the mounting bracket bolts. A lot of guys get those confused, including yours truly. |
|
|
|
|
|
03-23-2021, 10:46 AM
|
#5 |
|
Drives: 2012 Camaro 1lt Join Date: Jul 2018
Location: Baltimore
Posts: 2
|
Sorry for the confusion. I'm looking for the caliper bracket bolts. I'm pretty sure the rear bolts are the same as the fronts as well. Thanks everyone
|
|
|
|
|
03-23-2021, 12:44 PM
|
#6 |
  Drives: 2015 Z/22 Join Date: Aug 2015
Location: Ontario, Canada
Posts: 865
|
Caliper bracket bolts are the same front and rear. I priced them out at the dealer and was quoted around $20 each lolol so I just used Loc-tite and a grunt or two and so far so good - been a year and the brakes haven't fallen off yet.
__________________
Overkill Tuned; K&N Typhoon Cold Air Intake; Ported 80mm Throttle Body/Intake Manifolds/Manifold Spacer; Solo Performance High-Flow Cats, Cat-back Exhaust; Vitesse Motorsports Throttle Controller; Elite Engineering E2 Catch Can; BC Racing BR Coilovers; JPSS Delrin Radius Rod Bushing Inserts, Sway Bars; Pegasus Aluminum Rear Cradle Bushings, Camber/Caster Plates; Z/28 Toe Links, Trailing Arms, Upper Control Arm Bushings, Rear Shock Mounts
|
|
|
|
|
03-23-2021, 01:53 PM
|
#7 |
        Drives: LT W/2LT,blue metallic Join Date: Jul 2016
Location: central florida
Posts: 4,417
|
good to know.i cant imagine 80 bucks worth of bolts to work on my brakes.
|
|
|
|
|
03-24-2021, 06:00 AM
|
#8 | |
|
Drives: 2015 Z/22 Join Date: Aug 2015
Location: Ontario, Canada
Posts: 865
|
Quote:
 Can't believe dealers are allowed to charge what they do for some parts - I was quote $300 (plus tax) for one headlight (RS) bulb! If you priced out the whole car at dealer prices these cars would cost you half a mill.
__________________
Overkill Tuned; K&N Typhoon Cold Air Intake; Ported 80mm Throttle Body/Intake Manifolds/Manifold Spacer; Solo Performance High-Flow Cats, Cat-back Exhaust; Vitesse Motorsports Throttle Controller; Elite Engineering E2 Catch Can; BC Racing BR Coilovers; JPSS Delrin Radius Rod Bushing Inserts, Sway Bars; Pegasus Aluminum Rear Cradle Bushings, Camber/Caster Plates; Z/28 Toe Links, Trailing Arms, Upper Control Arm Bushings, Rear Shock Mounts
|
|
|
|
|
|
03-24-2021, 12:30 PM
|
#9 | |
|
Drives: 2014 Camaro 1LT Join Date: Aug 2019
Location: Southern Indiana
Posts: 254
|
Quote:
Those guys must be out their ever loving minds for charging $20/bolt. |
|
|
|
|
|
03-24-2021, 12:54 PM
|
#10 |
|
Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017
Location: Huntsville, AL
Posts: 1,361
|
I think Dorman 14947 will work. About $7 a pair at Autozone, Advance Auto.
|
|
|
|
03-24-2021, 02:53 PM
|
#11 |
|
Drives: 2014 Camaro LS / 13 zl1 Join Date: May 2016
Location: Hayes , Va.
Posts: 355
|
Screaming Chicken may have them.
|
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
