Personal best 11/9 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

grocerygetter · 11-09-2013, 10:11 PM

1kft track.
Post cam swap.
I will post a pic of the time slips in my cam swap thread.
Made three passes...all three were the same ET for 1kft...8.87. The 60' times were 1.60, 1.61, 1.57...so the joker was consistent. I was having some traction issues the top of second gear so there may be more in it. Slip reads like this:
1.57 60'
4.50 330'
6.92 1/8
102.95 1/8 mph
8.87 1000'
115.21 1000'mph
539 DA

Should be good for a 10.5-7 in the quarter. That full weight street car action. I can't say enough positive about Ryan and GPI. Thanks to him and you other guys that have given feedback.
Thou shalt fear no gt500! Lol

Rhino79 · 11-09-2013, 10:46 PM

I like. Skinnies and some weight reduction....probably capable of a 40. Good passes and killer consistency.

grocerygetter · 11-09-2013, 11:05 PM

I'm gonna run the mt's till they croak then switch to a ccw classic track pack I think/dream. Weld if nothing else.
Btw, took off an endlink on one side out front, made the car easier to launch.

Merc · 11-10-2013, 02:58 AM

grocerygetter · 11-10-2013, 07:36 AM

Our track is 1kft like the post shows. I honestly haven't run a 1/4 with the car yet...but I fully expect it to be mid 10s as does ryan...converter is locked through fourth and it runs the snot out of the back end of the track. 3.70 gears. That was the same tune that dyno'd 628. VVT cam pulls hard whole track.

MANNYS2SS/RS · 11-10-2013, 09:27 AM

Congrat's

SmokedSS · 11-10-2013, 10:34 AM

Congrats, nice run

SolomonAKOO · 11-10-2013, 11:03 AM

Congrats man!! Hope to see some videos here pretty soon!

GretchenGotGrowl · 11-10-2013, 11:39 AM

Very nice John! Slicks and Skinnies...all I'm gonna say.

Muddflap · 11-10-2013, 12:39 PM

Nice ET and 60!! Congrats bro

62nalide · 11-10-2013, 01:58 PM

Very nice!

Camarojt · 11-10-2013, 04:36 PM

Gettin it done man! Way to go!

grocerygetter · 11-12-2013, 01:54 PM

slips attached

Muddflap · 11-12-2013, 01:59 PM

Quote:

Originally Posted by grocerygetter

slips attached

That's moving on down the road right there!!!

11-09-2013, 10:11 PM	#1
grocerygetter instigator Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010 Location: 72034 Posts: 3,979 View My Garage	Personal best 11/9 1kft track. Post cam swap. I will post a pic of the time slips in my cam swap thread. Made three passes...all three were the same ET for 1kft...8.87. The 60' times were 1.60, 1.61, 1.57...so the joker was consistent. I was having some traction issues the top of second gear so there may be more in it. Slip reads like this: 1.57 60' 4.50 330' 6.92 1/8 102.95 1/8 mph 8.87 1000' 115.21 1000'mph 539 DA Should be good for a 10.5-7 in the quarter. That full weight street car action. I can't say enough positive about Ryan and GPI. Thanks to him and you other guys that have given feedback. Thou shalt fear no gt500! Lol __________________ -John S.

11-09-2013, 11:05 PM	#3
grocerygetter instigator Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010 Location: 72034 Posts: 3,979 View My Garage	I'm gonna run the mt's till they croak then switch to a ccw classic track pack I think/dream. Weld if nothing else. Btw, took off an endlink on one side out front, made the car easier to launch. __________________ -John S.

11-10-2013, 02:58 AM	#4
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,291	__________________ My Build Thread

11-10-2013, 07:36 AM	#5
grocerygetter instigator Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010 Location: 72034 Posts: 3,979 View My Garage	Our track is 1kft like the post shows. I honestly haven't run a 1/4 with the car yet...but I fully expect it to be mid 10s as does ryan...converter is locked through fourth and it runs the snot out of the back end of the track. 3.70 gears. That was the same tune that dyno'd 628. VVT cam pulls hard whole track. __________________ -John S.

11-10-2013, 09:27 AM	#6
MANNYS2SS/RS Drives: 2010 Camaro 2SS/RS,LS3 Join Date: Oct 2010 Location: South Florida Posts: 1,237	Congrat's __________________ LS-3, ProCharger D1SC 665. rwhp /562. rwtq @ 9.3 psi

11-09-2013, 10:46 PM	#2
Rhino79 Drives: 2010 Camaro SS L99/Auto Join Date: Jul 2011 Location: Cabot, AR Posts: 2,827 View My Garage	I like. Skinnies and some weight reduction....probably capable of a 40. Good passes and killer consistency.

11-10-2013, 10:34 AM	#7
SmokedSS Guest Drives: 2011 2SS / RS A6 Join Date: Oct 2011 Location: Moving On Posts: 464 View My Garage	Congrats, nice run

11-10-2013, 11:03 AM	#8
SolomonAKOO Drives: 2011 2SS/RS Join Date: Apr 2012 Location: Wyoming Posts: 1,210 View My Garage	Congrats man!! Hope to see some videos here pretty soon! __________________ 1 7/8" TSP headers straight piped, Custom Tick Performance cam w/ supporting mods, 1" BMR springs and other BMR suspension mods. Tuned with HPtuners by Matt@FSP

11-10-2013, 11:39 AM	#9
GretchenGotGrowl Drives: 11 F150 EB/13 Sonic RS/15 Z06 Join Date: Sep 2010 Location: Little Rock, AR Posts: 7,129 View My Garage	Very nice John! Slicks and Skinnies...all I'm gonna say. __________________ New Ride -- 2015 Z06 2LZ (stock) -- Journal Old Ride -- 2012 Camaro 2LT/RS (647 RWHP & 726 RWTQ) -- Build Thread

11-10-2013, 12:39 PM	#10
Muddflap Drives: 2010 Camaro SS Join Date: Apr 2013 Location: Longview, Tx Posts: 797	Nice ET and 60!! Congrats bro __________________ TSP 1 7/8 LT, ADM Race Cold Air w/ Race Scoop, GPI SS3 LS3 Cam, Powerbond UD, 3.91 Gears, GPI Posi Mod. 498RWHP/451RWTQ

11-10-2013, 01:58 PM	#11
62nalide Drives: 2013 SS Join Date: May 2013 Location: DFW Posts: 4,102	Very nice! __________________ https://frankensteined.net/ Martin@Frankensteined.net

11-10-2013, 04:36 PM	#12
Camarojt Drives: 2011camaro SS Join Date: Nov 2012 Location: Allen, Tx Posts: 2,201	Gettin it done man! Way to go!

11-12-2013, 01:54 PM	#13
grocerygetter instigator Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010 Location: 72034 Posts: 3,979 View My Garage	slips attached Attached Images __________________ -John S.