Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Roto-Fab
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro Price | Ordering | Tracking | Dealers Discussions > Guides, Manuals, Bulletins, Documentation Archive


Reply
 
Thread Tools
Old 05-22-2016, 11:49 AM   #1
Cami-Girl
 
Drives: 2013 Camaro 2LS
Join Date: Apr 2016
Location: Nevada
Posts: 12
Need correct OEM part numbers

RE: 2013 2LS...Can anyone tell me the correct OEM part numbers for:

(1) Rear bumper facia face/cover (less the holes located on either side of the back-up lights and less the obstacle detection sensor).
(2) Rear bumper exhaust facia molding, black.

Also, when they talk about the "rivet strip", are there actual rivets I would have to deal with to remove and replace the facia and the molding or do I get lucky and only have to remove bolts and screws?
Cami-Girl is offline   Reply With Quote
Old 05-23-2016, 01:22 PM   #2
Mr. Stacy
El Duderino
 
Mr. Stacy's Avatar
 
Drives: 2011 2LTRS Convertible
Join Date: Jan 2016
Location: Seattle
Posts: 2,189
There are two versions based on how the vehicle is equipped:

Most of the part numbers can be found here:

https://www.gmpartsonline.net/parts/...iagram=CD10665

It looks like there are a few rivets that will need to be removed, replaced. #9 and #11 on the diagram. However you may not have to get to these.

Somebody who has done it might be able to chime in here...
__________________
I bowl. Drive around. The occasional acid flashback.
Mr. Stacy is offline   Reply With Quote
Old 05-23-2016, 09:13 PM   #3
Cami-Girl
 
Drives: 2013 Camaro 2LS
Join Date: Apr 2016
Location: Nevada
Posts: 12
Quote:
Originally Posted by Mr. Stacy View Post
There are two versions based on how the vehicle is equipped:

Most of the part numbers can be found here:

https://www.gmpartsonline.net/parts/...iagram=CD10665

It looks like there are a few rivets that will need to be removed, replaced. #9 and #11 on the diagram. However you may not have to get to these.

Somebody who has done it might be able to chime in here...


Yeah, I found this one too, but from what I could figure out on this site, they only had the diagram for the 1LS. This one shows the holes on either side of the back-up lights....my car does not have these.
Since this facia is plastic, do you know if they've come up with some sort of "Bondo" that can be applied on plastic yet? Maybe some sort of an apoxy?
If there is, then I'd only have to replace the bumper molding.
Cami-Girl is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:34 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.