12-30-2011, 01:21 PM | #1 |
Drives: 1LT Join Date: Feb 2010
Location: Chicago
Posts: 954
|
Is it safe to remove paint with a paint thinner/remover...
Painted my bezels but want to go a different route and I need to get the paint off, they won't sand off so I was thinking using a remover/thinner to get the paint off. Would it damage the bezels?
__________________
-21" GM wheels -3.73 gears -Injen PowerFlow CAI
-OBX LT headers -Doug Thorley Catback exhaust -Magnaflow High Flow cats -Trifecta Tune -VMAX Ported TB -Maces 25mm Insulator -Ported Intake manifolds (soon) |
12-30-2011, 01:25 PM | #2 |
Let's go Rangers!
|
I would imagine it may melt the bezels (as the are plastic). You can pick up a brand new set for around $60.
|
12-30-2011, 01:25 PM | #3 |
Drives: 2011 2ss/rs conv, L99/Automatic Join Date: Jun 2011
Location: Georgetown, Kentucky
Posts: 124
|
If the Bezels are plastic, paint thinner will damage them. if you are just wanting to change their color again, use a "Scotch-Brite " pad to scuff up the surface, and repaint them. no big deal.
|
12-30-2011, 01:29 PM | #4 | |
Delivered 05/20/2009
Drives: Black 2010 2SS RS Join Date: Apr 2009
Location: Allen, TX
Posts: 330
|
If they are plastic Lacquer thinner will work but it might damage the chrome finish. Paint remover will definitly damage the plastic, it is very harsh. If they are metal either one would be fine.
Quote:
HAHA Mouse beat me.... |
|
12-30-2011, 01:32 PM | #5 |
Drives: 1LT Join Date: Feb 2010
Location: Chicago
Posts: 954
|
I am going to get them vineled and the guy at the place said I have to remove the paint before they do anything to it. Would scotch-brite get all the paint off?
__________________
-21" GM wheels -3.73 gears -Injen PowerFlow CAI
-OBX LT headers -Doug Thorley Catback exhaust -Magnaflow High Flow cats -Trifecta Tune -VMAX Ported TB -Maces 25mm Insulator -Ported Intake manifolds (soon) |
12-30-2011, 01:33 PM | #6 |
Drives: 2011 2ss/rs conv, L99/Automatic Join Date: Jun 2011
Location: Georgetown, Kentucky
Posts: 124
|
Yep Mouse beat you "Coop 2010"
|
12-30-2011, 01:35 PM | #7 |
Drives: 2011 2ss/rs conv, L99/Automatic Join Date: Jun 2011
Location: Georgetown, Kentucky
Posts: 124
|
No! it just dulls the surface. preparing for repaint adhesion.
|
12-30-2011, 01:46 PM | #8 |
Drives: 1LT Join Date: Feb 2010
Location: Chicago
Posts: 954
|
so whats the best thing to do if I am going to get them vineled?
__________________
-21" GM wheels -3.73 gears -Injen PowerFlow CAI
-OBX LT headers -Doug Thorley Catback exhaust -Magnaflow High Flow cats -Trifecta Tune -VMAX Ported TB -Maces 25mm Insulator -Ported Intake manifolds (soon) |
12-30-2011, 11:12 PM | #9 |
Drives: 1LT Join Date: Feb 2010
Location: Chicago
Posts: 954
|
any ideas?
__________________
-21" GM wheels -3.73 gears -Injen PowerFlow CAI
-OBX LT headers -Doug Thorley Catback exhaust -Magnaflow High Flow cats -Trifecta Tune -VMAX Ported TB -Maces 25mm Insulator -Ported Intake manifolds (soon) |
12-30-2011, 11:28 PM | #10 |
Drives: 2014 1LS M6 Supercharged Join Date: Feb 2011
Location: New Britain, Ct
Posts: 937
|
Use the Paint thinner, Paint thinner will effect the Bezel, if the Bezel was soaked in the Thinner, but your just using a rag to wipe off the paint. Just do a little at a time and not soak the rag to much and you should be o.k. I have done the same thing using Acidtone. After you remove the paint from a section wipe it good with a clean towel
|
12-31-2011, 12:00 AM | #11 |
Drives: '10 Black/IOM Camaro SS/RS Join Date: Mar 2010
Location: Fayetteville NC
Posts: 530
|
soke it in brake fluid and it will come off, used it to take the paint off my bowtie after the paint cracked
__________________
2010 Camaro 2SS/RS Black/IOM //// 1998 Pontiac Trans AM 819 RWHP @ 12 PSI (Turbo)
|
01-02-2012, 12:53 PM | #12 | |
My Dream Car
Drives: 2011 SIM LS3 1SS Join Date: Jul 2009
Location: staten island
Posts: 1,534
|
Quote:
__________________
CAI intake/ADM Scoop/Stainless Power Headers/Dynatech cat back exhaust/Vitesse Throttle Control/ Ported Throttle Body/QTP Electric Cutouts/ 3.91 gears and janetty rear posi/ Tuned by Janetty racing
|
|
01-02-2012, 01:57 PM | #13 |
Virologist in the making
Drives: 2010 VR SS/RS LS3 Join Date: Aug 2009
Location: El Paso TX
Posts: 2,865
|
What is vineled? Why would paint inhibit the process? Personally I would use the paint thinner to rub the paint off using an old rag. The plastic may be damaged by it but your not going to leave the bezel soaking in 100% acetone overnight. Ive used acetone to remove paint from plastics, its no big deal.
__________________
Victory Red 1SS/RS Ordered - 8/4/09 & Joined Camaro5.com family
6000, Delivered to the customer - 12/21/09 |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Paint your own stripes? | blackZbandit | Cosmetics and Lighting Modification Discussions | 44 | 09-18-2011 09:22 AM |
does any know to remove strips without damaging the paint | supersnake09 | Cosmetics and Lighting Modification Discussions | 7 | 01-28-2011 07:25 AM |
How to remove or fix gm touch up paint? | 2010 Bumblebee | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 13 | 03-19-2010 09:48 PM |
Remove paint from headlights... | DarkDragon85 | 4th Generation Camaros | 9 | 02-26-2009 06:10 PM |