Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
JUICEDMOTORSPORTS
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 03-26-2017, 01:15 AM   #15
RealQuick
 
Drives: 2010 Camaro 2SS M6 - Intake/Exhaust
Join Date: Sep 2014
Location: Bridgewater
Posts: 578
If it is not too late I would step up to ID1000 injectors.
RealQuick is offline   Reply With Quote
Old 03-27-2017, 04:32 AM   #16
racesloth
Dan
 
Drives: 2010 Camaro 2SS IOM
Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 862
I started hand porting the LSA heads last night. I am not looking to make gains near a CNC port, just a good clean up (remove rocker stud buldge, swirl dam, soften chamber, polish and port match. Stock LSA heads flow 290cfm at .600 lift and stock LS3 are around 310cfm at the same lift. So it I can get the homeported LSA heads to 320-330 I will call it a day. Putting the LSA heads on just to take advange of the stronger casting and use higher quality valvetrain parts.

I will let the YSi push the air through...
__________________
Dan

2010 IOM SS
YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust
http://www.camaro5.com/forums/showth...&highlight=ysi

Last edited by racesloth; 05-08-2017 at 07:34 AM.
racesloth is offline   Reply With Quote
Old 03-27-2017, 10:14 AM   #17
racesloth
Dan
 
Drives: 2010 Camaro 2SS IOM
Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 862
Steped up to ID1050X injectors...
__________________
Dan

2010 IOM SS
YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust
http://www.camaro5.com/forums/showth...&highlight=ysi
racesloth is offline   Reply With Quote
Old 03-27-2017, 10:31 PM   #18
RealQuick
 
Drives: 2010 Camaro 2SS M6 - Intake/Exhaust
Join Date: Sep 2014
Location: Bridgewater
Posts: 578
Quote:
Originally Posted by racesloth View Post
Steped up to ID1050X injectors...
Good move!
RealQuick is offline   Reply With Quote
Old 03-28-2017, 02:31 AM   #19
racesloth
Dan
 
Drives: 2010 Camaro 2SS IOM
Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 862
and it was only $126 more...
__________________
Dan

2010 IOM SS
YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust
http://www.camaro5.com/forums/showth...&highlight=ysi
racesloth is offline   Reply With Quote
Old 04-04-2017, 04:38 AM   #20
racesloth
Dan
 
Drives: 2010 Camaro 2SS IOM
Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 862
Meth kit is ordered.

Great working with Rodney at PROMETH. The Camaro stage II kit with stainless hard and soft lines, and progressive controller is on its way.

__________________
Dan

2010 IOM SS
YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust
http://www.camaro5.com/forums/showth...&highlight=ysi
racesloth is offline   Reply With Quote
Old 04-14-2017, 07:32 AM   #21
Dirtdog
Pro Hide n Seek Player
 
Dirtdog's Avatar
 
Drives: 2010 SS LS3/LSA 620whp/630tq
Join Date: May 2009
Location: Tucson, AZ
Posts: 922
Send a message via AIM to Dirtdog
Quote:
Originally Posted by racesloth View Post
Steped up to ID1050X injectors...
def great move. now you can handle e85!
__________________

620whp/630wtq. ADM LSA Conversion, E85, PFADT Tri-Y Headers into Borla S, PFADT Swaybars, Springs, Links, 20x10 20x11 Forgestar F14s, Lots of AAC
Dirtdog is offline   Reply With Quote
Old 04-17-2017, 05:54 PM   #22
SarGar
 
Drives: '13 BRM ZL1
Join Date: Apr 2016
Location: Cheyenne WY
Posts: 40
OP - are you happy with the ID1050x? Wasn't sure what the main difference was from the 1000's.
SarGar is offline   Reply With Quote
Old 04-18-2017, 03:31 AM   #23
racesloth
Dan
 
Drives: 2010 Camaro 2SS IOM
Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 862
Not happy yet - don't have anything yet....waiting...

From what I understang the 1000's are taller...
__________________
Dan

2010 IOM SS
YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust
http://www.camaro5.com/forums/showth...&highlight=ysi
racesloth is offline   Reply With Quote
Old 04-18-2017, 07:34 AM   #24
jeff657756
 
Drives: 2014 SS 1LE
Join Date: Apr 2014
Location: United States
Posts: 610
Quote:
Originally Posted by SarGar View Post
OP - are you happy with the ID1050x? Wasn't sure what the main difference was from the 1000's.
I have 1050x and they are fine. The ID1000s are not a direct fit and are taller.
__________________
jeff657756 is offline   Reply With Quote
Old 04-21-2017, 05:55 AM   #25
racesloth
Dan
 
Drives: 2010 Camaro 2SS IOM
Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 862
My YSi and supporting parts are in and supposed to ship today!
__________________
Dan

2010 IOM SS
YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust
http://www.camaro5.com/forums/showth...&highlight=ysi
racesloth is offline   Reply With Quote
Old 05-08-2017, 04:46 AM   #26
racesloth
Dan
 
Drives: 2010 Camaro 2SS IOM
Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 862
All YSi components have arrived....

RGS Motorsports in Wellingborough UK had a little get together of sorts on Sat. I wanted to put my Camaro up on the dyno before I start taking it apart to install the new cam and supercharger. It laid down 495rwhp at 6000rpms on a Dyno Dynamics dyno which I think is reading a bit high. More realistic is probably 475rwhp but that is just by comparing it to other Camaros on the site with similar mods....

I have a car event coming up on June 11 (American Speedfest) and I know if I start taking it apart I probably won't have everything and the tune worked out between now and then. So I will start on the mods after the 11th...

Gone this weekend to watch the F1 race in Barcelona - it should be a spectacle....
__________________
Dan

2010 IOM SS
YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust
http://www.camaro5.com/forums/showth...&highlight=ysi
racesloth is offline   Reply With Quote
Old 05-08-2017, 06:35 AM   #27
Bo White


 
Bo White's Avatar
 
Drives: 2010 Summit White 1SS
Join Date: Feb 2012
Location: Vance Alabama
Posts: 7,357
Life starts at 3.47" pulley.....
Bo White is offline   Reply With Quote
Old 05-08-2017, 08:55 AM   #28
racesloth
Dan
 
Drives: 2010 Camaro 2SS IOM
Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 862
Jannetty was predicting 10lbs of boost with 3.60 upper and 7.8 lower..

How would 3.47 or 3.33 work out to boostwise? I would really like to get to a bit over 700 on my stock bottom end. The preminum pump gas here is 94 octane and I can get 25 liters 100% pure meth for $39.
__________________
Dan

2010 IOM SS
YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust
http://www.camaro5.com/forums/showth...&highlight=ysi

Last edited by racesloth; 06-09-2017 at 03:38 PM.
racesloth is offline   Reply With Quote
 
Reply

Tags
cam, id850, twin disc, whipple

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:12 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.