Need help finding part!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BPickle23 · 04-21-2020, 01:42 PM

So during my replacement of the spring isolater for the supercharger I managed to break the small aluminum fitting that one of my vacuum lines from the actuator on the snout connects to. Currently still trying to get the rest of the fitting out of the hole without damaging anything. But I can not find a replacement for this thing anywhere.
To clarify it is on the passenger side on the front of the supercharger right behind actuator from snout. Any help appreciated!!

Bigtime53 · 04-21-2020, 03:24 PM

Your best bet is to call one of the shops that polishes and ports the throttle bodies and see if they could help you. Look on the vendor site here and give them a call. I doubt you can get that from a GM dealer. Good luck

Juiced1 · 04-22-2020, 10:22 AM

Take a picture and post it. Or email it to us at info@juicedmotorsports.com and we'll take a look. If you broke off what I think you did you might be in some trouble but a good welding should be able to repair it.

04-21-2020, 01:42 PM	#1
BPickle23 Drives: 2014 ZL1 Join Date: Oct 2019 Location: Owensboro, KY Posts: 8	Need help finding part!! So during my replacement of the spring isolater for the supercharger I managed to break the small aluminum fitting that one of my vacuum lines from the actuator on the snout connects to. Currently still trying to get the rest of the fitting out of the hole without damaging anything. But I can not find a replacement for this thing anywhere. To clarify it is on the passenger side on the front of the supercharger right behind actuator from snout. Any help appreciated!!

04-21-2020, 03:24 PM	#2
Bigtime53 Drives: 2015 ZL1 Join Date: Mar 2013 Location: Oklahoma Posts: 2,011	Your best bet is to call one of the shops that polishes and ports the throttle bodies and see if they could help you. Look on the vendor site here and give them a call. I doubt you can get that from a GM dealer. Good luck

04-22-2020, 10:22 AM	#3
Juiced1 Account Suspended Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011 Location: St. Charles, IL Posts: 18,683	Take a picture and post it. Or email it to us at info@juicedmotorsports.com and we'll take a look. If you broke off what I think you did you might be in some trouble but a good welding should be able to repair it.