09-26-2018, 01:16 AM | #15 | |
Drives: 2010 Camaro LS-M6 67 Chevelle Wgn Join Date: May 2009
Location: .
Posts: 1,509
|
Quote:
Team Chevelle; How accurate are the mobile dynos??? https://www.chevelles.com/forums/148...ile-dynos.html
__________________
Free Trade is not Fair Trade
I am, we are INDIVISIBLE Invictus, By William Ernest Henley |
|
10-06-2018, 08:10 AM | #16 |
Drives: 2013 ss2 vert l99 Join Date: Apr 2017
Location: South florida
Posts: 150
|
The jagged line is my pull.. not sure what the smooth line is.. 5th gear pull..
|
10-06-2018, 08:30 AM | #17 | |
GPI Sales Consultant
|
Quote:
It looks like it made peak power around 5000rpm and then was rolling over beyond that. Really need a log of what's going on in the PCM to better understand that, but it seems awfully low to me. Was it super hot? Maybe the PCM was yanking out lots of timing. I dunno. Should have stayed and seen what a few other cars did to have a better sense for the dyno's accuracy.
__________________
GPI Max Package 2.0: Brodix BR7 heads/GPI porting, MAX3 cam, ST2116LSR, BSR Max Lift rockers, LS7 LSXR with 103mm TB, Vararam OTR, Mcleod RXT, G-Force/Strange 9" IRS setup with 4.63 gear. 551whp, 11.1@124mph.
Got a question about a GPI product? Feel free to shoot me a message! |
|
10-06-2018, 08:42 PM | #18 |
Drives: 2014 Camaro 1SS Join Date: Jun 2010
Location: MA
Posts: 103
|
Who would set up a dyno graph with RPM on the left axis. And time on the bottom. And no torque (yes you can calculate it from RPM and HP but why make me do that?). That graph hurts my head.
__________________
2014 1SS - BTR Stg3, GMPP CNC Heads, Kooks LTs & cats, Magnaflow 2.5" Street w/Res X, Z28 CAI
Last edited by marklsx; 10-06-2018 at 08:43 PM. Reason: typo |
10-07-2018, 01:42 AM | #19 |
Boosted Moderator
|
Why a 5th gear pull?
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
10-07-2018, 09:26 AM | #20 |
old school chevy rodder
Drives: 2013 2SS/RS Manual,DM exhaust,CRT Join Date: Jul 2012
Location: Oregon
Posts: 5,588
|
Man that's a messed up reading...LOL here what to look for.... an old dyno sheet of my last engine
see where the this and that are on the graph the display also shows that while its running on the dyno, the correction factor is SAE which is correct on yours but that display is messed up..... Engine RPM should be along the bottom not what appears to be TIME...WTF...…… AFR would be nice also...the lines should have been Torque and HP which should cross around 5200 on all dynos.... no matter what HP is figured off the Torque BTW...…. What ever you can figure off that screen PIC it appears to me you had it shut down by 6000 rpm and there is what power on the right...WTF...…..???????? 375 hp and guess the smoother line is supposed to be torque? around there also but where they cross WTF ouch brain fart..twice WTF....did you let first grader do the dyno? And no one does a fifth gear in overdrive pull its the ratio that matters in the calculations done by the software to interpret things with 1 to 1 being fourth so man its messed up on so many levels...did they give you a sheet and did it have crayon picture of a kitty cat???? Sorry but SARCASM IS HOW I SURVIVE...LOL god bless yah, just chalk it up to experience and move on to another tuner please for gods sake... and show him this screen shot pic he may have pity and charge you less to show others on his website how screwed up the competition is..lord know my tuner the best out in the NW does tell about others screw ups on his facebook…. that's bread and butter let alone having two electrical engineering degrees...…. why I wait in line to see him and STFU for months.... read some of the recommendations..... a couple are mine I am on there long ago a couple places I am Mark.... and good luck to you I am sure theres better than the bozo you got down around there...… https://www.facebook.com/Wongs-Perfo...-115667950915/ There will always be the chance you got someone on a off day and they will redo the tune and dyno for free if they are good as word of mouth is bread and butter on the table to speak to many out there ….and what spurs business, or then there is the bigger chance your just going to have to suck it up buttercup and write it off..... and bad mouth of course because no one wants to be screwed. But hey a "mobile" dyno is about bragging rights at a car show still it should be able to accurately show things, and tuning the car right should come on a dyno but many just do preloaded handheld tunes which must be what your operating off of..... as Making pulls is not tuning.... And said you never had a correct dyno tune as your no doubt leaving power on the table even if its tuned by a similar vehicles tune with the exact same mods..... and if your really not tuned well you may just go boom...…….
__________________
2021 Wild Cherry ZL1 A10, Sunroof, Data, Carbon, Nav, RotoFab Dry CAI, Elite x2, Borla ATK, Driveshaft shop
Last edited by christianchevell; 10-07-2018 at 10:02 AM. |
10-07-2018, 12:57 PM | #21 |
Drives: 2013 ss2 vert l99 Join Date: Apr 2017
Location: South florida
Posts: 150
|
Thanks guys, that makes me feel a lot better.. I'm sure I'm leaving power on the table.. did some ve tuning and some wot pulls today.. actually had knock on one pull (tuning it out now)..
|
10-07-2018, 01:02 PM | #22 |
Drives: 2012 M6 Camaro SS (RIP) Join Date: Nov 2014
Location: Virginia
Posts: 1,684
|
Looks like a Supras dyno sheet, nothing nothing nothing then hey there's the turbo
__________________
Speed engineering 1 7/8 LTs, CAI inc Cold Air Intake, offroad connectors, Solo performance axle back with J pipes, tune, and in need of a driver mod LOL
|
|
|
Thread Tools | |
|
|